Alien-SVN
view release on metacpan or search on metacpan
src/subversion/build/ltmain.sh view on Meta::CPAN
sed_dirname='s|/[^/]*$||'
sed_basename='s|^.*/||'
# Sed substitution that helps us do robust quoting. It backslashifies
# metacharacters that are still active within double-quoted strings.
sed_quote_subst='s|\([`"$\\]\)|\\\1|g'
# Same as above, but do not quote variable references.
sed_double_quote_subst='s/\(["`\\]\)/\\\1/g'
# Sed substitution that turns a string into a regex matching for the
# string literally.
sed_make_literal_regex='s|[].[^$\\*\/]|\\&|g'
# Sed substitution that converts a w32 file name or path
# that contains forward slashes, into one that contains
# (escaped) backslashes. A very naive implementation.
sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
# Re-'\' parameter expansions in output of sed_double_quote_subst that
# were '\'-ed in input to the same. If an odd number of '\' preceded a
# '$' in input to sed_double_quote_subst, that '$' was protected from
# expansion. Since each input '\' is now two '\'s, look for any number
# of runs of four '\'s followed by two '\'s and then a '$'. '\' that '$'.
_G_bs='\\'
_G_bs2='\\\\'
_G_bs4='\\\\\\\\'
_G_dollar='\$'
sed_double_backslash="\
s/$_G_bs4/&\\
/g
s/^$_G_bs2$_G_dollar/$_G_bs&/
s/\\([^$_G_bs]\\)$_G_bs2$_G_dollar/\\1$_G_bs2$_G_bs$_G_dollar/g
s/\n//g"
## ----------------- ##
## Global variables. ##
## ----------------- ##
# Except for the global variables explicitly listed below, the following
# functions in the '^func_' namespace, and the '^require_' namespace
# variables initialised in the 'Resource management' section, sourcing
# this file will not pollute your global namespace with anything
# else. There's no portable way to scope variables in Bourne shell
# though, so actually running these functions will sometimes place
# results into a variable named after the function, and often use
# temporary variables in the '^_G_' namespace. If you are careful to
# avoid using those namespaces casually in your sourcing script, things
# should continue to work as you expect. And, of course, you can freely
# overwrite any of the functions or variables defined here before
# calling anything to customize them.
EXIT_SUCCESS=0
EXIT_FAILURE=1
EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing.
EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake.
# Allow overriding, eg assuming that you follow the convention of
# putting '$debug_cmd' at the start of all your functions, you can get
# bash to show function call trace with:
#
# debug_cmd='eval echo "${FUNCNAME[0]} $*" >&2' bash your-script-name
debug_cmd=${debug_cmd-":"}
exit_cmd=:
# By convention, finish your script with:
#
# exit $exit_status
#
# so that you can set exit_status to non-zero if you want to indicate
# something went wrong during execution without actually bailing out at
# the point of failure.
exit_status=$EXIT_SUCCESS
# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
# is ksh but when the shell is invoked as "sh" and the current value of
# the _XPG environment variable is not equal to 1 (one), the special
# positional parameter $0, within a function call, is the name of the
# function.
progpath=$0
# The name of this program.
progname=`$ECHO "$progpath" |$SED "$sed_basename"`
# Make sure we have an absolute progpath for reexecution:
case $progpath in
[\\/]*|[A-Za-z]:\\*) ;;
*[\\/]*)
progdir=`$ECHO "$progpath" |$SED "$sed_dirname"`
progdir=`cd "$progdir" && pwd`
progpath=$progdir/$progname
;;
*)
_G_IFS=$IFS
IFS=${PATH_SEPARATOR-:}
for progdir in $PATH; do
IFS=$_G_IFS
test -x "$progdir/$progname" && break
done
IFS=$_G_IFS
test -n "$progdir" || progdir=`pwd`
progpath=$progdir/$progname
;;
esac
## ----------------- ##
## Standard options. ##
## ----------------- ##
# The following options affect the operation of the functions defined
# below, and should be set appropriately depending on run-time para-
# meters passed on the command line.
opt_dry_run=false
opt_quiet=false
opt_verbose=false
# Categories 'all' and 'none' are always available. Append any others
# you will pass as the first argument to func_warning from your own
# code.
warning_categories=
# By default, display warnings according to 'opt_warning_types'. Set
# 'warning_func' to ':' to elide all warnings, or func_fatal_error to
# treat the next displayed warning as a fatal error.
warning_func=func_warn_and_continue
# Set to 'all' to display all warnings, 'none' to suppress all
# warnings, or a space delimited list of some subset of
# 'warning_categories' to display only the listed warnings.
opt_warning_types=all
## -------------------- ##
## Resource management. ##
## -------------------- ##
# This section contains definitions for functions that each ensure a
# particular resource (a file, or a non-empty configuration variable for
# example) is available, and if appropriate to extract default values
# from pertinent package files. Call them using their associated
# 'require_*' variable to ensure that they are executed, at most, once.
#
# It's entirely deliberate that calling these functions can set
# variables that don't obey the namespace limitations obeyed by the rest
# of this file, in order that that they be as useful as possible to
# callers.
# require_term_colors
# -------------------
# Allow display of bold text on terminals that support it.
require_term_colors=func_require_term_colors
func_require_term_colors ()
{
$debug_cmd
test -t 1 && {
# COLORTERM and USE_ANSI_COLORS environment variables take
# precedence, because most terminfo databases neglect to describe
# whether color sequences are supported.
test -n "${COLORTERM+set}" && : ${USE_ANSI_COLORS="1"}
if test 1 = "$USE_ANSI_COLORS"; then
# Standard ANSI escape sequences
tc_reset='[0m'
tc_bold='[1m'; tc_standout='[7m'
tc_red='[31m'; tc_green='[32m'
tc_blue='[34m'; tc_cyan='[36m'
else
# Otherwise trust the terminfo database after all.
test -n "`tput sgr0 2>/dev/null`" && {
tc_reset=`tput sgr0`
test -n "`tput bold 2>/dev/null`" && tc_bold=`tput bold`
tc_standout=$tc_bold
test -n "`tput smso 2>/dev/null`" && tc_standout=`tput smso`
test -n "`tput setaf 1 2>/dev/null`" && tc_red=`tput setaf 1`
test -n "`tput setaf 2 2>/dev/null`" && tc_green=`tput setaf 2`
test -n "`tput setaf 4 2>/dev/null`" && tc_blue=`tput setaf 4`
test -n "`tput setaf 5 2>/dev/null`" && tc_cyan=`tput setaf 5`
}
fi
}
require_term_colors=:
}
## ----------------- ##
## Function library. ##
## ----------------- ##
# This section contains a variety of useful functions to call in your
# scripts. Take note of the portable wrappers for features provided by
# some modern shells, which will fall back to slower equivalents on
# less featureful shells.
# func_append VAR VALUE
# ---------------------
# Append VALUE onto the existing contents of VAR.
# We should try to minimise forks, especially on Windows where they are
# unreasonably slow, so skip the feature probes when bash or zsh are
# being used:
if test set = "${BASH_VERSION+set}${ZSH_VERSION+set}"; then
: ${_G_HAVE_ARITH_OP="yes"}
: ${_G_HAVE_XSI_OPS="yes"}
# The += operator was introduced in bash 3.1
case $BASH_VERSION in
[12].* | 3.0 | 3.0*) ;;
*)
: ${_G_HAVE_PLUSEQ_OP="yes"}
;;
esac
fi
# _G_HAVE_PLUSEQ_OP
# Can be empty, in which case the shell is probed, "yes" if += is
# useable or anything else if it does not work.
test -z "$_G_HAVE_PLUSEQ_OP" \
&& (eval 'x=a; x+=" b"; test "a b" = "$x"') 2>/dev/null \
&& _G_HAVE_PLUSEQ_OP=yes
if test yes = "$_G_HAVE_PLUSEQ_OP"
then
# This is an XSI compatible shell, allowing a faster implementation...
eval 'func_append ()
{
$debug_cmd
eval "$1+=\$2"
}'
else
# ...otherwise fall back to using expr, which is often a shell builtin.
func_append ()
{
$debug_cmd
eval "$1=\$$1\$2"
}
fi
# func_append_quoted VAR VALUE
# ----------------------------
# Quote VALUE and append to the end of shell variable VAR, separated
# by a space.
if test yes = "$_G_HAVE_PLUSEQ_OP"; then
eval 'func_append_quoted ()
{
$debug_cmd
func_quote_for_eval "$2"
eval "$1+=\\ \$func_quote_for_eval_result"
}'
else
func_append_quoted ()
{
$debug_cmd
func_quote_for_eval "$2"
eval "$1=\$$1\\ \$func_quote_for_eval_result"
}
fi
# func_append_uniq VAR VALUE
# --------------------------
# Append unique VALUE onto the existing contents of VAR, assuming
# entries are delimited by the first character of VALUE. For example:
#
# func_append_uniq options " --another-option option-argument"
#
# will only append to $options if " --another-option option-argument "
# is not already present somewhere in $options already (note spaces at
# each end implied by leading space in second argument).
func_append_uniq ()
{
$debug_cmd
eval _G_current_value='`$ECHO $'$1'`'
_G_delim=`expr "$2" : '\(.\)'`
case $_G_delim$_G_current_value$_G_delim in
*"$2$_G_delim"*) ;;
*) func_append "$@" ;;
esac
}
# func_arith TERM...
# ------------------
# Set func_arith_result to the result of evaluating TERMs.
test -z "$_G_HAVE_ARITH_OP" \
&& (eval 'test 2 = $(( 1 + 1 ))') 2>/dev/null \
&& _G_HAVE_ARITH_OP=yes
if test yes = "$_G_HAVE_ARITH_OP"; then
eval 'func_arith ()
{
$debug_cmd
func_arith_result=$(( $* ))
}'
else
func_arith ()
{
$debug_cmd
func_arith_result=`expr "$@"`
}
fi
# func_basename FILE
# ------------------
# Set func_basename_result to FILE with everything up to and including
# the last / stripped.
if test yes = "$_G_HAVE_XSI_OPS"; then
# If this shell supports suffix pattern removal, then use it to avoid
# forking. Hide the definitions single quotes in case the shell chokes
# on unsupported syntax...
_b='func_basename_result=${1##*/}'
_d='case $1 in
*/*) func_dirname_result=${1%/*}$2 ;;
* ) func_dirname_result=$3 ;;
esac'
else
# ...otherwise fall back to using sed.
_b='func_basename_result=`$ECHO "$1" |$SED "$sed_basename"`'
_d='func_dirname_result=`$ECHO "$1" |$SED "$sed_dirname"`
if test "X$func_dirname_result" = "X$1"; then
func_dirname_result=$3
else
func_append func_dirname_result "$2"
fi'
fi
eval 'func_basename ()
{
$debug_cmd
'"$_b"'
}'
# func_dirname FILE APPEND NONDIR_REPLACEMENT
# -------------------------------------------
# Compute the dirname of FILE. If nonempty, add APPEND to the result,
# otherwise set result to NONDIR_REPLACEMENT.
eval 'func_dirname ()
{
$debug_cmd
'"$_d"'
}'
# func_dirname_and_basename FILE APPEND NONDIR_REPLACEMENT
# --------------------------------------------------------
# Perform func_basename and func_dirname in a single function
# call:
# dirname: Compute the dirname of FILE. If nonempty,
# add APPEND to the result, otherwise set result
# to NONDIR_REPLACEMENT.
# value returned in "$func_dirname_result"
# basename: Compute filename of FILE.
# value retuned in "$func_basename_result"
# For efficiency, we do not delegate to the functions above but instead
# duplicate the functionality here.
eval 'func_dirname_and_basename ()
{
$debug_cmd
'"$_b"'
'"$_d"'
}'
# func_echo ARG...
# ----------------
# Echo program name prefixed message.
func_echo ()
{
$debug_cmd
_G_message=$*
func_echo_IFS=$IFS
IFS=$nl
for _G_line in $_G_message; do
IFS=$func_echo_IFS
$ECHO "$progname: $_G_line"
done
IFS=$func_echo_IFS
}
# func_echo_all ARG...
# --------------------
# Invoke $ECHO with all args, space-separated.
func_echo_all ()
{
$ECHO "$*"
}
# func_echo_infix_1 INFIX ARG...
# ------------------------------
# Echo program name, followed by INFIX on the first line, with any
# additional lines not showing INFIX.
func_echo_infix_1 ()
{
$debug_cmd
$require_term_colors
_G_infix=$1; shift
_G_indent=$_G_infix
_G_prefix="$progname: $_G_infix: "
_G_message=$*
# Strip color escape sequences before counting printable length
for _G_tc in "$tc_reset" "$tc_bold" "$tc_standout" "$tc_red" "$tc_green" "$tc_blue" "$tc_cyan"
do
test -n "$_G_tc" && {
_G_esc_tc=`$ECHO "$_G_tc" | $SED "$sed_make_literal_regex"`
_G_indent=`$ECHO "$_G_indent" | $SED "s|$_G_esc_tc||g"`
}
done
_G_indent="$progname: "`echo "$_G_indent" | $SED 's|.| |g'`" " ## exclude from sc_prohibit_nested_quotes
func_echo_infix_1_IFS=$IFS
IFS=$nl
for _G_line in $_G_message; do
IFS=$func_echo_infix_1_IFS
$ECHO "$_G_prefix$tc_bold$_G_line$tc_reset" >&2
_G_prefix=$_G_indent
done
IFS=$func_echo_infix_1_IFS
}
# func_error ARG...
# -----------------
# Echo program name prefixed message to standard error.
func_error ()
{
$debug_cmd
$require_term_colors
func_echo_infix_1 " $tc_standout${tc_red}error$tc_reset" "$*" >&2
}
# func_fatal_error ARG...
# -----------------------
# Echo program name prefixed message to standard error, and exit.
func_fatal_error ()
{
$debug_cmd
func_error "$*"
exit $EXIT_FAILURE
}
# func_grep EXPRESSION FILENAME
# -----------------------------
# Check whether EXPRESSION matches any line of FILENAME, without output.
func_grep ()
{
$debug_cmd
$GREP "$1" "$2" >/dev/null 2>&1
}
# func_len STRING
# ---------------
# Set func_len_result to the length of STRING. STRING may not
# start with a hyphen.
test -z "$_G_HAVE_XSI_OPS" \
&& (eval 'x=a/b/c;
test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \
&& _G_HAVE_XSI_OPS=yes
if test yes = "$_G_HAVE_XSI_OPS"; then
eval 'func_len ()
{
$debug_cmd
func_len_result=${#1}
}'
else
func_len ()
{
$debug_cmd
func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
}
fi
# func_mkdir_p DIRECTORY-PATH
# ---------------------------
# Make sure the entire path to DIRECTORY-PATH is available.
func_mkdir_p ()
{
$debug_cmd
_G_directory_path=$1
_G_dir_list=
if test -n "$_G_directory_path" && test : != "$opt_dry_run"; then
# Protect directory names starting with '-'
case $_G_directory_path in
-*) _G_directory_path=./$_G_directory_path ;;
