view release on metacpan or  search on metacpan

t/bin-fetchware-run.t  view on Meta::CPAN

    # which will screw up the installation and upgrading of httpd below.
    for my $fetchware_package (glob catfile(fetchware_database_path(), '*')) {
        # Clean up $fetchware_package.
        if ($fetchware_package =~ /test-dist/) {
            ok((unlink $fetchware_package),
                'checked cmd_upgrade() clean up fetchware database path')
                if -e $fetchware_package
        }
    }


    # Create a $temp_dir for make_test_dist() to use. I need to do this, so that
    # both the old and new test dists can be in the same directory.
    my $upgrade_temp_dir = tempdir("fetchware-$$-XXXXXXXXXX",
        CLEANUP => 1, TMPDIR => 1);
    # However, not only do I have create the tempdir, but I must also chmod 755
    # this temporary directory to ensure read access if this test file is run as
    # root, and then drops its privs without the extra read perms this test will
    # fail, because the nobody user will not be able to access this directory's
    # 700 perms.
    chmod 0755, $upgrade_temp_dir or fail(<<EOF);
Failed to chmod(0755, [$upgrade_temp_dir])! This is probably a bug or something?
EOF

note("UPGRADETD[$upgrade_temp_dir]");

    my $old_test_dist_path = make_test_dist(file_name => 'test-dist',
        ver_num => '1.00', destination_directory => $upgrade_temp_dir);
    
    my $old_test_dist_path_md5 = md5sum_file($old_test_dist_path);

    # Delete all existing httpd fetchware packages in fetchware_database_path(),
    # which will screw up the installation and upgrading of httpd below.
    for my $fetchware_package (glob catfile(fetchware_database_path(), '*')) {
        # Delete *only* httpd.
        if ($fetchware_package =~ /test-dist/) {
            # Clean up $fetchware_package.
            ok((unlink $fetchware_package),
                'checked cmd_upgrade() clean up fetchware database path')
                if -e $fetchware_package;
        }
    }

note("INSTALLPATH[$old_test_dist_path]");

    # I obviously must install test-dist before I can test upgrading it :)
    my $fetchware_package_path = cmd_install($old_test_dist_path);
    # And then test if the install was successful.
    ok(grep /test-dist/, glob(catfile(fetchware_database_path(), '*')),
        'check cmd_install(Fetchware) success.');


    # Clear internal %CONFIG variable, because I have to parse a Fetchwarefile
    # twice, and it's only supported once.
    __clear_CONFIG();


    # Sleep for 2 seconds to ensure that the new version is a least a couple of
    # seconds newer than the original version. Perl is pretty fast, so it can
    # actually execute this whole friggin subtest in less than one second on my
    # decent desktop system.
    sleep 2;


    my $new_test_dist_path = make_test_dist(file_name => 'test-dist',
        ver_num => '1.01', destination_directory => $upgrade_temp_dir);

    my $new_test_dist_path_md5 = md5sum_file($new_test_dist_path);

    {
        local @ARGV = ('upgrade', 'test-dist');
        fork_ok(sub { run() },
            'Checked run() @ARGV upgrade success');
    }

    print_ok(sub {cmd_list()},
        sub {grep({$_ =~ /test-dist-1\.01/} (split "\n", $_[0]))},
        'check cmd_upgrade() success.');



    # Test for when cmd_upgrade() determines that the latest version is
    # installed.
    # Clear internal %CONFIG variable, because I have to pare a Fetchwarefile
    # twice, and it's only supported once.
    __clear_CONFIG();
    {
        local @ARGV = ('upgrade', 'test-dist');
        fork_ok(sub { run() },
            'Checked run() @ARGV upgrade version already installed');
    }

    # Clean up upgrade path.
    ok(unlink($old_test_dist_path, $old_test_dist_path_md5,
            $new_test_dist_path, $new_test_dist_path_md5),
        'checked cmd_upgrade() delete temp upgrade files');

    # Clean up installed and upgraded test-dist!
    ok(unlink(catfile(fetchware_database_path(), 'test-dist-1.01.fpkg')),
        'checked cmd_ugprade() delete useless test-dist from package database.');
};


subtest 'test run() upgrade-all' => sub {
    # Actually test during user install!!!

