bind results from the CPAN

ASNMTAP

#
# SNMPTT v1.2 Configuration File
#
# Linux / Unix
#

[General]
# Name of this system for $H variable.  If blank, system name will be the computer's
# hostname via Sys::Hostname.
snmptt_system_name = 

# Set to either 'standalone' or 'daemon'
# standalone: snmptt called from snmptrapd.conf
# daemon: snmptrapd.conf calls snmptthandler
# Ignored by Windows.  See documentation
mode = daemon

# Set to 1 to allow multiple trap definitions to be executed for the same trap.
# Set to 0 to have it stop after the first match.
# This option should normally be set to 1.  See the section 'SNMPTT.CONF Configuration 
# file Notes' in the SNMPTT documentation for more information.
# Note: Wildcard matches are only matched if there are NO exact matches.  This takes
# 	into consideration the NODES list.  Therefore, if there is a matching trap, but
#	the NODES list prevents it from being considered a match, the wildcard entry will
#	only be used if there are no other exact matches.
multiple_event = 1

# SNMPTRAPD passes the IP address of device sending the trap, and the IP address of the
# actual SNMP agent.  These addresses could differ if the trap was sent on behalf of another
# device (relay, proxy etc).
# If DNS is enabled, the agent IP address is converted to a host name using a DNS lookup
# (which includes the local hosts file, depending on how the OS is configured).  This name
# will be used for: NODES entry matches, hostname field in logged traps (file / database), 
# and the $A variable.  Host names on the NODES line will be resolved and the IP address 
# will then be used for comparing.
# Set to 0 to disable DNS resolution
# Set to 1 to enable DNS resolution
dns_enable = 1

# Set to 0 to enable the use of FQDN (Fully Qualified Domain Names).  If a host name is
# passed to SNMPTT that contains a domain name, it will not be altered in any way by
# SNMPTT.  This also affects resolve_value_ip_addresses.
# Set to 1 to have SNMPTT strip the domain name from the host name passed to it.  For 
# example, server01.domain.com would be changed to server01
# Set to 2 to have SNMPTT strip the domain name from the host name passed to it
# based on the list of domains in strip_domain_list
strip_domain = 1

# List of domain names that should be stripped when strip_domain is set to 2.
# List can contain one or more domains.  For example, if the FQDN of a host is
# server01.city.domain.com and the list contains domain.com, the 'host' will be
# set as server01.city.
strip_domain_list = <<END
.citap.com
.citap.be
END

# Configures how IP addresses contained in the VALUE of the variable bindings are handled.
# This only applies to the values for $n, $+n, $-n, $vn, $+*, $-*.
# Set to 0 to disable resolving ip address to host names
# Set to 1 to enable resolving ip address to host names
# Note: net_snmp_perl_enable *must* be enabled.  The strip_domain settings influence the
# format of the resolved host name.  DNS must be enabled (dns_enable)
resolve_value_ip_addresses = 1

# Set to 1 to enable the use of the Perl module from the UCD-SNMP / NET-SNMP package.
# This is required for $v variable substitution to work, and also for some other options
# that are enabled in this .ini file.
# Set to 0 to disable the use of the Perl module from the UCD-SNMP / NET-SNMP package.
# Note: Enabling this with stand-alone mode can cause SNMPTT to run very slowly due to
#       the loading of the MIBS at startup.
net_snmp_perl_enable = 1

# This sets the best_guess parameter used by the UCD-SNMP / NET-SNMP Perl module for 
# translating symbolic nams to OIDs and vice versa.
# For UCD-SNMP, and Net-SNMP 5.0.8 and previous versions, set this value to 0.
# For Net-SNMP 5.0.9, or any Net-SNMP with patch 722075 applied, set this value to 2.
# A value of 2 is equivalent to -IR on Net-SNMP command line utilities.
# UCD-SNMP and Net-SNMP 5.0.8 and previous may not be able to translate certain formats of
# symbolic names such as RFC1213-MIB::sysDescr.  Net-SNMP 5.0.9 or patch 722075 will allow
# all possibilities to be translated.  See the FAQ section in the README for more info
net_snmp_perl_best_guess = 1