esac
# While some portion of DIR does not yet exist...
while test ! -d "$_G_directory_path"; do
# ...make a list in topmost first order. Use a colon delimited
# list incase some portion of path contains whitespace.
_G_dir_list=$_G_directory_path:$_G_dir_list
# If the last portion added has no slash in it, the list is done
case $_G_directory_path in */*) ;; *) break ;; esac
# ...otherwise throw away the child directory and loop
_G_directory_path=`$ECHO "$_G_directory_path" | $SED -e "$sed_dirname"`
done
_G_dir_list=`$ECHO "$_G_dir_list" | $SED 's|:*$||'`
func_mkdir_p_IFS=$IFS; IFS=:
for _G_dir in $_G_dir_list; do
IFS=$func_mkdir_p_IFS
# mkdir can fail with a 'File exist' error if two processes
# try to create one of the directories concurrently. Don't
# stop in that case!
$MKDIR "$_G_dir" 2>/dev/null || :
done
IFS=$func_mkdir_p_IFS
# Bail out if we (or some other process) failed to create a directory.
test -d "$_G_directory_path" || \
func_fatal_error "Failed to create '$1'"
fi
}
# func_mktempdir [BASENAME]
# -------------------------
# Make a temporary directory that won't clash with other running
# libtool processes, and avoids race conditions if possible. If
# given, BASENAME is the basename for that directory.
func_mktempdir ()
{
$debug_cmd
_G_template=${TMPDIR-/tmp}/${1-$progname}
if test : = "$opt_dry_run"; then
# Return a directory name, but don't create it in dry-run mode
_G_tmpdir=$_G_template-$$
else
# If mktemp works, use that first and foremost
_G_tmpdir=`mktemp -d "$_G_template-XXXXXXXX" 2>/dev/null`
if test ! -d "$_G_tmpdir"; then
# Failing that, at least try and use $RANDOM to avoid a race
_G_tmpdir=$_G_template-${RANDOM-0}$$
func_mktempdir_umask=`umask`
umask 0077
$MKDIR "$_G_tmpdir"
umask $func_mktempdir_umask
fi
# If we're not in dry-run mode, bomb out on failure
test -d "$_G_tmpdir" || \
func_fatal_error "cannot create temporary directory '$_G_tmpdir'"
fi
$ECHO "$_G_tmpdir"
}
# func_normal_abspath PATH
# ------------------------
# Remove doubled-up and trailing slashes, "." path components,
# and cancel out any ".." path components in PATH after making
# it an absolute path.
func_normal_abspath ()
{
$debug_cmd
# These SED scripts presuppose an absolute path with a trailing slash.
_G_pathcar='s|^/\([^/]*\).*$|\1|'
_G_pathcdr='s|^/[^/]*||'
_G_removedotparts=':dotsl
s|/\./|/|g
t dotsl
s|/\.$|/|'
_G_collapseslashes='s|/\{1,\}|/|g'
_G_finalslash='s|/*$|/|'
# Start from root dir and reassemble the path.
func_normal_abspath_result=
func_normal_abspath_tpath=$1
func_normal_abspath_altnamespace=
case $func_normal_abspath_tpath in
"")
# Empty path, that just means $cwd.
func_stripname '' '/' "`pwd`"
func_normal_abspath_result=$func_stripname_result
return
;;
# The next three entries are used to spot a run of precisely
# two leading slashes without using negated character classes;
# we take advantage of case's first-match behaviour.
///*)
# Unusual form of absolute path, do nothing.
;;
//*)
# Not necessarily an ordinary path; POSIX reserves leading '//'
# and for example Cygwin uses it to access remote file shares
# over CIFS/SMB, so we conserve a leading double slash if found.
func_normal_abspath_altnamespace=/
;;
/*)
# Absolute path, do nothing.
;;
*)
# Relative path, prepend $cwd.
func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
;;
esac
# Cancel out all the simple stuff to save iterations. We also want
# the path to end with a slash for ease of parsing, so make sure
# there is one (and only one) here.
func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
-e "$_G_removedotparts" -e "$_G_collapseslashes" -e "$_G_finalslash"`
while :; do
# Processed it all yet?
if test / = "$func_normal_abspath_tpath"; then
# If we ascended to the root using ".." the result may be empty now.
if test -z "$func_normal_abspath_result"; then
func_normal_abspath_result=/
fi
break
fi
func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
-e "$_G_pathcar"`
func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
-e "$_G_pathcdr"`
# Figure out what to do with it
case $func_normal_abspath_tcomponent in
"")
# Trailing empty path component, ignore it.
;;
..)
# Parent dir; strip last assembled component from result.
func_dirname "$func_normal_abspath_result"
func_normal_abspath_result=$func_dirname_result
;;
*)
# Actual path component, append it.
func_append func_normal_abspath_result "/$func_normal_abspath_tcomponent"
;;
esac
done
# Restore leading double-slash if one was found on entry.
func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
}
# func_notquiet ARG...
# --------------------
# Echo program name prefixed message only when not in quiet mode.
func_notquiet ()
{
$debug_cmd
$opt_quiet || func_echo ${1+"$@"}
# A bug in bash halts the script if the last line of a function
# fails when set -e is in force, so we need another command to
# work around that:
:
}
# func_relative_path SRCDIR DSTDIR
# --------------------------------
# Set func_relative_path_result to the relative path from SRCDIR to DSTDIR.
func_relative_path ()
{
$debug_cmd
func_relative_path_result=
func_normal_abspath "$1"
func_relative_path_tlibdir=$func_normal_abspath_result
func_normal_abspath "$2"
func_relative_path_tbindir=$func_normal_abspath_result
# Ascend the tree starting from libdir
while :; do
# check if we have found a prefix of bindir
case $func_relative_path_tbindir in
$func_relative_path_tlibdir)
# found an exact match
func_relative_path_tcancelled=
break
;;
$func_relative_path_tlibdir*)
# found a matching prefix
func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
func_relative_path_tcancelled=$func_stripname_result
if test -z "$func_relative_path_result"; then
func_relative_path_result=.
fi
break
;;
*)
func_dirname $func_relative_path_tlibdir
func_relative_path_tlibdir=$func_dirname_result
if test -z "$func_relative_path_tlibdir"; then
# Have to descend all the way to the root!
func_relative_path_result=../$func_relative_path_result
func_relative_path_tcancelled=$func_relative_path_tbindir
break
fi
func_relative_path_result=../$func_relative_path_result
;;
esac
done
# Now calculate path; take care to avoid doubling-up slashes.
func_stripname '' '/' "$func_relative_path_result"
func_relative_path_result=$func_stripname_result
func_stripname '/' '/' "$func_relative_path_tcancelled"
if test -n "$func_stripname_result"; then
func_append func_relative_path_result "/$func_stripname_result"
fi
# Normalisation. If bindir is libdir, return '.' else relative path.
if test -n "$func_relative_path_result"; then
func_stripname './' '' "$func_relative_path_result"
func_relative_path_result=$func_stripname_result
fi
test -n "$func_relative_path_result" || func_relative_path_result=.
:
}
# func_quote_for_eval ARG...
# --------------------------
# Aesthetically quote ARGs to be evaled later.
# This function returns two values:
# i) func_quote_for_eval_result
# double-quoted, suitable for a subsequent eval
# ii) func_quote_for_eval_unquoted_result
# has all characters that are still active within double
# quotes backslashified.
func_quote_for_eval ()
{
$debug_cmd
func_quote_for_eval_unquoted_result=
func_quote_for_eval_result=
while test 0 -lt $#; do
case $1 in
*[\\\`\"\$]*)
_G_unquoted_arg=`printf '%s\n' "$1" |$SED "$sed_quote_subst"` ;;
*)
_G_unquoted_arg=$1 ;;
esac
if test -n "$func_quote_for_eval_unquoted_result"; then
func_append func_quote_for_eval_unquoted_result " $_G_unquoted_arg"
else
func_append func_quote_for_eval_unquoted_result "$_G_unquoted_arg"
fi
case $_G_unquoted_arg in
# Double-quote args containing shell metacharacters to delay
# word splitting, command substitution and variable expansion
# for a subsequent eval.
# Many Bourne shells cannot handle close brackets correctly
# in scan sets, so we specify it separately.
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
_G_quoted_arg=\"$_G_unquoted_arg\"
;;
*)
_G_quoted_arg=$_G_unquoted_arg
;;
esac
if test -n "$func_quote_for_eval_result"; then
func_append func_quote_for_eval_result " $_G_quoted_arg"
else
func_append func_quote_for_eval_result "$_G_quoted_arg"
fi
shift
done
}
# func_quote_for_expand ARG
# -------------------------
# Aesthetically quote ARG to be evaled later; same as above,
# but do not quote variable references.
func_quote_for_expand ()
{
$debug_cmd
case $1 in
*[\\\`\"]*)
_G_arg=`$ECHO "$1" | $SED \
-e "$sed_double_quote_subst" -e "$sed_double_backslash"` ;;
*)
_G_arg=$1 ;;
esac
case $_G_arg in
# Double-quote args containing shell metacharacters to delay
# word splitting and command substitution for a subsequent eval.
# Many Bourne shells cannot handle close brackets correctly
# in scan sets, so we specify it separately.
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
_G_arg=\"$_G_arg\"
;;
esac
func_quote_for_expand_result=$_G_arg
}
# func_stripname PREFIX SUFFIX NAME
# ---------------------------------
# strip PREFIX and SUFFIX from NAME, and store in func_stripname_result.
# PREFIX and SUFFIX must not contain globbing or regex special
# characters, hashes, percent signs, but SUFFIX may contain a leading
# dot (in which case that matches only a dot).
if test yes = "$_G_HAVE_XSI_OPS"; then
eval 'func_stripname ()
{
$debug_cmd
# pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
# positional parameters, so assign one to ordinary variable first.
func_stripname_result=$3
func_stripname_result=${func_stripname_result#"$1"}
func_stripname_result=${func_stripname_result%"$2"}
}'
else
func_stripname ()
{
$debug_cmd
case $2 in
.*) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%\\\\$2\$%%"`;;
*) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%$2\$%%"`;;
esac
}
fi
# func_show_eval CMD [FAIL_EXP]
# -----------------------------
# Unless opt_quiet is true, then output CMD. Then, if opt_dryrun is
# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
# is given, then evaluate it.
func_show_eval ()
{
$debug_cmd
_G_cmd=$1
_G_fail_exp=${2-':'}
func_quote_for_expand "$_G_cmd"
eval "func_notquiet $func_quote_for_expand_result"
$opt_dry_run || {
eval "$_G_cmd"
_G_status=$?
if test 0 -ne "$_G_status"; then
eval "(exit $_G_status); $_G_fail_exp"
fi
}
}
# func_show_eval_locale CMD [FAIL_EXP]
# ------------------------------------
# Unless opt_quiet is true, then output CMD. Then, if opt_dryrun is
# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
# is given, then evaluate it. Use the saved locale for evaluation.
func_show_eval_locale ()
{
$debug_cmd
_G_cmd=$1
_G_fail_exp=${2-':'}
$opt_quiet || {
func_quote_for_expand "$_G_cmd"
eval "func_echo $func_quote_for_expand_result"
}
$opt_dry_run || {
eval "$_G_user_locale
$_G_cmd"
_G_status=$?
eval "$_G_safe_locale"
if test 0 -ne "$_G_status"; then
eval "(exit $_G_status); $_G_fail_exp"
fi
}
}
# func_tr_sh
# ----------
# Turn $1 into a string suitable for a shell variable name.
# Result is stored in $func_tr_sh_result. All characters
# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
# if $1 begins with a digit, a '_' is prepended as well.
func_tr_sh ()
{
$debug_cmd
case $1 in
[0-9]* | *[!a-zA-Z0-9_]*)
func_tr_sh_result=`$ECHO "$1" | $SED -e 's/^\([0-9]\)/_\1/' -e 's/[^a-zA-Z0-9_]/_/g'`
;;
* )
func_tr_sh_result=$1
;;
esac
}
# func_verbose ARG...
# -------------------
# Echo program name prefixed message in verbose mode only.
func_verbose ()
{
$debug_cmd
$opt_verbose && func_echo "$*"
:
}
# func_warn_and_continue ARG...
# -----------------------------
# Echo program name prefixed warning message to standard error.
func_warn_and_continue ()
{
$debug_cmd
$require_term_colors
func_echo_infix_1 "${tc_red}warning$tc_reset" "$*" >&2
}
# func_warning CATEGORY ARG...
# ----------------------------
# Echo program name prefixed warning message to standard error. Warning
# messages can be filtered according to CATEGORY, where this function
# elides messages where CATEGORY is not listed in the global variable
# 'opt_warning_types'.
func_warning ()
{
$debug_cmd
# CATEGORY must be in the warning_categories list!
case " $warning_categories " in
*" $1 "*) ;;
*) func_internal_error "invalid warning category '$1'" ;;
esac
_G_category=$1
shift
case " $opt_warning_types " in
*" $_G_category "*) $warning_func ${1+"$@"} ;;
esac
}
# func_sort_ver VER1 VER2
# -----------------------
# 'sort -V' is not generally available.
# Note this deviates from the version comparison in automake
# in that it treats 1.5 < 1.5.0, and treats 1.4.4a < 1.4-p3a
# but this should suffice as we won't be specifying old
# version formats or redundant trailing .0 in bootstrap.conf.
# If we did want full compatibility then we should probably
# use m4_version_compare from autoconf.
func_sort_ver ()
{
$debug_cmd
printf '%s\n%s\n' "$1" "$2" \
| sort -t. -k 1,1n -k 2,2n -k 3,3n -k 4,4n -k 5,5n -k 6,6n -k 7,7n -k 8,8n -k 9,9n
}
# func_lt_ver PREV CURR
# ---------------------
# Return true if PREV and CURR are in the correct order according to
# func_sort_ver, otherwise false. Use it like this:
#
# func_lt_ver "$prev_ver" "$proposed_ver" || func_fatal_error "..."
func_lt_ver ()
{
$debug_cmd
test "x$1" = x`func_sort_ver "$1" "$2" | $SED 1q`
}
# Local variables:
# mode: shell-script
# sh-indentation: 2
# eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC"
# time-stamp-time-zone: "UTC"
# End:
#! /bin/sh
# Set a version string for this script.
scriptversion=2014-01-07.03; # UTC
# A portable, pluggable option parser for Bourne shell.
# Written by Gary V. Vaughan, 2010
# Copyright (C) 2010-2014 Free Software Foundation, Inc.
# This is free software; see the source for copying conditions. There is NO
# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# Please report bugs or propose patches to gary@gnu.org.
## ------ ##
## Usage. ##
## ------ ##
# This file is a library for parsing options in your shell scripts along
# with assorted other useful supporting features that you can make use
# of too.
#
# For the simplest scripts you might need only:
#
# #!/bin/sh
# . relative/path/to/funclib.sh
# . relative/path/to/options-parser
# scriptversion=1.0
# func_options ${1+"$@"}
# eval set dummy "$func_options_result"; shift
# ...rest of your script...
#
# In order for the '--version' option to work, you will need to have a
# suitably formatted comment like the one at the top of this file
# starting with '# Written by ' and ending with '# warranty; '.
#
# For '-h' and '--help' to work, you will also need a one line
# description of your script's purpose in a comment directly above the
# '# Written by ' line, like the one at the top of this file.
#
# The default options also support '--debug', which will turn on shell
# execution tracing (see the comment above debug_cmd below for another
# use), and '--verbose' and the func_verbose function to allow your script
# to display verbose messages only when your user has specified
# '--verbose'.
#
# After sourcing this file, you can plug processing for additional
# options by amending the variables from the 'Configuration' section
# below, and following the instructions in the 'Option parsing'
# section further down.
## -------------- ##
## Configuration. ##
## -------------- ##
# You should override these variables in your script after sourcing this
# file so that they reflect the customisations you have added to the
# option parser.
# The usage line for option parsing errors and the start of '-h' and
# '--help' output messages. You can embed shell variables for delayed
# expansion at the time the message is displayed, but you will need to
# quote other shell meta-characters carefully to prevent them being
# expanded when the contents are evaled.
usage='$progpath [OPTION]...'
