Result:
found more than 1183 distributions - search limited to the first 2001 files matching your query
( run in 1.990 )
HiPi-BCM2835
view release on metacpan or search on metacpan
BCM2835/src/install-sh view on Meta::CPAN
# Put in absolute file names if you don't have them in your path;
# or use environment vars.
chgrpprog=${CHGRPPROG-chgrp}
chmodprog=${CHMODPROG-chmod}
chownprog=${CHOWNPROG-chown}
cmpprog=${CMPPROG-cmp}
cpprog=${CPPROG-cp}
mkdirprog=${MKDIRPROG-mkdir}
mvprog=${MVPROG-mv}
rmprog=${RMPROG-rm}
BCM2835/src/install-sh view on Meta::CPAN
# Desired mode of installed file.
mode=0755
chgrpcmd=
chmodcmd=$chmodprog
chowncmd=
mvcmd=$mvprog
rmcmd="$rmprog -f"
stripcmd=
src=
BCM2835/src/install-sh view on Meta::CPAN
-c (ignored)
-C install only if different (preserve the last data modification time)
-d create directories instead of installing files.
-g GROUP $chgrpprog installed files to GROUP.
-m MODE $chmodprog installed files to MODE.
-o USER $chownprog installed files to USER.
-s $stripprog installed files.
-t DIRECTORY install into DIRECTORY.
-T report an error if DSTFILE is a directory.
Environment variables override the default commands:
BCM2835/src/install-sh view on Meta::CPAN
echo "$0: invalid mode: $mode" >&2
exit 1;;
esac
shift;;
-o) chowncmd="$chownprog $2"
shift;;
-s) stripcmd=$stripprog;;
-t) dst_arg=$2
BCM2835/src/install-sh view on Meta::CPAN
fi
fi
fi
if test -n "$dir_arg"; then
{ test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
{ test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
{ test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
else
# Make a couple of temp file names in the proper directory.
dsttmp=$dstdir/_inst.$$_
BCM2835/src/install-sh view on Meta::CPAN
#
# If any of these fail, we abort the whole thing. If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $cpprog $src $dsttmp" command.
#
{ test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
{ test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
{ test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
{ test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
# If -C, don't bother to copy if it wouldn't change the file.
Horus
view release on metacpan or search on metacpan
KEY_chdir|5.003007||Viu
KEY_CHECK|5.006000||Viu
KEY_chmod|5.003007||Viu
KEY_chomp|5.003007||Viu
KEY_chop|5.003007||Viu
KEY_chown|5.003007||Viu
KEY_chr|5.003007||Viu
KEY_chroot|5.003007||Viu
KEY_close|5.003007||Viu
KEY_closedir|5.003007||Viu
KEY_cmp|5.003007||Viu
PERL_LANGINFO_H|5.027004||Viu
PERL_LAST_5_18_0_INTERP_MEMBER|5.017009||Viu
Perl_ldexp|5.021003||Viu
PerlLIO_access|5.005000||Viu
PerlLIO_chmod|5.005000||Viu
PerlLIO_chown|5.005000||Viu
PerlLIO_chsize|5.005000||Viu
PerlLIO_close|5.005000||Viu
PerlLIO_dup2|5.005000||Viu
PerlLIO_dup2_cloexec|5.027008||Viu
PerlLIO_dup|5.005000||Viu
Hyperscan
view release on metacpan or search on metacpan
KEY_chdir|5.003007||Viu
KEY_CHECK|5.006000||Viu
KEY_chmod|5.003007||Viu
KEY_chomp|5.003007||Viu
KEY_chop|5.003007||Viu
KEY_chown|5.003007||Viu
KEY_chr|5.003007||Viu
KEY_chroot|5.003007||Viu
KEY_close|5.003007||Viu
KEY_closedir|5.003007||Viu
KEY_cmp|5.003007||Viu
PERL_LANGINFO_H|5.027004||Viu
PERL_LAST_5_18_0_INTERP_MEMBER|5.017009||Viu
Perl_ldexp|5.021003||Viu
PerlLIO_access|5.005000||Viu
PerlLIO_chmod|5.005000||Viu
PerlLIO_chown|5.005000||Viu
PerlLIO_chsize|5.005000||Viu
PerlLIO_close|5.005000||Viu
PerlLIO_dup2|5.005000||Viu
PerlLIO_dup2_cloexec|5.027008||Viu
PerlLIO_dup|5.005000||Viu
IO-AIO
view release on metacpan or search on metacpan
aio_stat aio_lstat aio_unlink aio_rmdir aio_readdir aio_readdirx
aio_scandir aio_symlink aio_readlink aio_realpath aio_fcntl aio_ioctl
aio_sync aio_fsync aio_syncfs aio_fdatasync aio_sync_file_range
aio_pathsync aio_readahead aio_fiemap aio_allocate
aio_rename aio_rename2 aio_link aio_move aio_copy aio_group
aio_nop aio_mknod aio_load aio_rmtree aio_mkdir aio_chown
aio_chmod aio_utime aio_truncate
aio_msync aio_mtouch aio_mlock aio_mlockall
aio_statvfs
aio_slurp
aio_wd);
aio_readahead $fh,$offset,$length, $callback->($retval)
aio_stat $fh_or_path, $callback->($status)
aio_lstat $fh, $callback->($status)
aio_statvfs $fh_or_path, $callback->($statvfs)
aio_utime $fh_or_path, $atime, $mtime, $callback->($status)
aio_chown $fh_or_path, $uid, $gid, $callback->($status)
aio_chmod $fh_or_path, $mode, $callback->($status)
aio_truncate $fh_or_path, $offset, $callback->($status)
aio_allocate $fh, $mode, $offset, $len, $callback->($status)
aio_fiemap $fh, $start, $length, $flags, $count, $cb->(\@extents)
aio_unlink $pathname, $callback->($status)
aio_utime "path", undef, undef;
# set atime to current time and mtime to beginning of the epoch:
aio_utime "path", time, undef; # undef==0
=item aio_chown $fh_or_path, $uid, $gid, $callback->($status)
Works like perl's C<chown> function, except that C<undef> for either $uid
or $gid is being interpreted as "do not change" (but -1 can also be used).