# Configures how the OID of the received trap is handled when outputting to a log file /
# database.  It does NOT apply to the $O variable.
# Set to 0 to use the default of numerical OID
# Set to 1 to translate the trap OID to short text (symbolic form) (eg: linkUp)
# Set to 2 to translate the trap OID to short text with module name (eg: IF-MIB::linkUp)
# Set to 3 to translate the trap OID to long text (eg: iso...snmpTraps.linkUp)
# Set to 4 to translate the trap OID to long text with module name (eg: 
# IF-MIB::iso...snmpTraps.linkUp)
# Note: -The output of the long format will vary depending on the version of Net-SNMP you
#        are using.
#       -net_snmp_perl_enable *must* be enabled
#       -If using database logging, ensure the trapoid column is large enough to hold the
#        entire line
translate_log_trap_oid = 2

# Configures how OIDs contained in the VALUE of the variable bindings are handled.
# This only applies to the values for $n, $+n, $-n, $vn, $+*, $-*.  For substitutions
# that include variable NAMES ($+n etc), only the variable VALUE is affected.
# Set to 0 to disable translating OID values to text (symbolic form)
# Set to 1 to translate OID values to short text (symbolic form) (eg: BuildingAlarm)
# Set to 2 to translate OID values to short text with module name (eg: UPS-MIB::BuildingAlarm)
# Set to 3 to translate OID values to long text (eg: iso...upsAlarm.BuildingAlarm)
# Set to 4 to translate OID values to long text with module name (eg: 
# UPS-MIB::iso...upsAlarm.BuildingAlarm)
# For example, if the value contained: 'A UPS Alarm (.1.3.6.1.4.1.534.1.7.12) has cleared.',
# it could be translated to: 'A UPS Alarm (UPS-MIB::BuildingAlarm) has cleared.'
# Note: net_snmp_perl_enable *must* be enabled
translate_value_oids = 2

# Configures how the symbolic enterprise OID will be displayed for $E.
# Set to 1, 2, 3 or 4.  See translate_value_oids options 1,2,3 and 4. 
# Note: net_snmp_perl_enable *must* be enabled
translate_enterprise_oid_format = 2

# Configures how the symbolic trap OID will be displayed for $O.
# Set to 1, 2, 3 or 4.  See translate_value_oids options 1,2,3 and 4. 
# Note: net_snmp_perl_enable *must* be enabled
translate_trap_oid_format = 2

# Configures how the symbolic trap OID will be displayed for $v, $-n, $+n, $-* and $+*.
# Set to 1, 2, 3 or 4.  See translate_value_oids options 1,2,3 and 4. 
# Note: net_snmp_perl_enable *must* be enabled
translate_varname_oid_format = 2

# Set to 0 to disable converting INTEGER values to enumeration tags as defined in the 
# MIB files
# Set to 1 to enable converting INTEGER values to enumeration tags as defined in the 
# MIB files
# Example: moverDoorState:open instead of moverDoorState:2
# Note: net_snmp_perl_enable *must* be enabled
translate_integers = 1

# Allows you to set the MIBS environment variable used by SNMPTT
# Leave blank or comment out to have the systems enviroment settings used
# To have all MIBS processed, set to ALL
# See the snmp.conf manual page for more info
#mibs_environment = ALL

# Set what is used to separate variables when wildcards are expanded on the FORMAT /
# EXEC line.  Defaults to a space.  Value MUST be within quotes.  Can contain 1 or 
# more characters
wildcard_expansion_separator = " "

# Set to 1 to allow unsafe REGEX code to be executed.
# Set to 0 to prevent unsafe REGEX code from being executed (default).
# Enabling unsafe REGEX code will allow variable interopolation and the use of the e
# modifier to allow statements such as substitution with captures such
# as:            (one (two) three)(five $1 six)
# which outputs: five two six
# or:            (one (two) three)("five ".length($1)." six")e
# which outputs: five 3 six
#
# This is considered unsafe because the contents of the regular expression 
# (right) is executed (eval) by Perl which *could contain unsafe code*.
# BE SURE THAT THE SNMPTT CONFIGURATION FILES ARE SECURE!
allow_unsafe_regex = 0