# Short help message in response to '-h' and '--help'. Add to this or
# override it after sourcing this library to reflect the full set of
# options your script accepts.
usage_message="\
--debug enable verbose shell tracing
-W, --warnings=CATEGORY
report the warnings falling in CATEGORY [all]
-v, --verbose verbosely report processing
--version print version information and exit
-h, --help print short or long help message and exit
"
# Additional text appended to 'usage_message' in response to '--help'.
long_help_message="
Warning categories include:
'all' show all warnings
'none' turn off all the warnings
'error' warnings are treated as fatal errors"
# Help message printed before fatal option parsing errors.
fatal_help="Try '\$progname --help' for more information."
## ------------------------- ##
## Hook function management. ##
## ------------------------- ##
# This section contains functions for adding, removing, and running hooks
# to the main code. A hook is just a named list of of function, that can
# be run in order later on.
# func_hookable FUNC_NAME
# -----------------------
# Declare that FUNC_NAME will run hooks added with
# 'func_add_hook FUNC_NAME ...'.
func_hookable ()
{
$debug_cmd
func_append hookable_fns " $1"
}
# func_add_hook FUNC_NAME HOOK_FUNC
# ---------------------------------
# Request that FUNC_NAME call HOOK_FUNC before it returns. FUNC_NAME must
# first have been declared "hookable" by a call to 'func_hookable'.
func_add_hook ()
{
$debug_cmd
case " $hookable_fns " in
*" $1 "*) ;;
*) func_fatal_error "'$1' does not accept hook functions." ;;
esac
eval func_append ${1}_hooks '" $2"'
}
# func_remove_hook FUNC_NAME HOOK_FUNC
# ------------------------------------
# Remove HOOK_FUNC from the list of functions called by FUNC_NAME.
func_remove_hook ()
{
$debug_cmd
eval ${1}_hooks='`$ECHO "\$'$1'_hooks" |$SED "s| '$2'||"`'
}
# func_run_hooks FUNC_NAME [ARG]...
# ---------------------------------
# Run all hook functions registered to FUNC_NAME.
# It is assumed that the list of hook functions contains nothing more
# than a whitespace-delimited list of legal shell function names, and
# no effort is wasted trying to catch shell meta-characters or preserve
# whitespace.
func_run_hooks ()
{
$debug_cmd
case " $hookable_fns " in
*" $1 "*) ;;
*) func_fatal_error "'$1' does not support hook funcions.n" ;;
esac
eval _G_hook_fns=\$$1_hooks; shift
for _G_hook in $_G_hook_fns; do
eval $_G_hook '"$@"'
# store returned options list back into positional
# parameters for next 'cmd' execution.
eval _G_hook_result=\$${_G_hook}_result
eval set dummy "$_G_hook_result"; shift
done
func_quote_for_eval ${1+"$@"}
func_run_hooks_result=$func_quote_for_eval_result
}
## --------------- ##
## Option parsing. ##
## --------------- ##
# In order to add your own option parsing hooks, you must accept the
# full positional parameter list in your hook function, remove any
# options that you action, and then pass back the remaining unprocessed
# options in '<hooked_function_name>_result', escaped suitably for
# 'eval'. Like this:
#
# my_options_prep ()
# {
# $debug_cmd
#
# # Extend the existing usage message.
# usage_message=$usage_message'
# -s, --silent don'\''t print informational messages
# '
#
# func_quote_for_eval ${1+"$@"}
# my_options_prep_result=$func_quote_for_eval_result
# }
# func_add_hook func_options_prep my_options_prep
#
#
# my_silent_option ()
# {
# $debug_cmd
#
# # Note that for efficiency, we parse as many options as we can
# # recognise in a loop before passing the remainder back to the
# # caller on the first unrecognised argument we encounter.
# while test $# -gt 0; do
# opt=$1; shift
# case $opt in
# --silent|-s) opt_silent=: ;;
# # Separate non-argument short options:
# -s*) func_split_short_opt "$_G_opt"
# set dummy "$func_split_short_opt_name" \
# "-$func_split_short_opt_arg" ${1+"$@"}
# shift
# ;;
# *) set dummy "$_G_opt" "$*"; shift; break ;;
# esac
# done
#
# func_quote_for_eval ${1+"$@"}
# my_silent_option_result=$func_quote_for_eval_result
# }
# func_add_hook func_parse_options my_silent_option
#
#
# my_option_validation ()
# {
# $debug_cmd
#
# $opt_silent && $opt_verbose && func_fatal_help "\
# '--silent' and '--verbose' options are mutually exclusive."
#
# func_quote_for_eval ${1+"$@"}
# my_option_validation_result=$func_quote_for_eval_result
# }
# func_add_hook func_validate_options my_option_validation
#
# You'll alse need to manually amend $usage_message to reflect the extra
# options you parse. It's preferable to append if you can, so that
# multiple option parsing hooks can be added safely.
# func_options [ARG]...
# ---------------------
# All the functions called inside func_options are hookable. See the
# individual implementations for details.
func_hookable func_options
func_options ()
{
$debug_cmd
func_options_prep ${1+"$@"}
eval func_parse_options \
${func_options_prep_result+"$func_options_prep_result"}
eval func_validate_options \
${func_parse_options_result+"$func_parse_options_result"}
eval func_run_hooks func_options \
${func_validate_options_result+"$func_validate_options_result"}
# save modified positional parameters for caller
func_options_result=$func_run_hooks_result
}
# func_options_prep [ARG]...
# --------------------------
# All initialisations required before starting the option parse loop.
# Note that when calling hook functions, we pass through the list of
# positional parameters. If a hook function modifies that list, and
# needs to propogate that back to rest of this script, then the complete
# modified list must be put in 'func_run_hooks_result' before
# returning.
func_hookable func_options_prep
func_options_prep ()
{
$debug_cmd
# Option defaults:
opt_verbose=false
opt_warning_types=
func_run_hooks func_options_prep ${1+"$@"}
# save modified positional parameters for caller
func_options_prep_result=$func_run_hooks_result
}
# func_parse_options [ARG]...
# ---------------------------
# The main option parsing loop.
func_hookable func_parse_options
func_parse_options ()
{
$debug_cmd
func_parse_options_result=
# this just eases exit handling
while test $# -gt 0; do
# Defer to hook functions for initial option parsing, so they
# get priority in the event of reusing an option name.
func_run_hooks func_parse_options ${1+"$@"}
# Adjust func_parse_options positional parameters to match
eval set dummy "$func_run_hooks_result"; shift
# Break out of the loop if we already parsed every option.
test $# -gt 0 || break
_G_opt=$1
shift
case $_G_opt in
--debug|-x) debug_cmd='set -x'
func_echo "enabling shell trace mode"
$debug_cmd
;;
--no-warnings|--no-warning|--no-warn)
set dummy --warnings none ${1+"$@"}
shift
;;
--warnings|--warning|-W)
test $# = 0 && func_missing_arg $_G_opt && break
case " $warning_categories $1" in
*" $1 "*)
# trailing space prevents matching last $1 above
func_append_uniq opt_warning_types " $1"
;;
*all)
opt_warning_types=$warning_categories
;;
*none)
opt_warning_types=none
warning_func=:
;;
*error)
opt_warning_types=$warning_categories
warning_func=func_fatal_error
;;
*)
func_fatal_error \
"unsupported warning category: '$1'"
;;
esac
shift
;;
--verbose|-v) opt_verbose=: ;;
--version) func_version ;;
-\?|-h) func_usage ;;
--help) func_help ;;
# Separate optargs to long options (plugins may need this):
--*=*) func_split_equals "$_G_opt"
set dummy "$func_split_equals_lhs" \
"$func_split_equals_rhs" ${1+"$@"}
shift
;;
# Separate optargs to short options:
-W*)
func_split_short_opt "$_G_opt"
set dummy "$func_split_short_opt_name" \
"$func_split_short_opt_arg" ${1+"$@"}
shift
;;
# Separate non-argument short options:
-\?*|-h*|-v*|-x*)
func_split_short_opt "$_G_opt"
set dummy "$func_split_short_opt_name" \
"-$func_split_short_opt_arg" ${1+"$@"}
shift
;;
--) break ;;
-*) func_fatal_help "unrecognised option: '$_G_opt'" ;;
*) set dummy "$_G_opt" ${1+"$@"}; shift; break ;;
esac
done
# save modified positional parameters for caller
func_quote_for_eval ${1+"$@"}
func_parse_options_result=$func_quote_for_eval_result
}
# func_validate_options [ARG]...
# ------------------------------
# Perform any sanity checks on option settings and/or unconsumed
# arguments.
func_hookable func_validate_options
func_validate_options ()
{
$debug_cmd
# Display all warnings if -W was not given.
test -n "$opt_warning_types" || opt_warning_types=" $warning_categories"
func_run_hooks func_validate_options ${1+"$@"}
# Bail if the options were screwed!
$exit_cmd $EXIT_FAILURE
# save modified positional parameters for caller
func_validate_options_result=$func_run_hooks_result
}
## ----------------- ##
## Helper functions. ##
## ----------------- ##
# This section contains the helper functions used by the rest of the
# hookable option parser framework in ascii-betical order.
# func_fatal_help ARG...
# ----------------------
# Echo program name prefixed message to standard error, followed by
# a help hint, and exit.
func_fatal_help ()
{
$debug_cmd
eval \$ECHO \""Usage: $usage"\"
eval \$ECHO \""$fatal_help"\"
func_error ${1+"$@"}
exit $EXIT_FAILURE
}
# func_help
# ---------
# Echo long help message to standard output and exit.
func_help ()
{
$debug_cmd
func_usage_message
$ECHO "$long_help_message"
exit 0
}
# func_missing_arg ARGNAME
# ------------------------
# Echo program name prefixed message to standard error and set global
# exit_cmd.
func_missing_arg ()
{
$debug_cmd
func_error "Missing argument for '$1'."
exit_cmd=exit
}
# func_split_equals STRING
# ------------------------
# Set func_split_equals_lhs and func_split_equals_rhs shell variables after
# splitting STRING at the '=' sign.
test -z "$_G_HAVE_XSI_OPS" \
&& (eval 'x=a/b/c;
test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \
&& _G_HAVE_XSI_OPS=yes
if test yes = "$_G_HAVE_XSI_OPS"
then
# This is an XSI compatible shell, allowing a faster implementation...
eval 'func_split_equals ()
{
$debug_cmd
func_split_equals_lhs=${1%%=*}
func_split_equals_rhs=${1#*=}
test "x$func_split_equals_lhs" = "x$1" \
&& func_split_equals_rhs=
}'
else
# ...otherwise fall back to using expr, which is often a shell builtin.
func_split_equals ()
{
$debug_cmd
func_split_equals_lhs=`expr "x$1" : 'x\([^=]*\)'`
func_split_equals_rhs=
test "x$func_split_equals_lhs" = "x$1" \
|| func_split_equals_rhs=`expr "x$1" : 'x[^=]*=\(.*\)$'`
}
fi #func_split_equals
# func_split_short_opt SHORTOPT
# -----------------------------
# Set func_split_short_opt_name and func_split_short_opt_arg shell
# variables after splitting SHORTOPT after the 2nd character.
if test yes = "$_G_HAVE_XSI_OPS"
then
# This is an XSI compatible shell, allowing a faster implementation...
eval 'func_split_short_opt ()
{
$debug_cmd
func_split_short_opt_arg=${1#??}
func_split_short_opt_name=${1%"$func_split_short_opt_arg"}
}'
else
# ...otherwise fall back to using expr, which is often a shell builtin.
func_split_short_opt ()
{
$debug_cmd
func_split_short_opt_name=`expr "x$1" : 'x-\(.\)'`
func_split_short_opt_arg=`expr "x$1" : 'x-.\(.*\)$'`
}
fi #func_split_short_opt
# func_usage
# ----------
# Echo short help message to standard output and exit.
func_usage ()
{
$debug_cmd
func_usage_message
$ECHO "Run '$progname --help |${PAGER-more}' for full usage"
exit 0
}
# func_usage_message
# ------------------
# Echo short help message to standard output.
func_usage_message ()
{
$debug_cmd
eval \$ECHO \""Usage: $usage"\"
echo
$SED -n 's|^# ||
/^Written by/{
x;p;x
}
h
/^Written by/q' < "$progpath"
echo
eval \$ECHO \""$usage_message"\"
}
# func_version
# ------------
# Echo version message to standard output and exit.
func_version ()
{
$debug_cmd
printf '%s\n' "$progname $scriptversion"
$SED -n '
/(C)/!b go
:more
/\./!{
N
s|\n# | |
b more
}
:go
/^# Written by /,/# warranty; / {
s|^# ||
s|^# *$||
s|\((C)\)[ 0-9,-]*[ ,-]\([1-9][0-9]* \)|\1 \2|
p
}
/^# Written by / {
s|^# ||
p
}
/^warranty; /q' < "$progpath"
exit $?
}
# Local variables:
# mode: shell-script
# sh-indentation: 2
# eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC"
# time-stamp-time-zone: "UTC"
# End:
# Set a version string.
scriptversion='(GNU libtool) 2.4.3'
# func_echo ARG...
# ----------------
# Libtool also displays the current mode in messages, so override
# funclib.sh func_echo with this custom definition.
func_echo ()
{
$debug_cmd
_G_message=$*
func_echo_IFS=$IFS
IFS=$nl
for _G_line in $_G_message; do
IFS=$func_echo_IFS
$ECHO "$progname${opt_mode+: $opt_mode}: $_G_line"
done
IFS=$func_echo_IFS
}
# func_warning ARG...
# -------------------
# Libtool warnings are not categorized, so override funclib.sh
# func_warning with this simpler definition.
func_warning ()
{
$debug_cmd
$warning_func ${1+"$@"}
}
## ---------------- ##
## Options parsing. ##
## ---------------- ##
# Hook in the functions to make sure our own options are parsed during
# the option parsing loop.
usage='$progpath [OPTION]... [MODE-ARG]...'
# Short help message in response to '-h'.
usage_message="Options:
--config show all configuration variables
--debug enable verbose shell tracing
-n, --dry-run display commands without modifying any files
--features display basic configuration information and exit
--mode=MODE use operation mode MODE
--no-warnings equivalent to '-Wnone'
--preserve-dup-deps don't remove duplicate dependency libraries
--quiet, --silent don't print informational messages
--tag=TAG use configuration variables from tag TAG
-v, --verbose print more informational messages than default
--version print version information
-W, --warnings=CATEGORY report the warnings falling in CATEGORY [all]
-h, --help, --help-all print short, long, or detailed help message
"
# Additional text appended to 'usage_message' in response to '--help'.
long_help_message=$long_help_message"
MODE must be one of the following:
clean remove files from the build directory
compile compile a source file into a libtool object
execute automatically set library path, then run a program
finish complete the installation of libtool libraries
install install libraries or executables
link create a library or an executable
uninstall remove libraries from an installed directory
MODE-ARGS vary depending on the MODE. When passed as first option,
'--mode=MODE' may be abbreviated as 'MODE' or a unique abbreviation of that.
Try '$progname --help --mode=MODE' for a more detailed description of MODE.
When reporting a bug, please describe a test case to reproduce it and
include the following information:
host-triplet: $host
shell: $SHELL
compiler: $LTCC
compiler flags: $LTCFLAGS
linker: $LD (gnu? $with_gnu_ld)
version: $progname (GNU libtool) 2.4.3
automake: `($AUTOMAKE --version) 2>/dev/null |$SED 1q`
autoconf: `($AUTOCONF --version) 2>/dev/null |$SED 1q`
Report bugs to <bug-libtool@gnu.org>.