Examples:
# same as "chown root path" in the shell:
aio_chown "path", 0, -1;
# same as above:
aio_chown "path", 0, undef;
=item aio_truncate $fh_or_path, $offset, $callback->($status)
Works like truncate(2) or ftruncate(2).
my $ch = sub {
aioreq_pri $pri;
add $grp aio_chmod $dst_fh, $stat[2] & 07777, sub {
aioreq_pri $pri;
add $grp aio_chown $dst_fh, $stat[4], $stat[5], sub {
aioreq_pri $pri;
add $grp aio_close $dst_fh;
}
};
};
IO-Die
view release on metacpan or search on metacpan
lib/IO/Die.pm view on Meta::CPAN
to have this module perform a given operation. For example:
open( GLOBALS_R_BAD, '>somefile' );
IO::Die->open( my $good_fh, '>', 'somefile');
chown( $uid, $gid, qw( file1 file2 file 3 ) );
IO::Die->chown( $uid, $gid, $_ ) for ( qw( file1 file2 file3 ) );
print { $wfh } 'Haha';
IO::Die->print( $wfh, 'Haha' );
(And, yes, unlike C<autodie>, C<IO::Die> has a C<print()> function!)
lib/IO/Die.pm view on Meta::CPAN
Only the four-argument form is permitted.
=head2 chmod()
=head2 chown()
=head2 kill()
=head2 unlink()
IO-FD
view release on metacpan or search on metacpan
KEY_chdir|5.003007||Viu
KEY_CHECK|5.006000||Viu
KEY_chmod|5.003007||Viu
KEY_chomp|5.003007||Viu
KEY_chop|5.003007||Viu
KEY_chown|5.003007||Viu
KEY_chr|5.003007||Viu
KEY_chroot|5.003007||Viu
KEY_close|5.003007||Viu
KEY_closedir|5.003007||Viu
KEY_cmp|5.003007||Viu
PERL_LANGINFO_H|5.027004||Viu
PERL_LAST_5_18_0_INTERP_MEMBER|5.017009||Viu
Perl_ldexp|5.021003|5.021003|n
PerlLIO_access|5.005000||Viu
PerlLIO_chmod|5.005000||Viu
PerlLIO_chown|5.005000||Viu
PerlLIO_chsize|5.005000||Viu
PerlLIO_close|5.005000||Viu
PerlLIO_dup2|5.005000||Viu
PerlLIO_dup2_cloexec|5.027008||Viu
PerlLIO_dup|5.005000||Viu
IO-File-AtomicChange
view release on metacpan or search on metacpan
lib/IO/File/AtomicChange.pm view on Meta::CPAN
sub copy_modown_to_temp {
my($self) = @_;
my($mode, $uid, $gid) = (stat($self->_target_file))[2,4,5];
chown $uid, $gid, $self->_temp_file;
chmod $mode, $self->_temp_file;
}
sub backup {
my($self) = @_;
lib/IO/File/AtomicChange.pm view on Meta::CPAN
my($from, $to) = @_;
File::Copy::copy($from, $to) or croak $!;
my($mode, $uid, $gid, $atime, $mtime) = (stat($from))[2,4,5,8,9];
chown $uid, $gid, $to;
chmod $mode, $to;
utime $atime, $mtime, $to;
1;
}
IO-SocketAlarm
view release on metacpan or search on metacpan
KEY_chdir|5.003007||Viu
KEY_CHECK|5.006000||Viu
KEY_chmod|5.003007||Viu
KEY_chomp|5.003007||Viu
KEY_chop|5.003007||Viu
KEY_chown|5.003007||Viu
KEY_chr|5.003007||Viu
KEY_chroot|5.003007||Viu
KEY_close|5.003007||Viu
KEY_closedir|5.003007||Viu
KEY_cmp|5.003007||Viu
PERL_LANGINFO_H|5.027004||Viu
PERL_LAST_5_18_0_INTERP_MEMBER|5.017009||Viu
Perl_ldexp|5.021003|5.021003|n
PerlLIO_access|5.005000||Viu
PerlLIO_chmod|5.005000||Viu
PerlLIO_chown|5.005000||Viu
PerlLIO_chsize|5.005000||Viu
PerlLIO_close|5.005000||Viu
PerlLIO_dup2|5.005000||Viu
PerlLIO_dup2_cloexec|5.027008||Viu
PerlLIO_dup|5.005000||Viu
IO-Tty
view release on metacpan or search on metacpan