plugins/templates/snmptt/snmptt.ini view on Meta::CPAN

# module then disable this.  Windows users should disable this.
syslog_enable = 0

# Syslog facility to use for logging of *TRAPS*.  For example: 'local0'
syslog_facility = local0

# Set the syslog level for *TRAPS* based on the severity level of the trap
# as defined in the snmptt.conf file.  Values must be one per line between 
# the syslog_level_* and END lines, and are not case sensitive.  For example:
#   Warning
#   Critical
# Duplicate definitions will use the definition with the higher severity.
syslog_level_debug = <<END
END
syslog_level_info = <<END
END
syslog_level_notice = <<END
END
syslog_level_warning = <<END
END
syslog_level_err = <<END
END
syslog_level_crit = <<END
END
syslog_level_alert = <<END
END

# Syslog default level to use for logging of *TRAPS*.  For example: warning
# Valid values: emerg, alert, crit, err, warning, notice, info, debug 
syslog_level = warning

# Set to 1 to enable logging of *SNMPTT system errors* to syslog.  If you do not have the 
# Sys::Syslog module then disable this.  Windows users should disable this.
syslog_system_enable = 0

# Syslog facility to use for logging of *SNMPTT system errors*.  For example: 'local0'
syslog_system_facility = local0

# Syslog level to use for logging of *SNMPTT system errors*..  For example: 'warning'
# Valid values: emerg, alert, crit, err, warning, notice, info, debug 
syslog_system_level = warning

[SQL]
# Determines if the enterprise column contains the numeric OID or symbolic OID
# Set to 0 for numeric OID
# Set to 1 for symbolic OID
# Uses translate_enterprise_oid_format to determine format
# Note: net_snmp_perl_enable *must* be enabled
db_translate_enterprise = 0

# FORMAT line to use for unknown traps.  If not defined, defaults to $-*.
db_unknown_trap_format = '$-*'

# List of custom SQL column names and values for the table of received traps
# (defined by *_table below).  The format is
#   column name
#   value
#
# For example:
#
#   binding_count
#   $#
#   uptime2
#   The agent has been up for $T.
sql_custom_columns = <<END
system_running_SNMPTT
$H
END

# List of custom SQL column names and values for the table of unknown traps
# (defined by *_table_unknown below).  See sql_custom_columns for the format.
sql_custom_columns_unknown = <<END
system_running_SNMPTT
$H
END

# MySQL: Set to 1 to enable logging to a MySQL database via DBI (Linux / Windows)
# This requires DBI:: and DBD::mysql
mysql_dbi_enable = 1

# MySQL: Hostname of database server (optional - default localhost)
mysql_dbi_host = dtbs.citap.be

# MySQL: Port number of database server (optional - default 3306)
mysql_dbi_port = 3306

# MySQL: Database to use
mysql_dbi_database = snmptt

# MySQL: Table to use
mysql_dbi_table = snmptt

# MySQL: Table to use for unknown traps
# Leave blank to disable logging of unknown traps to MySQL
# Note: unknown_trap_log_enable must be enabled.
mysql_dbi_table_unknown = snmptt_unknown

# MySQL: Table to use for statistics
# Note: statistics_interval must be set.  See also stat_time_format_sql.
mysql_dbi_table_statistics = snmptt_statistics
#mysql_dbi_table_statistics = 

# MySQL: Username to use
mysql_dbi_username = asnmtap

# MySQL: Password to use
mysql_dbi_password = asnmtap

# MySQL: Whether or not to 'ping' the database before attempting an INSERT
# to ensure the connection is still valid.  If *any* error is generate by 
# the ping such as 'Unable to connect to database', it will attempt to 
# re-create the database connection.
# Set to 0 to disable
# Set to 1 to enable
# Note:  This has no effect on mysql_ping_interval.
mysql_ping_on_insert = 1

# MySQL: How often in seconds the database should be 'pinged' to ensure the
# connection is still valid.  If *any* error is generate by the ping such as 
# 'Unable to connect to database', it will attempt to re-create the database
# connection.  Set to 0 to disable pinging.

( run in 1.314 second using v1.01-cache-2.11-cpan-437f7b0c052 )