GNU libtool home page: <http://www.gnu.org/software/libtool/>.
General help using GNU software: <http://www.gnu.org/gethelp/>."
# func_lo2o OBJECT-NAME
# ---------------------
# Transform OBJECT-NAME from a '.lo' suffix to the platform specific
# object suffix.
lo2o=s/\\.lo\$/.$objext/
o2lo=s/\\.$objext\$/.lo/
if test yes = "$_G_HAVE_XSI_OPS"; then
eval 'func_lo2o ()
{
case $1 in
*.lo) func_lo2o_result=${1%.lo}.$objext ;;
src/subversion/build/ltmain.sh view on Meta::CPAN
*)
if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
taglist="$taglist $tagname"
# Evaluate the configuration. Be careful to quote the path
# and the sed script, to avoid splitting on whitespace, but
# also don't use non-portable quotes within backquotes within
# quotes we have to do it in 2 steps:
extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
eval "$extractedcf"
else
func_error "ignoring unknown tag $tagname"
fi
;;
esac
}
# func_check_version_match
# ------------------------
# Ensure that we are using m4 macros, and libtool script from the same
# release of libtool.
func_check_version_match ()
{
if test "$package_revision" != "$macro_revision"; then
if test "$VERSION" != "$macro_version"; then
if test -z "$macro_version"; then
cat >&2 <<_LT_EOF
$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
$progname: definition of this LT_INIT comes from an older release.
$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
$progname: and run autoconf again.
_LT_EOF
else
cat >&2 <<_LT_EOF
$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
$progname: and run autoconf again.
_LT_EOF
fi
else
cat >&2 <<_LT_EOF
$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision,
$progname: but the definition of this LT_INIT comes from revision $macro_revision.
$progname: You should recreate aclocal.m4 with macros from revision $package_revision
$progname: of $PACKAGE $VERSION and run autoconf again.
_LT_EOF
fi
exit $EXIT_MISMATCH
fi
}
# libtool_options_prep [ARG]...
# -----------------------------
# Preparation for options parsed by libtool.
libtool_options_prep ()
{
$debug_mode
# Option defaults:
opt_config=false
opt_dlopen=
opt_dry_run=false
opt_help=false
opt_mode=
opt_preserve_dup_deps=false
opt_quiet=false
nonopt=
preserve_args=
# Shorthand for --mode=foo, only valid as the first argument
case $1 in
clean|clea|cle|cl)
shift; set dummy --mode clean ${1+"$@"}; shift
;;
compile|compil|compi|comp|com|co|c)
shift; set dummy --mode compile ${1+"$@"}; shift
;;
execute|execut|execu|exec|exe|ex|e)
shift; set dummy --mode execute ${1+"$@"}; shift
;;
finish|finis|fini|fin|fi|f)
shift; set dummy --mode finish ${1+"$@"}; shift
;;
install|instal|insta|inst|ins|in|i)
shift; set dummy --mode install ${1+"$@"}; shift
;;
link|lin|li|l)
shift; set dummy --mode link ${1+"$@"}; shift
;;
uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
shift; set dummy --mode uninstall ${1+"$@"}; shift
;;
esac
# Pass back the list of options.
func_quote_for_eval ${1+"$@"}
libtool_options_prep_result=$func_quote_for_eval_result
}
func_add_hook func_options_prep libtool_options_prep
# libtool_parse_options [ARG]...
# ---------------------------------
# Provide handling for libtool specific options.
libtool_parse_options ()
{
$debug_cmd
# Perform our own loop to consume as many options as possible in
# each iteration.
while test $# -gt 0; do
_G_opt=$1
shift
case $_G_opt in
--dry-run|--dryrun|-n)
opt_dry_run=:
;;
--config) func_config ;;
--dlopen|-dlopen)
opt_dlopen="${opt_dlopen+$opt_dlopen
}$1"
shift
;;
--preserve-dup-deps)
opt_preserve_dup_deps=: ;;
--features) func_features ;;
--finish) set dummy --mode finish ${1+"$@"}; shift ;;
--help) opt_help=: ;;
--help-all) opt_help=': help-all' ;;
--mode) test $# = 0 && func_missing_arg $_G_opt && break
opt_mode=$1
case $1 in
# Valid mode arguments:
clean|compile|execute|finish|install|link|relink|uninstall) ;;
# Catch anything else as an error
*) func_error "invalid argument for $_G_opt"
exit_cmd=exit
break
;;
esac
shift
;;
--no-silent|--no-quiet)
opt_quiet=false
func_append preserve_args " $_G_opt"
;;
--no-warnings|--no-warning|--no-warn)
opt_warning=false
func_append preserve_args " $_G_opt"
;;
--no-verbose)
opt_verbose=false
func_append preserve_args " $_G_opt"
;;
--silent|--quiet)
opt_quiet=:
opt_verbose=false
func_append preserve_args " $_G_opt"
;;
--tag) test $# = 0 && func_missing_arg $_G_opt && break
opt_tag=$1
func_append preserve_args " $_G_opt $1"
func_enable_tag "$1"
shift
;;
--verbose|-v) opt_quiet=false
opt_verbose=:
func_append preserve_args " $_G_opt"
;;
# An option not handled by this hook function:
*) set dummy "$_G_opt" ${1+"$@"}; shift; break ;;
esac
done
# save modified positional parameters for caller
func_quote_for_eval ${1+"$@"}
libtool_parse_options_result=$func_quote_for_eval_result
}
func_add_hook func_parse_options libtool_parse_options
# libtool_validate_options [ARG]...
# ---------------------------------
# Perform any sanity checks on option settings and/or unconsumed
# arguments.
libtool_validate_options ()
{
# save first non-option argument
if test 0 -lt $#; then
nonopt=$1
shift
fi
# preserve --debug
test : = "$debug_cmd" || func_append preserve_args " --debug"
case $host in
# Solaris2 added to fix http://debbugs.gnu.org/cgi/bugreport.cgi?bug=16452
# see also: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=59788
*cygwin* | *mingw* | *pw32* | *cegcc* | *solaris2*)
# don't eliminate duplications in $postdeps and $predeps
opt_duplicate_compiler_generated_deps=:
;;
*)
opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
;;
esac
$opt_help || {
# Sanity checks first:
func_check_version_match
test yes != "$build_libtool_libs" \
&& test yes != "$build_old_libs" \
&& func_fatal_configuration "not configured to build any kind of library"
# Darwin sucks
eval std_shrext=\"$shrext_cmds\"
# Only execute mode is allowed to have -dlopen flags.
if test -n "$opt_dlopen" && test execute != "$opt_mode"; then
func_error "unrecognized option '-dlopen'"
$ECHO "$help" 1>&2
exit $EXIT_FAILURE
fi
# Change the help message to a mode-specific one.
generic_help=$help
help="Try '$progname --help --mode=$opt_mode' for more information."
}
# Pass back the unparsed argument list
func_quote_for_eval ${1+"$@"}
libtool_validate_options_result=$func_quote_for_eval_result
}
func_add_hook func_validate_options libtool_validate_options
# Process options as early as possible so that --help and --version
# can return quickly.
func_options ${1+"$@"}
eval set dummy "$func_options_result"; shift
## ----------- ##
## Main. ##
## ----------- ##
magic='%%%MAGIC variable%%%'
magic_exe='%%%MAGIC EXE variable%%%'
# Global variables.
extracted_archives=
extracted_serial=0
src/subversion/build/ltmain.sh view on Meta::CPAN
case $lalib_p_line in
\#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
esac
done
exec 0<&5 5<&-
fi
test yes = "$lalib_p"
}
# func_ltwrapper_script_p file
# True iff FILE is a libtool wrapper script
# This function is only a basic sanity check; it will hardly flush out
# determined imposters.
func_ltwrapper_script_p ()
{
test -f "$1" &&
$lt_truncate_bin < "$1" 2>/dev/null | func_generated_by_libtool_p
}
# func_ltwrapper_executable_p file
# True iff FILE is a libtool wrapper executable
# This function is only a basic sanity check; it will hardly flush out
# determined imposters.
func_ltwrapper_executable_p ()
{
func_ltwrapper_exec_suffix=
case $1 in
*.exe) ;;
*) func_ltwrapper_exec_suffix=.exe ;;
esac
$GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
}
# func_ltwrapper_scriptname file
# Assumes file is an ltwrapper_executable
# uses $file to determine the appropriate filename for a
# temporary ltwrapper_script.
func_ltwrapper_scriptname ()
{
func_dirname_and_basename "$1" "" "."
func_stripname '' '.exe' "$func_basename_result"
func_ltwrapper_scriptname_result=$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper
}
# func_ltwrapper_p file
# True iff FILE is a libtool wrapper script or wrapper executable
# This function is only a basic sanity check; it will hardly flush out
# determined imposters.
func_ltwrapper_p ()
{
func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
}
# func_execute_cmds commands fail_cmd
# Execute tilde-delimited COMMANDS.
# If FAIL_CMD is given, eval that upon failure.
# FAIL_CMD may read-access the current command in variable CMD!
func_execute_cmds ()
{
$debug_cmd
save_ifs=$IFS; IFS='~'
for cmd in $1; do
IFS=$sp$nl
eval cmd=\"$cmd\"
IFS=$save_ifs
func_show_eval "$cmd" "${2-:}"
done
IFS=$save_ifs
}
# func_source file
# Source FILE, adding directory component if necessary.
# Note that it is not necessary on cygwin/mingw to append a dot to
# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
# behavior happens only for exec(3), not for open(2)! Also, sourcing
# 'FILE.' does not work on cygwin managed mounts.
func_source ()
{
$debug_cmd
case $1 in
*/* | *\\*) . "$1" ;;
*) . "./$1" ;;
esac
}
# func_resolve_sysroot PATH
# Replace a leading = in PATH with a sysroot. Store the result into
# func_resolve_sysroot_result
func_resolve_sysroot ()
{
func_resolve_sysroot_result=$1
case $func_resolve_sysroot_result in
=*)
func_stripname '=' '' "$func_resolve_sysroot_result"
func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
;;
esac
}
# func_replace_sysroot PATH
# If PATH begins with the sysroot, replace it with = and
# store the result into func_replace_sysroot_result.
func_replace_sysroot ()
{
case $lt_sysroot:$1 in
?*:"$lt_sysroot"*)
func_stripname "$lt_sysroot" '' "$1"
func_replace_sysroot_result='='$func_stripname_result
;;
*)
# Including no sysroot.
func_replace_sysroot_result=$1
;;
esac
}
# func_infer_tag arg
# Infer tagged configuration to use if any are available and
# if one wasn't chosen via the "--tag" command line option.
# Only attempt this if the compiler in the base compile
# command doesn't match the default compiler.
# arg is usually of the form 'gcc ...'
func_infer_tag ()
{
$debug_cmd
if test -n "$available_tags" && test -z "$tagname"; then
CC_quoted=
for arg in $CC; do
func_append_quoted CC_quoted "$arg"
done
CC_expanded=`func_echo_all $CC`
CC_quoted_expanded=`func_echo_all $CC_quoted`
case $@ in
# Blanks in the command may have been stripped by the calling shell,
# but not from the CC environment variable when configure was run.
" $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
" $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
# Blanks at the start of $base_compile will cause this to fail
# if we don't check for them as well.
*)
for z in $available_tags; do
if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
# Evaluate the configuration.
eval "`$SED -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
CC_quoted=
for arg in $CC; do
# Double-quote args containing other shell metacharacters.
func_append_quoted CC_quoted "$arg"
done
CC_expanded=`func_echo_all $CC`
CC_quoted_expanded=`func_echo_all $CC_quoted`
case "$@ " in
" $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
" $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)
# The compiler in the base compile command matches
# the one in the tagged configuration.
# Assume this is the tagged configuration we want.
tagname=$z
break
;;
esac
fi
done
# If $tagname still isn't set, then no tagged configuration
# was found and let the user know that the "--tag" command
# line option must be used.
if test -z "$tagname"; then
func_echo "unable to infer tagged configuration"
func_fatal_error "specify a tag with '--tag'"
# else
# func_verbose "using $tagname tagged configuration"
fi
;;
esac
fi
}
# func_write_libtool_object output_name pic_name nonpic_name
# Create a libtool object file (analogous to a ".la" file),
# but don't create it if we're doing a dry run.
func_write_libtool_object ()
{
write_libobj=$1
if test yes = "$build_libtool_libs"; then
write_lobj=\'$2\'
else
write_lobj=none
fi
if test yes = "$build_old_libs"; then
write_oldobj=\'$3\'
else
write_oldobj=none
fi
$opt_dry_run || {
cat >${write_libobj}T <<EOF
# $write_libobj - a libtool object file
# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
#
# Please DO NOT delete this file!
# It is necessary for linking the library.
# Name of the PIC object.
pic_object=$write_lobj
# Name of the non-PIC object
non_pic_object=$write_oldobj
EOF
$MV "${write_libobj}T" "$write_libobj"
}
}
##################################################
# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS #
##################################################
# func_convert_core_file_wine_to_w32 ARG
# Helper function used by file name conversion functions when $build is *nix,
# and $host is mingw, cygwin, or some other w32 environment. Relies on a
# correctly configured wine environment available, with the winepath program
# in $build's $PATH.
#
# ARG is the $build file name to be converted to w32 format.
# Result is available in $func_convert_core_file_wine_to_w32_result, and will
# be empty on error (or when ARG is empty)
func_convert_core_file_wine_to_w32 ()
{
$debug_cmd
func_convert_core_file_wine_to_w32_result=$1
if test -n "$1"; then
# Unfortunately, winepath does not exit with a non-zero error code, so we
# are forced to check the contents of stdout. On the other hand, if the
# command is not found, the shell will set an exit code of 127 and print
# *an error message* to stdout. So we must check for both error code of
# zero AND non-empty stdout, which explains the odd construction:
func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
if test "$?" -eq 0 && test -n "$func_convert_core_file_wine_to_w32_tmp"; then
func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
$SED -e "$sed_naive_backslashify"`
else
func_convert_core_file_wine_to_w32_result=
fi
fi
}
# end: func_convert_core_file_wine_to_w32
# func_convert_core_path_wine_to_w32 ARG
# Helper function used by path conversion functions when $build is *nix, and
# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
# configured wine environment available, with the winepath program in $build's
# $PATH. Assumes ARG has no leading or trailing path separator characters.
#
# ARG is path to be converted from $build format to win32.
# Result is available in $func_convert_core_path_wine_to_w32_result.
# Unconvertible file (directory) names in ARG are skipped; if no directory names
# are convertible, then the result may be empty.
func_convert_core_path_wine_to_w32 ()
{
$debug_cmd
# unfortunately, winepath doesn't convert paths, only file names
func_convert_core_path_wine_to_w32_result=
if test -n "$1"; then
oldIFS=$IFS
IFS=:
for func_convert_core_path_wine_to_w32_f in $1; do
IFS=$oldIFS
func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
if test -n "$func_convert_core_file_wine_to_w32_result"; then
if test -z "$func_convert_core_path_wine_to_w32_result"; then
func_convert_core_path_wine_to_w32_result=$func_convert_core_file_wine_to_w32_result
else
func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
fi
fi
done
IFS=$oldIFS
fi
}
# end: func_convert_core_path_wine_to_w32
# func_cygpath ARGS...
# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
# (2), returns the Cygwin file name or path in func_cygpath_result (input
# file name or path is assumed to be in w32 format, as previously converted
# from $build's *nix or MSYS format). In case (3), returns the w32 file name
# or path in func_cygpath_result (input file name or path is assumed to be in
# Cygwin format). Returns an empty string on error.
#
# ARGS are passed to cygpath, with the last one being the file name or path to
# be converted.
#
# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
# environment variable; do not put it in $PATH.
func_cygpath ()
{
$debug_cmd
if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
if test "$?" -ne 0; then
# on failure, ensure result is empty
func_cygpath_result=
fi
else
func_cygpath_result=
func_error "LT_CYGPATH is empty or specifies non-existent file: '$LT_CYGPATH'"
fi
}
#end: func_cygpath
# func_convert_core_msys_to_w32 ARG
# Convert file name or path ARG from MSYS format to w32 format. Return
# result in func_convert_core_msys_to_w32_result.
func_convert_core_msys_to_w32 ()
{
$debug_cmd
# awkward: cmd appends spaces to result
func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
$SED -e 's/[ ]*$//' -e "$sed_naive_backslashify"`
}
#end: func_convert_core_msys_to_w32
# func_convert_file_check ARG1 ARG2
# Verify that ARG1 (a file name in $build format) was converted to $host
# format in ARG2. Otherwise, emit an error message, but continue (resetting
# func_to_host_file_result to ARG1).
func_convert_file_check ()
{
$debug_cmd
if test -z "$2" && test -n "$1"; then
func_error "Could not determine host file name corresponding to"
func_error " '$1'"
func_error "Continuing, but uninstalled executables may not work."