warn("ERROR: IO::Tty::open_slave: couldn't seteuid to root: %d", errno);
close(*ptyfd);
*ptyfd = -1;
return 0;
}
if (chown(namebuf, euid, -1)) {
warn("ERROR: IO::Tty::open_slave: couldn't fchown the pty: %d", errno);
close(*ptyfd);
*ptyfd = -1;
return 0;
}
if (seteuid(euid)) {
IO
view release on metacpan or search on metacpan
* Also very few spots of negative numgroups for getgroups(), and fgetc() return, but almost all checking is for fcntl.
* merged fix for perl #121743 and perl #121745: hopefully picked up all the fixes-to-fixes from the ticket.
* Fix for Coverity perl5 CIDs 28990..29003,29005..29011,29013,45354,45363,49926
* Argument cannot be negative (NEGATIVE_RETURNS) fd is passed to a parameter that cannot be negative.
* CIDs 29004, 29012: Argument cannot be negative (NEGATIVE_RETURNS) num_groups is passed to a parameter that cannot be negative and because of CIDs 29005 and 29006 also CID 28924.
* In the first set of issues a fd is retrieved from PerlIO_fileno, and that is then used in places like fstat(), fchown(), dup(), etc., without checking whether the fd is valid (>=0).
* In the second set of issues a potentially negative number is potentially passed to getgroups().
* The CIDs 29005 and 29006 were a bit messy: fixing them needed also resolving CID 28924 where the return value of fstat() was ignored, and for completeness adding two croak calls (with perldiag updates): a bit of a waste since it's suidperl code.
IO 1.31 -- Mar 4 2014 (Not released to CPAN)
* dist/IO: Allow to be dual-lived - This dual-lived module has not been able to be compiled on releases earlier than 5.10.1.
IP-World
view release on metacpan or search on metacpan
script/maint_ip_world_db view on Meta::CPAN
# prevent making a root-owned file in blib
my ($old_uid, $old_gid) = (CORE::stat $replfn)[4..5];
my ($new_uid, $new_gid) = (CORE::stat $outfn )[4..5];
if ($new_uid != $old_uid
|| $new_gid != $old_gid) {
chown ($old_uid, $old_gid, $outfn)==1
or die "Can't transfer owner:group from old $replfn to new: $!";
} } }
# old file(s) -> .bak[xx] then new file(s) -> .dat or .le or .be
my @renamers = $dual_out ? (\$outfn, 'le', 'bakle', \$outfn2, 'be', 'bakbe')
: (\$outfn, 'dat', 'bak');
IPC-MM
view release on metacpan or search on metacpan
memory segment is based on files. It corresponds to the function in B<mm>
of the same name.
I<$mm> is the shared memory segment returned by I<mm_create>.
I<$mode>, I<$owner>, and I<$group> are passed directly to chown and chmod.
=item mm_destroy($mm)
This method destroys a shared memory segment created by I<mm_create>.
IPC-PerlSSH
view release on metacpan or search on metacpan
lib/IPC/PerlSSH/Library/FS.pm view on Meta::CPAN
The following perl functions have trivial wrappers that take arguments and
return values in the same way as perl's. They throw exceptions via the
C<IPC::PerlSSH> call when they fail, rather than returning undef, because
otherwise C<$!> would be difficult to obtain.