    # Create a $temp_dir for make_test_dist() to use. I need to do this, so that
    # both the old and new test dists can be in the same directory.
    my $upgrade_temp_dir = tempdir("fetchware-$$-XXXXXXXXXX",
        CLEANUP => 1, TMPDIR => 1);
    # However, not only do I hav to create the tempdir, but I must also chmod
    # 755 this temporary directory to ensuer read access if this test file is
    # run as root, and then drops its privs without the extra read perms this
    # test will fail, because the nobody user will not be able to access this
    # directory's 700 perms.
    chmod 0755, $upgrade_temp_dir or fail(<<EOF);
Failed to chmod(0755, [$upgrade_temp_dir])! This is probably a bug or something?
EOF

    my $old_test_dist_path = make_test_dist(file_name => 'test-dist',
        ver_num => '1.00', destination_directory => $upgrade_temp_dir);
    my $old_another_dist_path = make_test_dist(file_name => 'another-dist',
        ver_num => '1.00', destination_directory => $upgrade_temp_dir);

    my $old_test_dist_path_md5 = md5sum_file($old_test_dist_path);
    my $old_another_dist_path_md5 = md5sum_file($old_another_dist_path);


    # I obviously must install test-dist before I can test upgrading it :)
    for my $fpkg_to_install ($old_test_dist_path, $old_another_dist_path) {
        my $fetchware_package_path = cmd_install($fpkg_to_install);
        # And then test if the install was successful.
        ok(grep /test-dist|another-dist/,
            glob(catfile(fetchware_database_path(), '*')),
            'check cmd_install(Fetchware) success.');

        # Clear internal %CONFIG variable, because I have to parse a Fetchwarefile
        # twice, and it's only supported once.
        __clear_CONFIG();
    }


    # Sleep for 2 seconds to ensure that the new version is a least a couple of
    # seconds newer than the original version. Perl is pretty fast, so it can
    # actually execute this whole friggin subtest on my decent desktop system
    # in less thatn one second.
    sleep 2;


    # Create new test fpkgs and md5s in same dir for cmd_upgrade_all() to work.
    my $new_test_dist_path = make_test_dist(file_name => 'test-dist',
        ver_num => '1.01', destination_directory => $upgrade_temp_dir);
    my $new_another_dist_path = make_test_dist(file_name => 'another-dist',
        ver_num => '1.01', destination_directory => $upgrade_temp_dir);

    my $new_test_dist_path_md5 = md5sum_file($new_test_dist_path);
    my $new_another_dist_path_md5 = md5sum_file($new_another_dist_path);


    # Upgrade all installed fetchware packages.
    {
        local @ARGV = ('upgrade-all');
        fork_ok(sub { run() },
            'Checked run() @ARGV upgrade-all success. ');
    }

    print_ok(sub {cmd_list()},
        sub {grep({$_ =~ /(test|another)-dist-1\.01/} (split "\n", $_[0]))},
        'check cmd_upgrade_all() success.');


    # Test for when cmd_upgrade() determines that the latest version is
    # installed.
    # Clear internal %CONFIG variable, because I have to pare a Fetchwarefile
    # twice, and it's only supported once.
    __clear_CONFIG();
    is(cmd_upgrade_all(), 'No upgrade needed.',
        'checked cmd_upgrade() latest version already installed.');

    # Clean up upgrade path.
    ok(unlink($old_test_dist_path, $old_test_dist_path_md5,
        $old_another_dist_path, $old_another_dist_path_md5,
        $new_test_dist_path, $new_test_dist_path_md5,
        $new_another_dist_path, $new_another_dist_path_md5,
        ), 'checked cmd_upgrade() delete temp upgrade files');

    # Clean up installed and upgraded test-dist!
    ok(unlink(catfile(fetchware_database_path(), 'test-dist-1.01.fpkg')),
        'checked cmd_ugprade() delete useless test-dist from package database.');
    ok(unlink(catfile(fetchware_database_path(), 'another-dist-1.01.fpkg')),
        'checked cmd_ugprade() delete useless test-dist from package database.');

};


subtest 'test run() list' => sub {
    # First install a test package to make sure there is something for cmd_list()
    # to find.
    my $test_dist_path = make_test_dist(file_name => 'test-dist',
        ver_num => '1.00');
    my $test_dist_md5 = md5sum_file($test_dist_path);

    ok(cmd_install($test_dist_path),
        'checked cmd_list() by installing a test-dist to list');