# Fallback:
func_to_host_file_result=$1
fi
}
# end func_convert_file_check
# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
# Verify that FROM_PATH (a path in $build format) was converted to $host
# format in TO_PATH. Otherwise, emit an error message, but continue, resetting
# func_to_host_file_result to a simplistic fallback value (see below).
func_convert_path_check ()
{
$debug_cmd
if test -z "$4" && test -n "$3"; then
func_error "Could not determine the host path corresponding to"
func_error " '$3'"
func_error "Continuing, but uninstalled executables may not work."
# Fallback. This is a deliberately simplistic "conversion" and
# should not be "improved". See libtool.info.
if test "x$1" != "x$2"; then
lt_replace_pathsep_chars="s|$1|$2|g"
func_to_host_path_result=`echo "$3" |
$SED -e "$lt_replace_pathsep_chars"`
else
func_to_host_path_result=$3
fi
fi
}
# end func_convert_path_check
# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
# and appending REPL if ORIG matches BACKPAT.
func_convert_path_front_back_pathsep ()
{
$debug_cmd
case $4 in
$1 ) func_to_host_path_result=$3$func_to_host_path_result
;;
esac
case $4 in
$2 ) func_append func_to_host_path_result "$3"
;;
esac
}
# end func_convert_path_front_back_pathsep
##################################################
# $build to $host FILE NAME CONVERSION FUNCTIONS #
##################################################
# invoked via '$to_host_file_cmd ARG'
#
# In each case, ARG is the path to be converted from $build to $host format.
# Result will be available in $func_to_host_file_result.
# func_to_host_file ARG
# Converts the file name ARG from $build format to $host format. Return result
# in func_to_host_file_result.
func_to_host_file ()
{
$debug_cmd
$to_host_file_cmd "$1"
}
# end func_to_host_file
# func_to_tool_file ARG LAZY
# converts the file name ARG from $build format to toolchain format. Return
# result in func_to_tool_file_result. If the conversion in use is listed
# in (the comma separated) LAZY, no conversion takes place.
func_to_tool_file ()
{
$debug_cmd
case ,$2, in
*,"$to_tool_file_cmd",*)
func_to_tool_file_result=$1
;;
*)
$to_tool_file_cmd "$1"
func_to_tool_file_result=$func_to_host_file_result
;;
esac
}
# end func_to_tool_file
# func_convert_file_noop ARG
# Copy ARG to func_to_host_file_result.
func_convert_file_noop ()
{
func_to_host_file_result=$1
}
# end func_convert_file_noop
# func_convert_file_msys_to_w32 ARG
# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
# conversion to w32 is not available inside the cwrapper. Returns result in
# func_to_host_file_result.
func_convert_file_msys_to_w32 ()
{
$debug_cmd
func_to_host_file_result=$1
if test -n "$1"; then
func_convert_core_msys_to_w32 "$1"
func_to_host_file_result=$func_convert_core_msys_to_w32_result
fi
func_convert_file_check "$1" "$func_to_host_file_result"
}
# end func_convert_file_msys_to_w32
# func_convert_file_cygwin_to_w32 ARG
# Convert file name ARG from Cygwin to w32 format. Returns result in
# func_to_host_file_result.
func_convert_file_cygwin_to_w32 ()
{
$debug_cmd
func_to_host_file_result=$1
if test -n "$1"; then
# because $build is cygwin, we call "the" cygpath in $PATH; no need to use
# LT_CYGPATH in this case.
func_to_host_file_result=`cygpath -m "$1"`
fi
func_convert_file_check "$1" "$func_to_host_file_result"
}
# end func_convert_file_cygwin_to_w32
# func_convert_file_nix_to_w32 ARG
# Convert file name ARG from *nix to w32 format. Requires a wine environment
# and a working winepath. Returns result in func_to_host_file_result.
func_convert_file_nix_to_w32 ()
{
$debug_cmd
func_to_host_file_result=$1
if test -n "$1"; then
func_convert_core_file_wine_to_w32 "$1"
func_to_host_file_result=$func_convert_core_file_wine_to_w32_result
fi
func_convert_file_check "$1" "$func_to_host_file_result"
}
# end func_convert_file_nix_to_w32
# func_convert_file_msys_to_cygwin ARG
# Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set.
# Returns result in func_to_host_file_result.
func_convert_file_msys_to_cygwin ()
{
$debug_cmd
func_to_host_file_result=$1
if test -n "$1"; then
func_convert_core_msys_to_w32 "$1"
func_cygpath -u "$func_convert_core_msys_to_w32_result"
func_to_host_file_result=$func_cygpath_result
fi
func_convert_file_check "$1" "$func_to_host_file_result"
}
# end func_convert_file_msys_to_cygwin
# func_convert_file_nix_to_cygwin ARG
# Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed
# in a wine environment, working winepath, and LT_CYGPATH set. Returns result
# in func_to_host_file_result.
func_convert_file_nix_to_cygwin ()
{
$debug_cmd
func_to_host_file_result=$1
if test -n "$1"; then
# convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
func_convert_core_file_wine_to_w32 "$1"
func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
func_to_host_file_result=$func_cygpath_result
fi
func_convert_file_check "$1" "$func_to_host_file_result"
}
# end func_convert_file_nix_to_cygwin
#############################################
# $build to $host PATH CONVERSION FUNCTIONS #
#############################################
# invoked via '$to_host_path_cmd ARG'
#
# In each case, ARG is the path to be converted from $build to $host format.
# The result will be available in $func_to_host_path_result.
#
# Path separators are also converted from $build format to $host format. If
# ARG begins or ends with a path separator character, it is preserved (but
# converted to $host format) on output.
#
# All path conversion functions are named using the following convention:
# file name conversion function : func_convert_file_X_to_Y ()
# path conversion function : func_convert_path_X_to_Y ()
# where, for any given $build/$host combination the 'X_to_Y' value is the
# same. If conversion functions are added for new $build/$host combinations,
# the two new functions must follow this pattern, or func_init_to_host_path_cmd
# will break.
# func_init_to_host_path_cmd
# Ensures that function "pointer" variable $to_host_path_cmd is set to the
# appropriate value, based on the value of $to_host_file_cmd.
to_host_path_cmd=
func_init_to_host_path_cmd ()
{
$debug_cmd
if test -z "$to_host_path_cmd"; then
func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
to_host_path_cmd=func_convert_path_$func_stripname_result
fi
}
# func_to_host_path ARG
# Converts the path ARG from $build format to $host format. Return result
# in func_to_host_path_result.
func_to_host_path ()
{
$debug_cmd
func_init_to_host_path_cmd
$to_host_path_cmd "$1"
}
# end func_to_host_path
# func_convert_path_noop ARG
# Copy ARG to func_to_host_path_result.
func_convert_path_noop ()
{
func_to_host_path_result=$1
}
# end func_convert_path_noop
# func_convert_path_msys_to_w32 ARG
# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
# conversion to w32 is not available inside the cwrapper. Returns result in
# func_to_host_path_result.
func_convert_path_msys_to_w32 ()
{
$debug_cmd
func_to_host_path_result=$1
if test -n "$1"; then
# Remove leading and trailing path separator characters from ARG. MSYS
# behavior is inconsistent here; cygpath turns them into '.;' and ';.';
# and winepath ignores them completely.
func_stripname : : "$1"
func_to_host_path_tmp1=$func_stripname_result
func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
func_to_host_path_result=$func_convert_core_msys_to_w32_result
func_convert_path_check : ";" \
"$func_to_host_path_tmp1" "$func_to_host_path_result"
func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
fi
}
# end func_convert_path_msys_to_w32
# func_convert_path_cygwin_to_w32 ARG
# Convert path ARG from Cygwin to w32 format. Returns result in
# func_to_host_file_result.
func_convert_path_cygwin_to_w32 ()
{
$debug_cmd
func_to_host_path_result=$1
if test -n "$1"; then
# See func_convert_path_msys_to_w32:
func_stripname : : "$1"
func_to_host_path_tmp1=$func_stripname_result
func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
func_convert_path_check : ";" \
"$func_to_host_path_tmp1" "$func_to_host_path_result"
func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
fi
}
# end func_convert_path_cygwin_to_w32
# func_convert_path_nix_to_w32 ARG
# Convert path ARG from *nix to w32 format. Requires a wine environment and
# a working winepath. Returns result in func_to_host_file_result.
func_convert_path_nix_to_w32 ()
{
$debug_cmd
func_to_host_path_result=$1
if test -n "$1"; then
# See func_convert_path_msys_to_w32:
func_stripname : : "$1"
func_to_host_path_tmp1=$func_stripname_result
func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
func_to_host_path_result=$func_convert_core_path_wine_to_w32_result
func_convert_path_check : ";" \
"$func_to_host_path_tmp1" "$func_to_host_path_result"
func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
fi
}
# end func_convert_path_nix_to_w32
# func_convert_path_msys_to_cygwin ARG
# Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set.
# Returns result in func_to_host_file_result.
func_convert_path_msys_to_cygwin ()
{
$debug_cmd
func_to_host_path_result=$1
if test -n "$1"; then
# See func_convert_path_msys_to_w32:
func_stripname : : "$1"
func_to_host_path_tmp1=$func_stripname_result
func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
func_to_host_path_result=$func_cygpath_result
func_convert_path_check : : \
"$func_to_host_path_tmp1" "$func_to_host_path_result"
func_convert_path_front_back_pathsep ":*" "*:" : "$1"
fi
}
# end func_convert_path_msys_to_cygwin
# func_convert_path_nix_to_cygwin ARG
# Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a
# a wine environment, working winepath, and LT_CYGPATH set. Returns result in
# func_to_host_file_result.
func_convert_path_nix_to_cygwin ()
{
$debug_cmd
func_to_host_path_result=$1
if test -n "$1"; then
# Remove leading and trailing path separator characters from
# ARG. msys behavior is inconsistent here, cygpath turns them
# into '.;' and ';.', and winepath ignores them completely.
func_stripname : : "$1"
func_to_host_path_tmp1=$func_stripname_result
func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
func_to_host_path_result=$func_cygpath_result
func_convert_path_check : : \
"$func_to_host_path_tmp1" "$func_to_host_path_result"
func_convert_path_front_back_pathsep ":*" "*:" : "$1"
fi
}
# end func_convert_path_nix_to_cygwin
# func_dll_def_p FILE
# True iff FILE is a Windows DLL '.def' file.
# Keep in sync with _LT_DLL_DEF_P in libtool.m4
func_dll_def_p ()
{
$debug_cmd
func_dll_def_p_tmp=`$SED -n \
-e 's/^[ ]*//' \
-e '/^\(;.*\)*$/d' \
-e 's/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p' \
-e q \
"$1"`
test DEF = "$func_dll_def_p_tmp"
}
# func_mode_compile arg...
func_mode_compile ()
{
$debug_cmd
# Get the compilation command and the source file.
base_compile=
srcfile=$nonopt # always keep a non-empty value in "srcfile"
suppress_opt=yes
suppress_output=
arg_mode=normal
libobj=
later=
pie_flag=
for arg
do
case $arg_mode in
arg )
# do not "continue". Instead, add this to base_compile
lastarg=$arg
arg_mode=normal
;;
target )
libobj=$arg
arg_mode=normal
continue
;;
normal )
# Accept any command-line options.
case $arg in
-o)
test -n "$libobj" && \
func_fatal_error "you cannot specify '-o' more than once"
arg_mode=target
continue
;;
-pie | -fpie | -fPIE)
func_append pie_flag " $arg"
continue
;;
-shared | -static | -prefer-pic | -prefer-non-pic)
func_append later " $arg"
continue
;;
-no-suppress)
suppress_opt=no
continue
;;
-Xcompiler)
arg_mode=arg # the next one goes into the "base_compile" arg list
continue # The current "srcfile" will either be retained or
;; # replaced later. I would guess that would be a bug.
-Wc,*)
func_stripname '-Wc,' '' "$arg"
args=$func_stripname_result
lastarg=
src/subversion/build/ltmain.sh view on Meta::CPAN
;;
uninstall)
$ECHO \
"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
Remove libraries from an installation directory.
RM is the name of the program to use to delete files associated with each FILE
(typically '/bin/rm'). RM-OPTIONS are options (such as '-f') to be passed
to RM.
If FILE is a libtool library, all the files associated with it are deleted.
Otherwise, only FILE itself is deleted using RM."
;;
*)
func_fatal_help "invalid operation mode '$opt_mode'"
;;
esac
echo
$ECHO "Try '$progname --help' for more information about other modes."
