view release on metacpan or  search on metacpan

t/data/07-cisco.input  view on Meta::CPAN

sw07#show int status

Port      Name               Status       Vlan       Duplex  Speed Type 
Gi1/0/1   red.antelope.net   connected    1          a-full a-1000 10/100/1000BaseTX
Gi1/0/2   to Sw02            notconnect   210          auto   auto 10/100/1000BaseTX
Gi1/0/3                      disabled     210          auto   auto 10/100/1000BaseTX
Gi1/0/4   BAD::POE-ERRORS    notconnect   1            auto   auto 10/100/1000BaseTX
Gi1/0/5                      notconnect   1            auto   auto 10/100/1000BaseTX
Gi1/0/6                      notconnect   1            auto   auto 10/100/1000BaseTX
Te1/0/7   NNNNNNN Mac Mini   connected    210        a-full  a-10G 100/1G/2.5G/5G/10GBaseT
Te1/0/8   802.11AC Office AP connected    trunk      a-full a-5000 100/1G/2.5G/5G/10GBaseT
Te1/0/1   To sw08 et49/5     notconnect   1            full    10G SFP-10GBase-SR
Te1/0/2   To sw08 et49/1     connected    trunk        full    10G SFP-10GBase-SR
Po1       LAG to sw08        connected    trunk      a-full    10G 
sw07#show int transceiver
If device is externally calibrated, only calibrated values are printed.
++ : high alarm, +  : high warning, -  : low warning, -- : low alarm.
NA or N/A: not applicable, Tx: transmit, Rx: receive.
mA: milliamperes, dBm: decibels (milliwatts).

                                 Optical   Optical
           Temperature  Voltage  Tx Power  Rx Power
Port       (Celsius)    (Volts)  (dBm)     (dBm)
---------  -----------  -------  --------  --------
Te1/0/1      56.0       3.35      -3.2     -23.7   
Te1/0/2      54.0       3.28      -1.8      -1.7   


sw07#show int transceiver
If device is externally calibrated, only calibrated values are printed.
++ : high alarm, +  : high warning, -  : low warning, -- : low alarm.
NA or N/A: not applicable, Tx: transmit, Rx: receive.
mA: milliamperes, dBm: decibels (milliwatts).

                                 Optical   Optical
           Temperature  Voltage  Tx Power  Rx Power
Port       (Celsius)    (Volts)  (dBm)     (dBm)
---------  -----------  -------  --------  --------
Te1/0/1      56.0       3.35      -3.2     -40.0   
Te1/0/2      54.0       3.28      -1.8      -1.7   


sw07#exit
sw07#terminal length 0
sw07#show int
Vlan1 is up, line protocol is up 
  Hardware is EtherSVI, address is cc5a.5373.32c0 (bia cc5a.5373.32c0)
  Internet address is 192.168.50.20/24
  MTU 1500 bytes, BW 1000000 Kbit/sec, DLY 10 usec, 
     reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation ARPA, loopback not set
  Keepalive not supported 
  ARP type: ARPA, ARP Timeout 04:00:00
  Last input 00:00:00, output 00:00:00, output hang never
  Last clearing of "show interface" counters 1y27w
  Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
  Queueing strategy: fifo
  Output queue: 0/40 (size/max)
  5 minute input rate 3000 bits/sec, 3 packets/sec
  5 minute output rate 2000 bits/sec, 2 packets/sec
     106474051 packets input, 8224762706 bytes, 0 no buffer
     Received 0 broadcasts (0 IP multicasts)
     0 runts, 0 giants, 0 throttles 
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
     6034543 packets output, 1871504716 bytes, 0 underruns
     0 output errors, 0 interface resets
     0 unknown protocol drops
     0 output buffer failures, 0 output buffers swapped out
GigabitEthernet1/0/1 is up, line protocol is up (connected) 
  Hardware is Gigabit Ethernet, address is cc5a.5373.3281 (bia cc5a.5373.3281)
  Description: foobar
  MTU 1500 bytes, BW 1000000 Kbit/sec, DLY 10 usec, 
     reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation ARPA, loopback not set
  Keepalive set (10 sec)
  Full-duplex, 1000Mb/s, media type is 10/100/1000BaseTX
  input flow-control is off, output flow-control is unsupported 
  ARP type: ARPA, ARP Timeout 04:00:00
  Last input 1y27w, output 00:00:00, output hang never
  Last clearing of "show interface" counters 1y27w
  Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 9537
  Queueing strategy: fifo
  Output queue: 0/40 (size/max)
  5 minute input rate 21000 bits/sec, 21 packets/sec
  5 minute output rate 33000 bits/sec, 31 packets/sec
     1578260603 packets input, 223625734180 bytes, 0 no buffer
     Received 47888901 broadcasts (10932670 multicasts)
     0 runts, 1690 giants, 0 throttles 
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
     0 watchdog, 10932670 multicast, 0 pause input
     0 input packets with dribble condition detected
     2097422261 packets output, 330777884977 bytes, 0 underruns
     0 output errors, 0 collisions, 0 interface resets
     0 unknown protocol drops
     0 babbles, 0 late collision, 0 deferred
     0 lost carrier, 0 no carrier, 0 pause output
     0 output buffer failures, 0 output buffers swapped out
GigabitEthernet1/0/2 is down, line protocol is down (notconnect) 
  Hardware is Gigabit Ethernet, address is cc5a.5373.3282 (bia cc5a.5373.3282)
  Description: to Sw02
  MTU 1500 bytes, BW 1000000 Kbit/sec, DLY 10 usec, 
     reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation ARPA, loopback not set
  Keepalive set (10 sec)
  Auto-duplex, Auto-speed, media type is 10/100/1000BaseTX
  input flow-control is off, output flow-control is unsupported 
  ARP type: ARPA, ARP Timeout 04:00:00
  Last input 3w4d, output 3w4d, output hang never