chown chmod lstat mkdir readlink rename rmdir stat symlink unlink utime
The following functions are imported from L<File::Path> with the following
API adjustments:
mkpath( $path, %opts ) # %opts supports mode, user, group
lib/IPC/PerlSSH/Library/FS.pm view on Meta::CPAN
init q{
use File::Path qw( mkpath rmtree );
};
func chown =>
q{my $uid = shift; my $gid = shift;
chown $uid, $gid, $_ or die "Cannot chown($uid, $gid, '$_') - $!" for @_;};
func chmod =>
q{my $mode = shift;
chmod $mode, $_ or die "Cannot chmod($mode, '$_') - $!" for @_;};
IPTables-IPv4-DBTarpit
view release on metacpan or search on metacpan
# put in absolute paths if you don't have them in your path; or use env. vars.
mvprog="${MVPROG-mv}"
cpprog="${CPPROG-cp}"
chmodprog="${CHMODPROG-chmod}"
chownprog="${CHOWNPROG-chown}"
chgrpprog="${CHGRPPROG-chgrp}"
stripprog="${STRIPPROG-strip}"
rmprog="${RMPROG-rm}"
mkdirprog="${MKDIRPROG-mkdir}"
transformbasename=""
transform_arg=""
instcmd="$mvprog"
chmodcmd="$chmodprog 0755"
chowncmd=""
chgrpcmd=""
stripcmd=""
rmcmd="$rmprog -f"
mvcmd="$mvprog"
src=""
-m) chmodcmd="$chmodprog $2"
shift
shift
continue;;
-o) chowncmd="$chownprog $2"
shift
shift
continue;;
-g) chgrpcmd="$chgrpprog $2"
if [ x"$dir_arg" != x ]
then
$doit $instcmd $dst &&
if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
else
# If any of these fail, we abort the whole thing. If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $instcmd $src $dsttmp" command.
if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
# Now rename the file to the real destination.
Image-BioChrome
view release on metacpan or search on metacpan
lib/Image/BioChrome.pm view on Meta::CPAN
my $uid = $self->{ file }->{ uid };
my $gid = $self->{ file }->{ gid };
my $mode = $self->{ file }->{ mode };
chown($uid, $gid, $file) || do {
warn "chown($file): $!\n" if $VERBOSE;
};
chmod($mode, $file) || do {
warn "chmod($file): $!\n" if $VERBOSE;
};
Image-CCV
view release on metacpan or search on metacpan
ccv-src/lib/3rdparty/sqlite3/sqlite3.c view on Meta::CPAN
static int posixOpen(const char *zFile, int flags, int mode){
return open(zFile, flags, mode);
}
/*
** On some systems, calls to fchown() will trigger a message in a security
** log if they come from non-root processes. So avoid calling fchown() if
** we are not running as root.
*/
static int posixFchown(int fd, uid_t uid, gid_t gid){
return geteuid() ? 0 : fchown(fd,uid,gid);
}
/* Forward reference */
static int openDirectory(const char*, int*);
ccv-src/lib/3rdparty/sqlite3/sqlite3.c view on Meta::CPAN
#define osMkdir ((int(*)(const char*,mode_t))aSyscall[18].pCurrent)
{ "rmdir", (sqlite3_syscall_ptr)rmdir, 0 },
#define osRmdir ((int(*)(const char*))aSyscall[19].pCurrent)
{ "fchown", (sqlite3_syscall_ptr)posixFchown, 0 },
#define osFchown ((int(*)(int,uid_t,gid_t))aSyscall[20].pCurrent)
#if !defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0
{ "mmap", (sqlite3_syscall_ptr)mmap, 0 },
#define osMmap ((void*(*)(void*,size_t,int,int,int,off_t))aSyscall[21].pCurrent)
ccv-src/lib/3rdparty/sqlite3/sqlite3.c view on Meta::CPAN
/* If this process is running as root, make sure that the SHM file
** is owned by the same user that owns the original database. Otherwise,
** the original owner will not be able to connect.
*/
osFchown(pShmNode->h, sStat.st_uid, sStat.st_gid);
/* Check to see if another process is holding the dead-man switch.
** If not, truncate the file to zero length.
*/
rc = SQLITE_OK;