}
# Now that we've collected a possible --mode arg, show help if necessary
if $opt_help; then
if test : = "$opt_help"; then
func_mode_help
else
{
func_help noexit
for opt_mode in compile link execute install finish uninstall clean; do
func_mode_help
done
} | $SED -n '1p; 2,$s/^Usage:/ or: /p'
{
func_help noexit
for opt_mode in compile link execute install finish uninstall clean; do
echo
func_mode_help
done
} |
$SED '1d
/^When reporting/,/^Report/{
H
d
}
$x
/information about other modes/d
/more detailed .*MODE/d
s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
fi
exit $?
fi
# func_mode_execute arg...
func_mode_execute ()
{
$debug_cmd
# The first argument is the command name.
cmd=$nonopt
test -z "$cmd" && \
func_fatal_help "you must specify a COMMAND"
# Handle -dlopen flags immediately.
for file in $opt_dlopen; do
test -f "$file" \
|| func_fatal_help "'$file' is not a file"
dir=
case $file in
*.la)
func_resolve_sysroot "$file"
file=$func_resolve_sysroot_result
# Check to see that this really is a libtool archive.
func_lalib_unsafe_p "$file" \
|| func_fatal_help "'$lib' is not a valid libtool archive"
# Read the libtool library.
dlname=
library_names=
func_source "$file"
# Skip this library if it cannot be dlopened.
if test -z "$dlname"; then
# Warn if it was a shared library.
test -n "$library_names" && \
func_warning "'$file' was not linked with '-export-dynamic'"
continue
fi
func_dirname "$file" "" "."
dir=$func_dirname_result
if test -f "$dir/$objdir/$dlname"; then
func_append dir "/$objdir"
else
if test ! -f "$dir/$dlname"; then
func_fatal_error "cannot find '$dlname' in '$dir' or '$dir/$objdir'"
fi
fi
;;
*.lo)
# Just add the directory containing the .lo file.
func_dirname "$file" "" "."
dir=$func_dirname_result
;;
*)
func_warning "'-dlopen' is ignored for non-libtool libraries and objects"
continue
;;
esac
# Get the absolute pathname.
absdir=`cd "$dir" && pwd`
src/subversion/build/ltmain.sh view on Meta::CPAN
# Check if any of the arguments is a wrapper script.
args=
for file
do
case $file in
-* | *.la | *.lo ) ;;
*)
# Do a test to see if this is really a libtool program.
if func_ltwrapper_script_p "$file"; then
func_source "$file"
# Transform arg to wrapped name.
file=$progdir/$program
elif func_ltwrapper_executable_p "$file"; then
func_ltwrapper_scriptname "$file"
func_source "$func_ltwrapper_scriptname_result"
# Transform arg to wrapped name.
file=$progdir/$program
fi
;;
esac
# Quote arguments (to preserve shell metacharacters).
func_append_quoted args "$file"
done
if $opt_dry_run; then
# Display what would be done.
if test -n "$shlibpath_var"; then
eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
echo "export $shlibpath_var"
fi
$ECHO "$cmd$args"
exit $EXIT_SUCCESS
else
if test -n "$shlibpath_var"; then
# Export the shlibpath_var.
eval "export $shlibpath_var"
fi
# Restore saved environment variables
for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
do
eval "if test \"\${save_$lt_var+set}\" = set; then
$lt_var=\$save_$lt_var; export $lt_var
else
$lt_unset $lt_var
fi"
done
# Now prepare to actually exec the command.
exec_cmd=\$cmd$args
fi
}
test execute = "$opt_mode" && func_mode_execute ${1+"$@"}
# func_mode_finish arg...
func_mode_finish ()
{
$debug_cmd
libs=
libdirs=
admincmds=
for opt in "$nonopt" ${1+"$@"}
do
if test -d "$opt"; then
func_append libdirs " $opt"
elif test -f "$opt"; then
if func_lalib_unsafe_p "$opt"; then
func_append libs " $opt"
else
func_warning "'$opt' is not a valid libtool archive"
fi
else
func_fatal_error "invalid argument '$opt'"
fi
done
if test -n "$libs"; then
if test -n "$lt_sysroot"; then
sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
else
sysroot_cmd=
fi
# Remove sysroot references
if $opt_dry_run; then
for lib in $libs; do
echo "removing references to $lt_sysroot and '=' prefixes from $lib"
done
else
tmpdir=`func_mktempdir`
for lib in $libs; do
$SED -e "$sysroot_cmd s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
> $tmpdir/tmp-la
mv -f $tmpdir/tmp-la $lib
done
${RM}r "$tmpdir"
fi
fi
if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
for libdir in $libdirs; do
if test -n "$finish_cmds"; then
# Do each command in the finish commands.
func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
'"$cmd"'"'
fi
if test -n "$finish_eval"; then
# Do the single finish_eval.
eval cmds=\"$finish_eval\"
$opt_dry_run || eval "$cmds" || func_append admincmds "
$cmds"
fi
done
fi
# Exit here if they wanted silent mode.
$opt_quiet && exit $EXIT_SUCCESS
if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
echo "----------------------------------------------------------------------"
echo "Libraries have been installed in:"
for libdir in $libdirs; do
$ECHO " $libdir"
done
echo
echo "If you ever happen to want to link against installed libraries"
echo "in a given directory, LIBDIR, you must either use libtool, and"
echo "specify the full pathname of the library, or use the '-LLIBDIR'"
echo "flag during linking and do at least one of the following:"
if test -n "$shlibpath_var"; then
echo " - add LIBDIR to the '$shlibpath_var' environment variable"
echo " during execution"
fi
if test -n "$runpath_var"; then
echo " - add LIBDIR to the '$runpath_var' environment variable"
echo " during linking"
fi
if test -n "$hardcode_libdir_flag_spec"; then
libdir=LIBDIR
eval flag=\"$hardcode_libdir_flag_spec\"
$ECHO " - use the '$flag' linker flag"
fi
if test -n "$admincmds"; then
$ECHO " - have your system administrator run these commands:$admincmds"
fi
if test -f /etc/ld.so.conf; then
echo " - have your system administrator add LIBDIR to '/etc/ld.so.conf'"
fi
echo
echo "See any operating system documentation about shared libraries for"
case $host in
solaris2.[6789]|solaris2.1[0-9])
echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
echo "pages."
;;
*)
echo "more information, such as the ld(1) and ld.so(8) manual pages."
;;
esac
echo "----------------------------------------------------------------------"
fi
exit $EXIT_SUCCESS
}
test finish = "$opt_mode" && func_mode_finish ${1+"$@"}
# func_mode_install arg...
func_mode_install ()
{
$debug_cmd
# There may be an optional sh(1) argument at the beginning of
# install_prog (especially on Windows NT).
if test "$SHELL" = "$nonopt" || test /bin/sh = "$nonopt" ||
# Allow the use of GNU shtool's install command.
case $nonopt in *shtool*) :;; *) false;; esac
then
# Aesthetically quote it.
func_quote_for_eval "$nonopt"
install_prog="$func_quote_for_eval_result "
arg=$1
shift
else
install_prog=
arg=$nonopt
fi
# The real first argument should be the name of the installation program.
# Aesthetically quote it.
func_quote_for_eval "$arg"
func_append install_prog "$func_quote_for_eval_result"
install_shared_prog=$install_prog
case " $install_prog " in
*[\\\ /]cp\ *) install_cp=: ;;
*) install_cp=false ;;
esac
# We need to accept at least all the BSD install flags.
dest=
files=
opts=
prev=
install_type=
isdir=false
stripme=
no_mode=:
for arg
do
arg2=
if test -n "$dest"; then
func_append files " $dest"
dest=$arg
continue
fi
case $arg in
-d) isdir=: ;;
-f)
if $install_cp; then :; else
prev=$arg
fi
;;
-g | -m | -o)
prev=$arg
;;
-s)
stripme=" -s"
continue
;;
-*)
src/subversion/build/ltmain.sh view on Meta::CPAN
*.exe:*.exe)
# this is ok
;;
*.exe:*)
destfile=$destfile.exe
;;
*:*.exe)
func_stripname '' '.exe' "$destfile"
destfile=$func_stripname_result
;;
esac
;;
esac
func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
$opt_dry_run || if test -n "$outputname"; then
${RM}r "$tmpdir"
fi
;;
esac
done
for file in $staticlibs; do
func_basename "$file"
name=$func_basename_result
# Set up the ranlib parameters.
oldlib=$destdir/$name
func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
tool_oldlib=$func_to_tool_file_result
func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
if test -n "$stripme" && test -n "$old_striplib"; then
func_show_eval "$old_striplib $tool_oldlib" 'exit $?'
fi
# Do each command in the postinstall commands.
func_execute_cmds "$old_postinstall_cmds" 'exit $?'
done
test -n "$future_libdirs" && \
func_warning "remember to run '$progname --finish$future_libdirs'"
if test -n "$current_libdirs"; then
# Maybe just do a dry run.
$opt_dry_run && current_libdirs=" -n$current_libdirs"
exec_cmd='$SHELL "$progpath" $preserve_args --finish$current_libdirs'
else
exit $EXIT_SUCCESS
fi
}
test install = "$opt_mode" && func_mode_install ${1+"$@"}
# func_generate_dlsyms outputname originator pic_p
# Extract symbols from dlprefiles and create ${outputname}S.o with
# a dlpreopen symbol table.
func_generate_dlsyms ()
{
$debug_cmd
my_outputname=$1
my_originator=$2
my_pic_p=${3-false}
my_prefix=`$ECHO "$my_originator" | $SED 's%[^a-zA-Z0-9]%_%g'`
my_dlsyms=
if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
if test -n "$NM" && test -n "$global_symbol_pipe"; then
my_dlsyms=${my_outputname}S.c
else
func_error "not configured to extract global symbols from dlpreopened files"
fi
fi
if test -n "$my_dlsyms"; then
case $my_dlsyms in
"") ;;
*.c)
# Discover the nlist of each of the dlfiles.
nlist=$output_objdir/$my_outputname.nm
func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
# Parse the name list into a source file.
func_verbose "creating $output_objdir/$my_dlsyms"
$opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
/* $my_dlsyms - symbol resolution table for '$my_outputname' dlsym emulation. */
/* Generated by $PROGRAM (GNU $PACKAGE) $VERSION */
#ifdef __cplusplus
extern \"C\" {
#endif
#if defined __GNUC__ && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
#endif
/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
/* DATA imports from DLLs on WIN32 can't be const, because runtime
relocations are performed -- see ld's documentation on pseudo-relocs. */
# define LT_DLSYM_CONST
#elif defined __osf__
/* This system does not cope well with relocations in const data. */
# define LT_DLSYM_CONST
#else
# define LT_DLSYM_CONST const
#endif
#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0)
/* External symbol declarations for the compiler. */\
"
if test yes = "$dlself"; then
func_verbose "generating symbol list for '$output'"
$opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
src/subversion/build/ltmain.sh view on Meta::CPAN
pic_flag_for_symtable=" $pic_flag" ;;
*)
$my_pic_p && pic_flag_for_symtable=" $pic_flag"
;;
esac
;;
esac
symtab_cflags=
for arg in $LTCFLAGS; do
case $arg in
-pie | -fpie | -fPIE) ;;
*) func_append symtab_cflags " $arg" ;;
esac
done
# Now compile the dynamic symbol file.
func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
# Clean up the generated files.
func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T" "${nlist}I"'
# Transform the symbol file into the correct name.
symfileobj=$output_objdir/${my_outputname}S.$objext
case $host in
*cygwin* | *mingw* | *cegcc* )
if test -f "$output_objdir/$my_outputname.def"; then
compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
else
compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
fi
;;
*)
compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
;;
esac
;;
*)
func_fatal_error "unknown suffix for '$my_dlsyms'"
;;
esac
else
# We keep going just in case the user didn't refer to
# lt_preloaded_symbols. The linker will fail if global_symbol_pipe
# really was required.
# Nullify the symbol file.
compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
fi
}
# func_cygming_gnu_implib_p ARG
# This predicate returns with zero status (TRUE) if
# ARG is a GNU/binutils-style import library. Returns
# with nonzero status (FALSE) otherwise.
func_cygming_gnu_implib_p ()
{
$debug_cmd
func_to_tool_file "$1" func_convert_file_msys_to_w32
func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
test -n "$func_cygming_gnu_implib_tmp"
}
# func_cygming_ms_implib_p ARG
# This predicate returns with zero status (TRUE) if
# ARG is an MS-style import library. Returns
# with nonzero status (FALSE) otherwise.
func_cygming_ms_implib_p ()
{
$debug_cmd
func_to_tool_file "$1" func_convert_file_msys_to_w32
func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
test -n "$func_cygming_ms_implib_tmp"
}
# func_win32_libid arg
# return the library type of file 'arg'
#
# Need a lot of goo to handle *both* DLLs and import libs
# Has to be a shell function in order to 'eat' the argument
# that is supplied when $file_magic_command is called.
# Despite the name, also deal with 64 bit binaries.
func_win32_libid ()
{
$debug_cmd
win32_libid_type=unknown
win32_fileres=`file -L $1 2>/dev/null`
case $win32_fileres in
*ar\ archive\ import\ library*) # definitely import
win32_libid_type="x86 archive import"
;;
*ar\ archive*) # could be an import, or static
# Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
$EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
case $nm_interface in
"MS dumpbin")
if func_cygming_ms_implib_p "$1" ||
func_cygming_gnu_implib_p "$1"
then
win32_nmres=import
else
win32_nmres=
fi
;;
*)
func_to_tool_file "$1" func_convert_file_msys_to_w32
win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
$SED -n -e '
1,100{
/ I /{
s|.*|import|
p
q
}
}'`
;;
esac
case $win32_nmres in
import*) win32_libid_type="x86 archive import";;
*) win32_libid_type="x86 archive static";;
esac
fi
;;
*DLL*)
win32_libid_type="x86 DLL"
;;
*executable*) # but shell scripts are "executable" too...
case $win32_fileres in
*MS\ Windows\ PE\ Intel*)
win32_libid_type="x86 DLL"
;;
esac
;;
esac
$ECHO "$win32_libid_type"
}
# func_cygming_dll_for_implib ARG
#
# Platform-specific function to extract the
# name of the DLL associated with the specified
# import library ARG.
# Invoked by eval'ing the libtool variable
# $sharedlib_from_linklib_cmd
# Result is available in the variable
# $sharedlib_from_linklib_result
func_cygming_dll_for_implib ()
{
$debug_cmd
sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
}
# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs
#
# The is the core of a fallback implementation of a
# platform-specific function to extract the name of the
# DLL associated with the specified import library LIBNAME.
#
# SECTION_NAME is either .idata$6 or .idata$7, depending
# on the platform and compiler that created the implib.
#
# Echos the name of the DLL associated with the
# specified import library.
func_cygming_dll_for_implib_fallback_core ()
{
$debug_cmd
match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
$OBJDUMP -s --section "$1" "$2" 2>/dev/null |
$SED '/^Contents of section '"$match_literal"':/{
# Place marker at beginning of archive member dllname section
s/.*/====MARK====/
p
d
}
# These lines can sometimes be longer than 43 characters, but
# are always uninteresting
/:[ ]*file format pe[i]\{,1\}-/d
/^In archive [^:]*:/d
# Ensure marker is printed
/^====MARK====/p
# Remove all lines with less than 43 characters
/^.\{43\}/!d
# From remaining lines, remove first 43 characters
s/^.\{43\}//' |
$SED -n '
# Join marker and all lines until next marker into a single line
/^====MARK====/ b para
H
$ b para
b
:para
x
s/\n//g
# Remove the marker
s/^====MARK====//
# Remove trailing dots and whitespace
s/[\. \t]*$//
# Print
/./p' |
# we now have a list, one entry per line, of the stringified
# contents of the appropriate section of all members of the
# archive that possess that section. Heuristic: eliminate
# all those that have a first or second character that is
# a '.' (that is, objdump's representation of an unprintable
# character.) This should work for all archives with less than
# 0x302f exports -- but will fail for DLLs whose name actually
# begins with a literal '.' or a single character followed by
# a '.'.
#
# Of those that remain, print the first one.
$SED -e '/^\./d;/^.\./d;q'
}
# func_cygming_dll_for_implib_fallback ARG
# Platform-specific function to extract the
# name of the DLL associated with the specified
# import library ARG.
#
# This fallback implementation is for use when $DLLTOOL
# does not support the --identify-strict option.
# Invoked by eval'ing the libtool variable
# $sharedlib_from_linklib_cmd
# Result is available in the variable
# $sharedlib_from_linklib_result
func_cygming_dll_for_implib_fallback ()
{
$debug_cmd
if func_cygming_gnu_implib_p "$1"; then
# binutils import library
sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
elif func_cygming_ms_implib_p "$1"; then
# ms-generated import library
sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
else
# unknown
sharedlib_from_linklib_result=
fi
}
# func_extract_an_archive dir oldlib
func_extract_an_archive ()
{
$debug_cmd
f_ex_an_ar_dir=$1; shift
f_ex_an_ar_oldlib=$1
if test yes = "$lock_old_archive_extraction"; then
lockfile=$f_ex_an_ar_oldlib.lock
until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
func_echo "Waiting for $lockfile to be removed"
sleep 2
done
fi
func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
'stat=$?; rm -f "$lockfile"; exit $stat'
if test yes = "$lock_old_archive_extraction"; then
$opt_dry_run || rm -f "$lockfile"
fi
if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
:
else
func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
fi
}
# func_extract_archives gentop oldlib ...
func_extract_archives ()
{
$debug_cmd
my_gentop=$1; shift
my_oldlibs=${1+"$@"}
my_oldobjs=
my_xlib=
my_xabs=
my_xdir=
for my_xlib in $my_oldlibs; do
# Extract the objects.
case $my_xlib in
[\\/]* | [A-Za-z]:[\\/]*) my_xabs=$my_xlib ;;
*) my_xabs=`pwd`"/$my_xlib" ;;
esac
func_basename "$my_xlib"
my_xlib=$func_basename_result
my_xlib_u=$my_xlib
while :; do
case " $extracted_archives " in
*" $my_xlib_u "*)
func_arith $extracted_serial + 1
extracted_serial=$func_arith_result
my_xlib_u=lt$extracted_serial-$my_xlib ;;
*) break ;;
esac
done
extracted_archives="$extracted_archives $my_xlib_u"
my_xdir=$my_gentop/$my_xlib_u
func_mkdir_p "$my_xdir"
case $host in
*-darwin*)
func_verbose "Extracting $my_xabs"
# Do not bother doing anything if just a dry run
$opt_dry_run || {
darwin_orig_dir=`pwd`
cd $my_xdir || exit $?
darwin_archive=$my_xabs
darwin_curdir=`pwd`
func_basename "$darwin_archive"
darwin_base_archive=$func_basename_result
darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
if test -n "$darwin_arches"; then
darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
darwin_arch=
func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
for darwin_arch in $darwin_arches; do
func_mkdir_p "unfat-$$/$darwin_base_archive-$darwin_arch"
$LIPO -thin $darwin_arch -output "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive" "$darwin_archive"
cd "unfat-$$/$darwin_base_archive-$darwin_arch"
func_extract_an_archive "`pwd`" "$darwin_base_archive"
cd "$darwin_curdir"
$RM "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive"
done # $darwin_arches
## Okay now we've a bunch of thin objects, gotta fatten them up :)
darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
darwin_file=
darwin_files=
for darwin_file in $darwin_filelist; do
src/subversion/build/ltmain.sh view on Meta::CPAN
# The $output program cannot be directly executed until all the libtool
# libraries that it depends on are installed.
#
# This wrapper script should never be moved out of the build directory.
# If it is, it will not operate correctly.
# Sed substitution that helps us do robust quoting. It backslashifies
# metacharacters that are still active within double-quoted strings.
sed_quote_subst='$sed_quote_subst'
# Be Bourne compatible
if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
emulate sh
NULLCMD=:
# Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
# is contrary to our usage. Disable this feature.
alias -g '\${1+\"\$@\"}'='\"\$@\"'
setopt NO_GLOB_SUBST
else
case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
fi
BIN_SH=xpg4; export BIN_SH # for Tru64
DUALCASE=1; export DUALCASE # for MKS sh
# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
relink_command=\"$relink_command\"
# This environment variable determines our operation mode.
if test \"\$libtool_install_magic\" = \"$magic\"; then
# install mode needs the following variables:
generated_by_libtool_version='$macro_version'
notinst_deplibs='$notinst_deplibs'
else
# When we are sourced in execute mode, \$file and \$ECHO are already set.
if test \"\$libtool_execute_magic\" != \"$magic\"; then
file=\"\$0\""
qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"`
$ECHO "\
# A function that is used when there is no print builtin or printf.
func_fallback_echo ()
{
eval 'cat <<_LTECHO_EOF
\$1
_LTECHO_EOF'
}
ECHO=\"$qECHO\"
fi
# Very basic option parsing. These options are (a) specific to
# the libtool wrapper, (b) are identical between the wrapper
# /script/ and the wrapper /executable/ that is used only on
# windows platforms, and (c) all begin with the string "--lt-"
# (application programs are unlikely to have options that match
# this pattern).
#
# There are only two supported options: --lt-debug and
# --lt-dump-script. There is, deliberately, no --lt-help.
#
# The first argument to this parsing function should be the
# script's $0 value, followed by "$@".
lt_option_debug=
func_parse_lt_options ()
{
lt_script_arg0=\$0
shift
for lt_opt
do
case \"\$lt_opt\" in
--lt-debug) lt_option_debug=1 ;;
--lt-dump-script)
lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
cat \"\$lt_dump_D/\$lt_dump_F\"
exit 0
;;
--lt-*)
\$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
exit 1
;;
esac
done
# Print the debug banner immediately:
if test -n \"\$lt_option_debug\"; then
echo \"$outputname:$output:\$LINENO: libtool wrapper (GNU $PACKAGE) $VERSION\" 1>&2
fi
}
# Used when --lt-debug. Prints its arguments to stdout
# (redirection is the responsibility of the caller)
func_lt_dump_args ()
{
lt_dump_args_N=1;
for lt_arg
do
\$ECHO \"$outputname:$output:\$LINENO: newargv[\$lt_dump_args_N]: \$lt_arg\"
lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
done
}
# Core function for launching the target application
func_exec_program_core ()
{
"
case $host in
# Backslashes separate directories on plain windows
*-*-mingw | *-*-os2* | *-cegcc*)
$ECHO "\
if test -n \"\$lt_option_debug\"; then
\$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir\\\\\$program\" 1>&2
func_lt_dump_args \${1+\"\$@\"} 1>&2
fi
exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
"
;;
*)
$ECHO "\
if test -n \"\$lt_option_debug\"; then
\$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir/\$program\" 1>&2
func_lt_dump_args \${1+\"\$@\"} 1>&2
fi
exec \"\$progdir/\$program\" \${1+\"\$@\"}
"
;;
esac
$ECHO "\
\$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
exit 1
}
# A function to encapsulate launching the target application
# Strips options in the --lt-* namespace from \$@ and
# launches target application with the remaining arguments.
func_exec_program ()
{
case \" \$* \" in
*\\ --lt-*)
for lt_wr_arg
do
case \$lt_wr_arg in
--lt-*) ;;
*) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
esac
shift
done ;;
esac
func_exec_program_core \${1+\"\$@\"}
}
# Parse options
func_parse_lt_options \"\$0\" \${1+\"\$@\"}
# Find the directory that this script lives in.
thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
test \"x\$thisdir\" = \"x\$file\" && thisdir=.
# Follow symbolic links until we get to the real thisdir.
file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`
while test -n \"\$file\"; do
destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`
# If there was a directory component, then change thisdir.
if test \"x\$destdir\" != \"x\$file\"; then
case \"\$destdir\" in
[\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
*) thisdir=\"\$thisdir/\$destdir\" ;;
esac
fi
file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`
done
# Usually 'no', except on cygwin/mingw when embedded into
# the cwrapper.
WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
# special case for '.'
src/subversion/build/ltmain.sh view on Meta::CPAN
#if defined PATH_MAX
# define LT_PATHMAX PATH_MAX
#elif defined MAXPATHLEN
# define LT_PATHMAX MAXPATHLEN
#else
# define LT_PATHMAX 1024
#endif
#ifndef S_IXOTH
# define S_IXOTH 0
#endif
#ifndef S_IXGRP
# define S_IXGRP 0
#endif
/* path handling portability macros */
#ifndef DIR_SEPARATOR
# define DIR_SEPARATOR '/'
# define PATH_SEPARATOR ':'
#endif
#if defined _WIN32 || defined __MSDOS__ || defined __DJGPP__ || \
defined __OS2__
# define HAVE_DOS_BASED_FILE_SYSTEM
# define FOPEN_WB "wb"
# ifndef DIR_SEPARATOR_2
# define DIR_SEPARATOR_2 '\\'
# endif
# ifndef PATH_SEPARATOR_2
# define PATH_SEPARATOR_2 ';'
# endif
#endif
#ifndef DIR_SEPARATOR_2
# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
#else /* DIR_SEPARATOR_2 */
# define IS_DIR_SEPARATOR(ch) \
(((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
#endif /* DIR_SEPARATOR_2 */
#ifndef PATH_SEPARATOR_2
# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
#else /* PATH_SEPARATOR_2 */
# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
#endif /* PATH_SEPARATOR_2 */
#ifndef FOPEN_WB
# define FOPEN_WB "w"
#endif
#ifndef _O_BINARY
# define _O_BINARY 0
#endif
#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
#define XFREE(stale) do { \
if (stale) { free (stale); stale = 0; } \
} while (0)
#if defined LT_DEBUGWRAPPER
static int lt_debug = 1;
#else
static int lt_debug = 0;
#endif
const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */
void *xmalloc (size_t num);
char *xstrdup (const char *string);
const char *base_name (const char *name);
char *find_executable (const char *wrapper);
char *chase_symlinks (const char *pathspec);
int make_executable (const char *path);
int check_executable (const char *path);
char *strendzap (char *str, const char *pat);
void lt_debugprintf (const char *file, int line, const char *fmt, ...);
void lt_fatal (const char *file, int line, const char *message, ...);
static const char *nonnull (const char *s);
static const char *nonempty (const char *s);
void lt_setenv (const char *name, const char *value);
char *lt_extend_str (const char *orig_value, const char *add, int to_end);
void lt_update_exe_path (const char *name, const char *value);
void lt_update_lib_path (const char *name, const char *value);
char **prepare_spawn (char **argv);
void lt_dump_script (FILE *f);
EOF
cat <<EOF
#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 5)
# define externally_visible volatile
#else
# define externally_visible __attribute__((externally_visible)) volatile
#endif
externally_visible const char * MAGIC_EXE = "$magic_exe";
const char * LIB_PATH_VARNAME = "$shlibpath_var";
EOF
if test yes = "$shlibpath_overrides_runpath" && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
func_to_host_path "$temp_rpath"
cat <<EOF
const char * LIB_PATH_VALUE = "$func_to_host_path_result";
EOF
else
cat <<"EOF"
const char * LIB_PATH_VALUE = "";
EOF
fi
if test -n "$dllsearchpath"; then
func_to_host_path "$dllsearchpath:"
cat <<EOF
const char * EXE_PATH_VARNAME = "PATH";
const char * EXE_PATH_VALUE = "$func_to_host_path_result";
EOF
else
cat <<"EOF"
const char * EXE_PATH_VARNAME = "";
const char * EXE_PATH_VALUE = "";
EOF
fi
if test yes = "$fast_install"; then
cat <<EOF
const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
EOF
else
cat <<EOF
const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
EOF
fi
cat <<"EOF"
#define LTWRAPPER_OPTION_PREFIX "--lt-"
static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
static const char *dumpscript_opt = LTWRAPPER_OPTION_PREFIX "dump-script";
static const char *debug_opt = LTWRAPPER_OPTION_PREFIX "debug";
int
main (int argc, char *argv[])
{
char **newargz;
int newargc;
char *tmp_pathspec;
char *actual_cwrapper_path;
char *actual_cwrapper_name;
char *target_name;
char *lt_argv_zero;
int rval = 127;
int i;
program_name = (char *) xstrdup (base_name (argv[0]));
newargz = XMALLOC (char *, (size_t) argc + 1);
/* very simple arg parsing; don't want to rely on getopt
* also, copy all non cwrapper options to newargz, except
* argz[0], which is handled differently
*/
newargc=0;
for (i = 1; i < argc; i++)
{
if (STREQ (argv[i], dumpscript_opt))
{
EOF
case $host in
*mingw* | *cygwin* )
# make stdout use "unix" line endings
echo " setmode(1,_O_BINARY);"
;;
esac
cat <<"EOF"
lt_dump_script (stdout);
return 0;
}
if (STREQ (argv[i], debug_opt))
{
lt_debug = 1;
continue;
}
if (STREQ (argv[i], ltwrapper_option_prefix))
{
/* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
namespace, but it is not one of the ones we know about and
have already dealt with, above (inluding dump-script), then
report an error. Otherwise, targets might begin to believe
they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
namespace. The first time any user complains about this, we'll
need to make LTWRAPPER_OPTION_PREFIX a configure-time option
or a configure.ac-settable value.
*/
lt_fatal (__FILE__, __LINE__,
"unrecognized %s option: '%s'",
ltwrapper_option_prefix, argv[i]);
}
/* otherwise ... */
newargz[++newargc] = xstrdup (argv[i]);
}
newargz[++newargc] = NULL;
EOF
cat <<EOF
/* The GNU banner must be the first non-error debug message */
lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE) $VERSION\n");
EOF
cat <<"EOF"
lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name);
tmp_pathspec = find_executable (argv[0]);
if (tmp_pathspec == NULL)
lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]);
lt_debugprintf (__FILE__, __LINE__,
"(main) found exe (before symlink chase) at: %s\n",
tmp_pathspec);
actual_cwrapper_path = chase_symlinks (tmp_pathspec);
lt_debugprintf (__FILE__, __LINE__,
"(main) found exe (after symlink chase) at: %s\n",
actual_cwrapper_path);
XFREE (tmp_pathspec);
actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path));
strendzap (actual_cwrapper_path, actual_cwrapper_name);
/* wrapper name transforms */
strendzap (actual_cwrapper_name, ".exe");
tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
XFREE (actual_cwrapper_name);
actual_cwrapper_name = tmp_pathspec;
tmp_pathspec = 0;
/* target_name transforms -- use actual target program name; might have lt- prefix */
target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
strendzap (target_name, ".exe");
tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
XFREE (target_name);
target_name = tmp_pathspec;
tmp_pathspec = 0;
lt_debugprintf (__FILE__, __LINE__,
"(main) libtool target name: %s\n",
target_name);
EOF
cat <<EOF
newargz[0] =
XMALLOC (char, (strlen (actual_cwrapper_path) +
strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
strcpy (newargz[0], actual_cwrapper_path);
strcat (newargz[0], "$objdir");
strcat (newargz[0], "/");
EOF
cat <<"EOF"
/* stop here, and copy so we don't have to do this twice */
tmp_pathspec = xstrdup (newargz[0]);
/* do NOT want the lt- prefix here, so use actual_cwrapper_name */
strcat (newargz[0], actual_cwrapper_name);
/* DO want the lt- prefix here if it exists, so use target_name */
lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
XFREE (tmp_pathspec);
tmp_pathspec = NULL;
EOF
case $host_os in
mingw*)
cat <<"EOF"
{
char* p;
while ((p = strchr (newargz[0], '\\')) != NULL)
{
*p = '/';
}
while ((p = strchr (lt_argv_zero, '\\')) != NULL)
{
*p = '/';
}
}
EOF
;;
esac
cat <<"EOF"
XFREE (target_name);
XFREE (actual_cwrapper_path);
XFREE (actual_cwrapper_name);
lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
lt_setenv ("DUALCASE", "1"); /* for MSK sh */
/* Update the DLL searchpath. EXE_PATH_VALUE ($dllsearchpath) must
be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath)
because on Windows, both *_VARNAMEs are PATH but uninstalled
libraries must come first. */
lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n",
nonnull (lt_argv_zero));
for (i = 0; i < newargc; i++)
{
lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n",
i, nonnull (newargz[i]));
}
EOF
case $host_os in
mingw*)
cat <<"EOF"
/* execv doesn't actually work on mingw as expected on unix */
newargz = prepare_spawn (newargz);
rval = (int) _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
if (rval == -1)
{
/* failed to start process */
lt_debugprintf (__FILE__, __LINE__,
"(main) failed to launch target \"%s\": %s\n",
lt_argv_zero, nonnull (strerror (errno)));
return 127;
}
return rval;
EOF
;;
*)
cat <<"EOF"
execv (lt_argv_zero, newargz);
return rval; /* =127, but avoids unused variable warning */
EOF
;;
esac
cat <<"EOF"
}
void *
xmalloc (size_t num)
{
void *p = (void *) malloc (num);
if (!p)
lt_fatal (__FILE__, __LINE__, "memory exhausted");
return p;
}
char *
xstrdup (const char *string)
{
return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
string) : NULL;
}
const char *
base_name (const char *name)
{
const char *base;
#if defined HAVE_DOS_BASED_FILE_SYSTEM
/* Skip over the disk name in MSDOS pathnames. */
if (isalpha ((unsigned char) name[0]) && name[1] == ':')
name += 2;
#endif
for (base = name; *name; name++)
if (IS_DIR_SEPARATOR (*name))
base = name + 1;
return base;
}
int
check_executable (const char *path)
{
struct stat st;
lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n",
nonempty (path));
if ((!path) || (!*path))
return 0;
if ((stat (path, &st) >= 0)
&& (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
return 1;
else
return 0;
}
int
make_executable (const char *path)
{
int rval = 0;
struct stat st;
lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
nonempty (path));
if ((!path) || (!*path))
return 0;
if (stat (path, &st) >= 0)
{
rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
}
return rval;
}
/* Searches for the full path of the wrapper. Returns
newly allocated full path name if found, NULL otherwise
Does not chase symlinks, even on platforms that support them.