ccv-src/lib/3rdparty/sqlite3/sqlite3.c view on Meta::CPAN
/* If this process is running as root and if creating a new rollback
** journal or WAL file, set the ownership of the journal or WAL to be
** the same as the original database.
*/
if( flags & (SQLITE_OPEN_WAL|SQLITE_OPEN_MAIN_JOURNAL) ){
osFchown(fd, uid, gid);
}
}
assert( fd>=0 );
if( pOutFlags ){
*pOutFlags = flags;
Image-ExifTool
view release on metacpan or search on metacpan
lib/Image/ExifTool/Writer.pl view on Meta::CPAN
my $uid = $self->GetNewValue('FileUserID');
my $gid = $self->GetNewValue('FileGroupID');
if (defined $uid or defined $gid) {
defined $uid or $uid = -1;
defined $gid or $gid = -1;
if (eval { chown($uid, $gid, $file) }) {
$self->VerboseValue('+ FileUserID', $uid) if $uid >= 0;
$self->VerboseValue('+ FileGroupID', $gid) if $gid >= 0;
$result = 1;
} else {
$self->Warn('Error setting FileGroup/UserID');
lib/Image/ExifTool/Writer.pl view on Meta::CPAN
my $newUid = $self->GetNewValue('FileUserID');
my $newGid = $self->GetNewValue('FileGroupID');
if (defined $uid and defined $gid and (not defined $newUid or not defined $newGid)) {
defined $newGid and $gid = $newGid;
defined $newUid and $uid = $newUid;
eval { chown($uid, $gid, $dst) };
}
}
#------------------------------------------------------------------------------
# Get new file path name
Image-Magick-CommandParser
view release on metacpan or search on metacpan
lib/Image/Magick/CommandParser.pm view on Meta::CPAN
I had a failure when installing the module on my laptop for the 1st time. The problem was that,
somehow, during the installation of L<Image::Magick>, root had become the owner of a directory
under the control of perlbrew. To fix this, I had to do:
sudo chown ron:ron /home/ron/perl5/perlbrew/perls/perl-5.20.2/lib/site_perl/5.20.2/x86_64-linux/auto/Image/Magick
=head2 Regions specified as '@100000' are not supported
So, you must put the '@' at the end of the region:
Image-PNG-Data
view release on metacpan or search on metacpan
KEY_chdir|5.003007||Viu
KEY_CHECK|5.006000||Viu
KEY_chmod|5.003007||Viu
KEY_chomp|5.003007||Viu
KEY_chop|5.003007||Viu
KEY_chown|5.003007||Viu
KEY_chr|5.003007||Viu
KEY_chroot|5.003007||Viu
KEY_close|5.003007||Viu
KEY_closedir|5.003007||Viu
KEY_cmp|5.003007||Viu
PERL_LANGINFO_H|5.027004||Viu
PERL_LAST_5_18_0_INTERP_MEMBER|5.017009||Viu
Perl_ldexp|5.021003||Viu
PerlLIO_access|5.005000||Viu
PerlLIO_chmod|5.005000||Viu
PerlLIO_chown|5.005000||Viu
PerlLIO_chsize|5.005000||Viu
PerlLIO_close|5.005000||Viu
PerlLIO_dup2|5.005000||Viu
PerlLIO_dup2_cloexec|5.027008||Viu
PerlLIO_dup|5.005000||Viu
Image-PNG-Libpng
view release on metacpan or search on metacpan
KEY_chdir|5.003007||Viu
KEY_CHECK|5.006000||Viu
KEY_chmod|5.003007||Viu
KEY_chomp|5.003007||Viu
KEY_chop|5.003007||Viu
KEY_chown|5.003007||Viu
KEY_chr|5.003007||Viu
KEY_chroot|5.003007||Viu
KEY_close|5.003007||Viu
KEY_closedir|5.003007||Viu
KEY_cmp|5.003007||Viu
PERL_LANGINFO_H|5.027004||Viu
PERL_LAST_5_18_0_INTERP_MEMBER|5.017009||Viu
Perl_ldexp|5.021003|5.021003|n
PerlLIO_access|5.005000||Viu
PerlLIO_chmod|5.005000||Viu
PerlLIO_chown|5.005000||Viu
PerlLIO_chsize|5.005000||Viu
PerlLIO_close|5.005000||Viu
PerlLIO_dup2|5.005000||Viu
PerlLIO_dup2_cloexec|5.027008||Viu
PerlLIO_dup|5.005000||Viu
Image-PNG-QRCode
view release on metacpan or search on metacpan
KEY_chdir|5.003007||Viu
KEY_CHECK|5.006000||Viu
KEY_chmod|5.003007||Viu
KEY_chomp|5.003007||Viu
KEY_chop|5.003007||Viu
KEY_chown|5.003007||Viu
KEY_chr|5.003007||Viu
KEY_chroot|5.003007||Viu
KEY_close|5.003007||Viu
KEY_closedir|5.003007||Viu
KEY_cmp|5.003007||Viu
PERL_LANGINFO_H|5.027004||Viu
PERL_LAST_5_18_0_INTERP_MEMBER|5.017009||Viu
Perl_ldexp|5.021003||Viu
PerlLIO_access|5.005000||Viu
PerlLIO_chmod|5.005000||Viu
PerlLIO_chown|5.005000||Viu
PerlLIO_chsize|5.005000||Viu
PerlLIO_close|5.005000||Viu
PerlLIO_dup2|5.005000||Viu
PerlLIO_dup2_cloexec|5.027008||Viu
PerlLIO_dup|5.005000||Viu
Image-PNG-Simple
view release on metacpan or search on metacpan
libpng-1.6.17/install-sh view on Meta::CPAN
# Put in absolute file names if you don't have them in your path;
# or use environment vars.
chgrpprog=${CHGRPPROG-chgrp}
chmodprog=${CHMODPROG-chmod}
chownprog=${CHOWNPROG-chown}
cmpprog=${CMPPROG-cmp}
cpprog=${CPPROG-cp}
mkdirprog=${MKDIRPROG-mkdir}
mvprog=${MVPROG-mv}
rmprog=${RMPROG-rm}
libpng-1.6.17/install-sh view on Meta::CPAN
# Desired mode of installed file.
mode=0755
chgrpcmd=
chmodcmd=$chmodprog
chowncmd=
mvcmd=$mvprog
rmcmd="$rmprog -f"
stripcmd=
src=
libpng-1.6.17/install-sh view on Meta::CPAN
-c (ignored)
-C install only if different (preserve the last data modification time)
-d create directories instead of installing files.
-g GROUP $chgrpprog installed files to GROUP.
-m MODE $chmodprog installed files to MODE.
-o USER $chownprog installed files to USER.
-s $stripprog installed files.
-t DIRECTORY install into DIRECTORY.
-T report an error if DSTFILE is a directory.
Environment variables override the default commands:
libpng-1.6.17/install-sh view on Meta::CPAN
echo "$0: invalid mode: $mode" >&2
exit 1;;
esac
shift;;
-o) chowncmd="$chownprog $2"
shift;;
-s) stripcmd=$stripprog;;
-t)
libpng-1.6.17/install-sh view on Meta::CPAN
fi
fi
fi
if test -n "$dir_arg"; then
{ test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
{ test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
{ test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
else
# Make a couple of temp file names in the proper directory.
dsttmp=$dstdir/_inst.$$_
libpng-1.6.17/install-sh view on Meta::CPAN
#
# If any of these fail, we abort the whole thing. If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $cpprog $src $dsttmp" command.
#
{ test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
{ test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
{ test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
{ test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
# If -C, don't bother to copy if it wouldn't change the file.
Image-WebP
view release on metacpan or search on metacpan
webp-src/install-sh view on Meta::CPAN
# Put in absolute file names if you don't have them in your path;
# or use environment vars.
chgrpprog=${CHGRPPROG-chgrp}
chmodprog=${CHMODPROG-chmod}
chownprog=${CHOWNPROG-chown}
cmpprog=${CMPPROG-cmp}
cpprog=${CPPROG-cp}
mkdirprog=${MKDIRPROG-mkdir}
mvprog=${MVPROG-mv}
rmprog=${RMPROG-rm}
webp-src/install-sh view on Meta::CPAN
# Desired mode of installed file.
mode=0755
chgrpcmd=
chmodcmd=$chmodprog
chowncmd=
mvcmd=$mvprog
rmcmd="$rmprog -f"
stripcmd=
src=
webp-src/install-sh view on Meta::CPAN
-c (ignored)
-C install only if different (preserve the last data modification time)
-d create directories instead of installing files.
-g GROUP $chgrpprog installed files to GROUP.
-m MODE $chmodprog installed files to MODE.
-o USER $chownprog installed files to USER.
-s $stripprog installed files.
-t DIRECTORY install into DIRECTORY.
-T report an error if DSTFILE is a directory.
Environment variables override the default commands:
webp-src/install-sh view on Meta::CPAN
echo "$0: invalid mode: $mode" >&2
exit 1;;
esac
shift;;
-o) chowncmd="$chownprog $2"
shift;;
-s) stripcmd=$stripprog;;
-t) dst_arg=$2
webp-src/install-sh view on Meta::CPAN
fi
fi
fi
if test -n "$dir_arg"; then
{ test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
{ test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
{ test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
else
# Make a couple of temp file names in the proper directory.
dsttmp=$dstdir/_inst.$$_
webp-src/install-sh view on Meta::CPAN
#
# If any of these fail, we abort the whole thing. If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $cpprog $src $dsttmp" command.
#
{ test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
{ test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
{ test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
{ test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
# If -C, don't bother to copy if it wouldn't change the file.
Imager-QRCode
view release on metacpan or search on metacpan
vendor/qrencode-3.4.2/use/install-sh view on Meta::CPAN
# Put in absolute file names if you don't have them in your path;
# or use environment vars.
chgrpprog=${CHGRPPROG-chgrp}
chmodprog=${CHMODPROG-chmod}
chownprog=${CHOWNPROG-chown}
cmpprog=${CMPPROG-cmp}
cpprog=${CPPROG-cp}
mkdirprog=${MKDIRPROG-mkdir}
mvprog=${MVPROG-mv}
rmprog=${RMPROG-rm}
vendor/qrencode-3.4.2/use/install-sh view on Meta::CPAN
# Desired mode of installed file.
mode=0755
chgrpcmd=
chmodcmd=$chmodprog
chowncmd=
mvcmd=$mvprog
rmcmd="$rmprog -f"
stripcmd=
src=
vendor/qrencode-3.4.2/use/install-sh view on Meta::CPAN
-c (ignored)
-C install only if different (preserve the last data modification time)
-d create directories instead of installing files.
-g GROUP $chgrpprog installed files to GROUP.
-m MODE $chmodprog installed files to MODE.
-o USER $chownprog installed files to USER.