*/
char *
find_executable (const char *wrapper)
{
int has_slash = 0;
const char *p;
const char *p_next;
/* static buffer for getcwd */
char tmp[LT_PATHMAX + 1];
size_t tmp_len;
char *concat_name;
lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
nonempty (wrapper));
if ((wrapper == NULL) || (*wrapper == '\0'))
return NULL;
/* Absolute path? */
#if defined HAVE_DOS_BASED_FILE_SYSTEM
if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
{
concat_name = xstrdup (wrapper);
if (check_executable (concat_name))
return concat_name;
XFREE (concat_name);
}
else
{
#endif
if (IS_DIR_SEPARATOR (wrapper[0]))
{
concat_name = xstrdup (wrapper);
if (check_executable (concat_name))
return concat_name;
XFREE (concat_name);
}
#if defined HAVE_DOS_BASED_FILE_SYSTEM
}
#endif
for (p = wrapper; *p; p++)
if (*p == '/')
{
has_slash = 1;
break;
}
if (!has_slash)
{
/* no slashes; search PATH */
const char *path = getenv ("PATH");
if (path != NULL)
{
for (p = path; *p; p = p_next)
{
const char *q;
size_t p_len;
for (q = p; *q; q++)
if (IS_PATH_SEPARATOR (*q))
break;
p_len = (size_t) (q - p);
p_next = (*q == '\0' ? q : q + 1);
if (p_len == 0)
{
/* empty path: current directory */
if (getcwd (tmp, LT_PATHMAX) == NULL)
lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
nonnull (strerror (errno)));
tmp_len = strlen (tmp);
concat_name =
XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
memcpy (concat_name, tmp, tmp_len);
concat_name[tmp_len] = '/';
strcpy (concat_name + tmp_len + 1, wrapper);
}
else
{
concat_name =
XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
memcpy (concat_name, p, p_len);
concat_name[p_len] = '/';
strcpy (concat_name + p_len + 1, wrapper);
}
if (check_executable (concat_name))
return concat_name;
XFREE (concat_name);
}
}
/* not found in PATH; assume curdir */
}
/* Relative path | not found in path: prepend cwd */
if (getcwd (tmp, LT_PATHMAX) == NULL)
lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
nonnull (strerror (errno)));
tmp_len = strlen (tmp);
concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
memcpy (concat_name, tmp, tmp_len);
concat_name[tmp_len] = '/';
strcpy (concat_name + tmp_len + 1, wrapper);
if (check_executable (concat_name))
return concat_name;
XFREE (concat_name);
return NULL;
}
char *
chase_symlinks (const char *pathspec)
{
#ifndef S_ISLNK
return xstrdup (pathspec);
#else
char buf[LT_PATHMAX];
struct stat s;
char *tmp_pathspec = xstrdup (pathspec);
char *p;
int has_symlinks = 0;
while (strlen (tmp_pathspec) && !has_symlinks)
{
lt_debugprintf (__FILE__, __LINE__,
"checking path component for symlinks: %s\n",
tmp_pathspec);
if (lstat (tmp_pathspec, &s) == 0)
{
if (S_ISLNK (s.st_mode) != 0)
{
has_symlinks = 1;
break;
}
/* search backwards for last DIR_SEPARATOR */
p = tmp_pathspec + strlen (tmp_pathspec) - 1;
while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
p--;
if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
{
/* no more DIR_SEPARATORS left */
break;
}
*p = '\0';
}
else
{
lt_fatal (__FILE__, __LINE__,
"error accessing file \"%s\": %s",
tmp_pathspec, nonnull (strerror (errno)));
}
}
XFREE (tmp_pathspec);
if (!has_symlinks)
{
return xstrdup (pathspec);
}
tmp_pathspec = realpath (pathspec, buf);
if (tmp_pathspec == 0)
{
lt_fatal (__FILE__, __LINE__,
"could not follow symlinks for %s", pathspec);
}
return xstrdup (tmp_pathspec);
#endif
}
char *
strendzap (char *str, const char *pat)
{
size_t len, patlen;
assert (str != NULL);
assert (pat != NULL);
len = strlen (str);
patlen = strlen (pat);
if (patlen <= len)
{
str += len - patlen;
if (STREQ (str, pat))
*str = '\0';
}
return str;
}
void
lt_debugprintf (const char *file, int line, const char *fmt, ...)
{
va_list args;
if (lt_debug)
{
(void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
va_start (args, fmt);
(void) vfprintf (stderr, fmt, args);
va_end (args);
}
}
static void
lt_error_core (int exit_status, const char *file,
int line, const char *mode,
const char *message, va_list ap)
{
fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);
vfprintf (stderr, message, ap);
fprintf (stderr, ".\n");
if (exit_status >= 0)
exit (exit_status);
}
void
lt_fatal (const char *file, int line, const char *message, ...)
{
va_list ap;
va_start (ap, message);
lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);
va_end (ap);
}
static const char *
nonnull (const char *s)
{
return s ? s : "(null)";
}
static const char *
nonempty (const char *s)
{
return (s && !*s) ? "(empty)" : nonnull (s);
}
void
lt_setenv (const char *name, const char *value)
{
lt_debugprintf (__FILE__, __LINE__,
"(lt_setenv) setting '%s' to '%s'\n",
nonnull (name), nonnull (value));
{
#ifdef HAVE_SETENV
/* always make a copy, for consistency with !HAVE_SETENV */
char *str = xstrdup (value);
setenv (name, str, 1);
#else
size_t len = strlen (name) + 1 + strlen (value) + 1;
char *str = XMALLOC (char, len);
sprintf (str, "%s=%s", name, value);
if (putenv (str) != EXIT_SUCCESS)
{
XFREE (str);
}
#endif
}
}
char *
lt_extend_str (const char *orig_value, const char *add, int to_end)
{
char *new_value;
if (orig_value && *orig_value)
{
size_t orig_value_len = strlen (orig_value);
size_t add_len = strlen (add);
new_value = XMALLOC (char, add_len + orig_value_len + 1);
if (to_end)
{
strcpy (new_value, orig_value);
strcpy (new_value + orig_value_len, add);
}
else
{
strcpy (new_value, add);
strcpy (new_value + add_len, orig_value);
}
}
else
{
new_value = xstrdup (add);
}
return new_value;
}
void
lt_update_exe_path (const char *name, const char *value)
{
lt_debugprintf (__FILE__, __LINE__,
"(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
nonnull (name), nonnull (value));
if (name && *name && value && *value)
{
char *new_value = lt_extend_str (getenv (name), value, 0);
/* some systems can't cope with a ':'-terminated path #' */
size_t len = strlen (new_value);
while ((len > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
{
new_value[--len] = '\0';
}
lt_setenv (name, new_value);
XFREE (new_value);
}
}
void
lt_update_lib_path (const char *name, const char *value)
{
lt_debugprintf (__FILE__, __LINE__,
"(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
nonnull (name), nonnull (value));
if (name && *name && value && *value)
{
char *new_value = lt_extend_str (getenv (name), value, 0);
lt_setenv (name, new_value);
XFREE (new_value);
}
}
EOF
case $host_os in
mingw*)
cat <<"EOF"
/* Prepares an argument vector before calling spawn().
Note that spawn() does not by itself call the command interpreter
(getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") :
({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
GetVersionEx(&v);
v.dwPlatformId == VER_PLATFORM_WIN32_NT;
}) ? "cmd.exe" : "command.com").
Instead it simply concatenates the arguments, separated by ' ', and calls
CreateProcess(). We must quote the arguments since Win32 CreateProcess()
interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a
special way:
- Space and tab are interpreted as delimiters. They are not treated as
delimiters if they are surrounded by double quotes: "...".
- Unescaped double quotes are removed from the input. Their only effect is
that within double quotes, space and tab are treated like normal
characters.
- Backslashes not followed by double quotes are not special.
- But 2*n+1 backslashes followed by a double quote become
n backslashes followed by a double quote (n >= 0):
\" -> "
\\\" -> \"
\\\\\" -> \\"
*/
#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
char **
prepare_spawn (char **argv)
{
size_t argc;
char **new_argv;
size_t i;
/* Count number of arguments. */
for (argc = 0; argv[argc] != NULL; argc++)
;
/* Allocate new argument vector. */
new_argv = XMALLOC (char *, argc + 1);
/* Put quoted arguments into the new argument vector. */
for (i = 0; i < argc; i++)
{
const char *string = argv[i];
src/subversion/build/ltmain.sh view on Meta::CPAN
{
char c = *s;
if (c == '"')
{
unsigned int j;
for (j = backslashes + 1; j > 0; j--)
*p++ = '\\';
}
*p++ = c;
if (c == '\\')
backslashes++;
else
backslashes = 0;
}
if (quote_around)
{
unsigned int j;
for (j = backslashes; j > 0; j--)
*p++ = '\\';
*p++ = '"';
}
*p = '\0';
new_argv[i] = quoted_string;
}
else
new_argv[i] = (char *) string;
}
new_argv[argc] = NULL;
return new_argv;
}
EOF
;;
esac
cat <<"EOF"
void lt_dump_script (FILE* f)
{
EOF
func_emit_wrapper yes |
$SED -n -e '
s/^\(.\{79\}\)\(..*\)/\1\
\2/
h
s/\([\\"]\)/\\\1/g
s/$/\\n/
s/\([^\n]*\).*/ fputs ("\1", f);/p
g
D'
cat <<"EOF"
}
EOF
}
# end: func_emit_cwrapperexe_src
# func_win32_import_lib_p ARG
# True if ARG is an import lib, as indicated by $file_magic_cmd
func_win32_import_lib_p ()
{
$debug_cmd
case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
*import*) : ;;
*) false ;;
esac
}
# func_mode_link arg...
func_mode_link ()
{
$debug_cmd
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
# It is impossible to link a dll without this setting, and
# we shouldn't force the makefile maintainer to figure out
# what system we are compiling for in order to pass an extra
# flag for every libtool invocation.
# allow_undefined=no
# FIXME: Unfortunately, there are problems with the above when trying
# to make a dll that has undefined symbols, in which case not
# even a static library is built. For now, we need to specify
# -no-undefined on the libtool link line when we can be certain
# that all symbols are satisfied, otherwise we get a static library.
allow_undefined=yes
;;
*)
allow_undefined=yes
;;
esac
libtool_args=$nonopt
base_compile="$nonopt $@"
compile_command=$nonopt
finalize_command=$nonopt
compile_rpath=
finalize_rpath=
compile_shlibpath=
finalize_shlibpath=
convenience=
old_convenience=
deplibs=
old_deplibs=
compiler_flags=
linker_flags=
dllsearchpath=
lib_search_path=`pwd`
inst_prefix_dir=
new_inherited_linker_flags=
avoid_version=no
bindir=
dlfiles=
dlprefiles=
dlself=no
export_dynamic=no
export_symbols=
export_symbols_regex=
generated=
libobjs=
ltlibs=
module=no
no_install=no
objs=
non_pic_objects=
precious_files_regex=
prefer_static_libs=no
preload=false
prev=
prevarg=
src/subversion/build/ltmain.sh view on Meta::CPAN
# It is necessary for linking the library.
# The name that we can dlopen(3).
dlname='$tdlname'
# Names of this library.
library_names='$library_names'
# The name of the static archive.
old_library='$old_library'
# Linker flags that cannot go in dependency_libs.
inherited_linker_flags='$new_inherited_linker_flags'
# Libraries that this one depends upon.
dependency_libs='$dependency_libs'
# Names of additional weak libraries provided by this library
weak_library_names='$weak_libs'
# Version information for $libname.
current=$current
age=$age
revision=$revision
# Is this an already installed library?
installed=$installed
# Should we warn about portability when linking against -modules?
shouldnotlink=$module
# Files to dlopen/dlpreopen
dlopen='$dlfiles'
dlpreopen='$dlprefiles'
# Directory that this library needs to be installed in:
libdir='$install_libdir'"
if test no,yes = "$installed,$need_relink"; then
$ECHO >> $output "\
relink_command=\"$relink_command\""
fi
done
}
# Do a symbolic link so that the libtool archive can be found in
# LD_LIBRARY_PATH before the program is installed.
func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
;;
esac
exit $EXIT_SUCCESS
}
if test link = "$opt_mode" || test relink = "$opt_mode"; then
func_mode_link ${1+"$@"}
fi
# func_mode_uninstall arg...
func_mode_uninstall ()
{
$debug_cmd
RM=$nonopt
files=
rmforce=false
exit_status=0
# This variable tells wrapper scripts just to set variables rather
# than running their programs.
libtool_install_magic=$magic
for arg
do
case $arg in
-f) func_append RM " $arg"; rmforce=: ;;
-*) func_append RM " $arg" ;;
*) func_append files " $arg" ;;
esac
done
test -z "$RM" && \
func_fatal_help "you must specify an RM program"
rmdirs=
for file in $files; do
func_dirname "$file" "" "."
dir=$func_dirname_result
if test . = "$dir"; then
odir=$objdir
else
odir=$dir/$objdir
fi
func_basename "$file"
name=$func_basename_result
test uninstall = "$opt_mode" && odir=$dir
# Remember odir for removal later, being careful to avoid duplicates
if test clean = "$opt_mode"; then
case " $rmdirs " in
*" $odir "*) ;;
*) func_append rmdirs " $odir" ;;
esac
fi
# Don't error if the file doesn't exist and rm -f was used.
if { test -L "$file"; } >/dev/null 2>&1 ||
{ test -h "$file"; } >/dev/null 2>&1 ||
test -f "$file"; then
:
elif test -d "$file"; then
exit_status=1
continue
elif $rmforce; then
continue
fi
rmfiles=$file
case $name in
*.la)
( run in 0.657 second using v1.01-cache-2.11-cpan-02777c243ea )