-s $stripprog installed files.
-t DIRECTORY install into DIRECTORY.
-T report an error if DSTFILE is a directory.
Environment variables override the default commands:
vendor/qrencode-3.4.2/use/install-sh view on Meta::CPAN
echo "$0: invalid mode: $mode" >&2
exit 1;;
esac
shift;;
-o) chowncmd="$chownprog $2"
shift;;
-s) stripcmd=$stripprog;;
-t) dst_arg=$2
vendor/qrencode-3.4.2/use/install-sh view on Meta::CPAN
fi
fi
fi
if test -n "$dir_arg"; then
{ test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
{ test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
{ test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
else
# Make a couple of temp file names in the proper directory.
dsttmp=$dstdir/_inst.$$_
vendor/qrencode-3.4.2/use/install-sh view on Meta::CPAN
#
# If any of these fail, we abort the whole thing. If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $cpprog $src $dsttmp" command.
#
{ test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
{ test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
{ test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
{ test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
# If -C, don't bother to copy if it wouldn't change the file.
Imager
view release on metacpan or search on metacpan
KEY_chdir|5.003007||Viu
KEY_CHECK|5.006000||Viu
KEY_chmod|5.003007||Viu
KEY_chomp|5.003007||Viu
KEY_chop|5.003007||Viu
KEY_chown|5.003007||Viu
KEY_chr|5.003007||Viu
KEY_chroot|5.003007||Viu
KEY_close|5.003007||Viu
KEY_closedir|5.003007||Viu
KEY_cmp|5.003007||Viu
PERL_LANGINFO_H|5.027004||Viu
PERL_LAST_5_18_0_INTERP_MEMBER|5.017009||Viu
Perl_ldexp|5.021003|5.021003|n
PerlLIO_access|5.005000||Viu
PerlLIO_chmod|5.005000||Viu
PerlLIO_chown|5.005000||Viu
PerlLIO_chsize|5.005000||Viu
PerlLIO_close|5.005000||Viu
PerlLIO_dup2|5.005000||Viu
PerlLIO_dup2_cloexec|5.027008||Viu
PerlLIO_dup|5.005000||Viu
Installer
view release on metacpan or search on metacpan
lib/Installer/cpanm.pm view on Meta::CPAN
$fatpacked{"App/cpanminus/Dependency.pm"} = '#line '.(1+__LINE__).' "'.__FILE__."\"\n".<<'APP_CPANMINUS_DEPENDENCY';
package App::cpanminus::Dependency;use strict;use CPAN::Meta::Requirements;sub from_prereqs {my($class,$prereqs,$phases,$types)=@_;my@deps;for my$type (@$types){push@deps,$class->from_versions($prereqs->merged_requirements($phases,[$type])->as_stri...
APP_CPANMINUS_DEPENDENCY
$fatpacked{"App/cpanminus/script.pm"} = '#line '.(1+__LINE__).' "'.__FILE__."\"\n".<<'APP_CPANMINUS_SCRIPT';
package App::cpanminus::script;use strict;use Config;use Cwd ();use App::cpanminus;use App::cpanminus::Dependency;use File::Basename ();use File::Find ();use File::Path ();use File::Spec ();use File::Copy ();use File::Temp ();use Getopt::Long ();us...
It appears your cpanm executable was installed via `perlbrew install-cpanm`.
cpanm --self-upgrade won't upgrade the version of cpanm you're running.
Run the following command to get it upgraded.
Internals-DumpArenas
view release on metacpan or search on metacpan
OP *Perl_pp_alarm(PerlInterpreter *);
OP *Perl_pp_backtick(PerlInterpreter *);
OP *Perl_pp_bind(PerlInterpreter *);
OP *Perl_pp_binmode(PerlInterpreter *);
OP *Perl_pp_chdir(PerlInterpreter *);
OP *Perl_pp_chown(PerlInterpreter *);
OP *Perl_pp_chroot(PerlInterpreter *);
OP *Perl_pp_close(PerlInterpreter *);
OP *Perl_pp_closedir(PerlInterpreter *);
OP *Perl_pp_dbmopen(PerlInterpreter *);
OP *Perl_pp_die(PerlInterpreter *);
File ../sysdeps/unix/sysv/linux/i386/setresgid.c:
int __setresgid(gid_t, gid_t, gid_t);
File ../sysdeps/unix/sysv/linux/pathconf.c:
long int __pathconf(const char *, int);
long int __statfs_chown_restricted(int, const struct statfs *);
long int __statfs_filesize_max(int, const struct statfs *);
long int __statfs_link_max(int, const struct statfs *);
long int __statfs_symlinks(int, const struct statfs *);
File ../sysdeps/unix/sysv/linux/x86_64/sysconf.c:
char *getwd(char *);
File getdirname.c:
char *get_current_dir_name(void);
File ../sysdeps/unix/sysv/linux/i386/chown.c:
int __chown_is_lchown(const char *, uid_t, gid_t);
int __real_chown(const char *, uid_t, gid_t);
File ../sysdeps/unix/sysv/linux/i386/fchown.c:
int __fchown(int, uid_t, gid_t);
File ../sysdeps/unix/sysv/linux/i386/lchown.c:
int __lchown(const char *, uid_t, gid_t);
File ../sysdeps/unix/sysv/linux/i386/fchownat.c:
int fchownat(int, const char *, uid_t, gid_t, int);
File ../sysdeps/unix/sysv/linux/ttyname.c:
char *ttyname(int);
static char *getttyname(const char *, dev_t, ino64_t, int, int *);
0x0805c2ac calloc@plt
0x0805c2bc endnetent@plt
0x0805c2cc __register_atfork@plt
0x0805c2dc setnetent@plt
0x0805c2ec shmat@plt
0x0805c2fc fchown
0x0805c2fc fchown@plt
0x0805c30c write
0x0805c30c write@plt
0x0805c31c tzset
0x0805c31c tzset@plt
0x0805c32c sendto
0x0805ca9c pthread_mutex_lock@plt
0x0805caac sigprocmask
0x0805caac sigprocmask@plt
0x0805cabc setpwent@plt
0x0805cacc getlogin_r@plt
0x0805cadc chown
0x0805cadc chown@plt
0x0805caec __stack_chk_fail@plt
0x0805cafc msgctl
0x0805cafc msgctl@plt
0x0805cb0c getnetent_r
0x0805cb0c getnetent_r@plt
JSON-Create
view release on metacpan or search on metacpan
KEY_chdir|5.003007||Viu
KEY_CHECK|5.006000||Viu
KEY_chmod|5.003007||Viu
KEY_chomp|5.003007||Viu
KEY_chop|5.003007||Viu
KEY_chown|5.003007||Viu
KEY_chr|5.003007||Viu
KEY_chroot|5.003007||Viu
KEY_close|5.003007||Viu
KEY_closedir|5.003007||Viu
KEY_cmp|5.003007||Viu
PERL_LANGINFO_H|5.027004||Viu
PERL_LAST_5_18_0_INTERP_MEMBER|5.017009||Viu
Perl_ldexp|5.021003|5.021003|n
PerlLIO_access|5.005000||Viu
PerlLIO_chmod|5.005000||Viu
PerlLIO_chown|5.005000||Viu
PerlLIO_chsize|5.005000||Viu
PerlLIO_close|5.005000||Viu
PerlLIO_dup2|5.005000||Viu
PerlLIO_dup2_cloexec|5.027008||Viu
PerlLIO_dup|5.005000||Viu
JSON-DWIW
view release on metacpan or search on metacpan
libjsonevt/install-sh view on Meta::CPAN
# Put in absolute file names if you don't have them in your path;
# or use environment vars.
chgrpprog=${CHGRPPROG-chgrp}
chmodprog=${CHMODPROG-chmod}
chownprog=${CHOWNPROG-chown}
cmpprog=${CMPPROG-cmp}
cpprog=${CPPROG-cp}
mkdirprog=${MKDIRPROG-mkdir}
mvprog=${MVPROG-mv}
rmprog=${RMPROG-rm}
libjsonevt/install-sh view on Meta::CPAN
# Desired mode of installed file.
mode=0755
chgrpcmd=
chmodcmd=$chmodprog
chowncmd=
mvcmd=$mvprog
rmcmd="$rmprog -f"
stripcmd=
src=
libjsonevt/install-sh view on Meta::CPAN
-c (ignored)
-C install only if different (preserve the last data modification time)
-d create directories instead of installing files.
-g GROUP $chgrpprog installed files to GROUP.
-m MODE $chmodprog installed files to MODE.
-o USER $chownprog installed files to USER.
-s $stripprog installed files.
-t DIRECTORY install into DIRECTORY.
-T report an error if DSTFILE is a directory.
Environment variables override the default commands:
libjsonevt/install-sh view on Meta::CPAN
echo "$0: invalid mode: $mode" >&2
exit 1;;
esac
shift;;
-o) chowncmd="$chownprog $2"
shift;;
-s) stripcmd=$stripprog;;
-t) dst_arg=$2
libjsonevt/install-sh view on Meta::CPAN
fi
fi
fi
if test -n "$dir_arg"; then
{ test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
{ test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
{ test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
else
# Make a couple of temp file names in the proper directory.
dsttmp=$dstdir/_inst.$$_
libjsonevt/install-sh view on Meta::CPAN
#
# If any of these fail, we abort the whole thing. If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $cpprog $src $dsttmp" command.
#
{ test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
{ test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
{ test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
{ test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
# If -C, don't bother to copy if it wouldn't change the file.
( run in 1.990 second using v1.01-cache-2.11-cpan-71847e10f99 )