SVK

 view release on metacpan or  search on metacpan

lib/SVK/I18N/zh_cn.po  view on Meta::CPAN

#: lib/SVK/Command.pod:323
msgid "-m [--merge]: smerge from copied sources before update"
msgstr "-m [--merge]: 在更新之前，先从复制来源执行 smerge"

#: lib/SVK/Command.pod:324
msgid "-m [--message] MESSAGE: specify commit message MESSAGE"
msgstr "-m [--message] MESSAGE: 指定送交更动的描述"

#: lib/SVK/Command/Merge.pm:200
msgid "-m ignored in incremental merge\n"
msgstr "渐进式合并；已忽略 -m 选项\n"

#: lib/SVK/Command.pod:325
msgid "-p [--parent]: create intermediate directories as required"
msgstr "-p [--parent]: 依需要而建立中间的目录"

#: lib/SVK/Command.pod:326
msgid "-q [--quiet]: Don't display the actual log message itself"
msgstr "-q [--quiet]: 不要显示实际的更动纪录"

#: lib/SVK/Command.pod:327
msgid "-q [--quiet]: do not display changed nodes"
msgstr "-q [--quiet]: 不要显示更动的项目"

#: lib/SVK/Command.pod:328
msgid "-q [--quiet]: do not display files not under version control"
msgstr "-q [--quiet]: 不要显示未加入版本控制的项目"

#: lib/SVK/Command.pod:329
msgid "-q [--quiet]: print as little as possible"
msgstr ""

#: lib/SVK/Command.pod:330
msgid "-q [--quiet]: quiet mode"
msgstr "-q [--quiet]: 极简输出"

#: lib/SVK/Command.pod:331
msgid "-r [--revision] ARG: ARG (some commands also take ARG1:ARG2 range)"
msgstr ""

#: lib/SVK/Command.pod:332
msgid "-r [--revision] N:M: act on revisions between N and M"
msgstr "-r [--revision] N:M: 指定要处理的更动编号范围"

#: lib/SVK/Command.pod:333
msgid "-r [--revision] REV: act on revision REV instead of the head revision"
msgstr "-r [--revision] REV: 指定要处理的更动编号；预设为最新版本"

#: lib/SVK/Command.pod:334
msgid "-r [--revision] REV: annotate up to revision"
msgstr "-r [--revision] REV: 指定要处理的更动编号范围"

#: lib/SVK/Command.pod:335
msgid "-r [--revision] arg: ARG (some commands also take ARG1:ARG2 range)"
msgstr ""

#: lib/SVK/Command.pod:336
msgid "-r [--revision] arg: act on revision ARG instead of the head revision"
msgstr "-r [--revision] arg: 指定要处理的更动编号；预设为最新版本"

#: lib/SVK/Command/Propedit.pm:74 lib/SVK/Command/Propset.pm:139
msgid "-r not allowed for propset copath.\n"
msgstr ""

#: lib/SVK/Command.pod:337
msgid "-s [--skipto] REV: start synchronization at revision REV"
msgstr "-s [--skipto] REV: 指定开始同步的更动编号"

#: lib/SVK/Command.pod:338
msgid "-s [--summarize]: show summary only"
msgstr "-s [--summarize]: 仅显示摘要信息"

#: lib/SVK/Command.pod:339
msgid "-s [--sync]: synchronize mirrored sources before operation"
msgstr "-s [--sync]: 在操作前，先同步化来源映像路径"

#: lib/SVK/Command.pod:340
msgid "-s [--sync]: synchronize mirrored sources before update"
msgstr "-s [--sync]: 在更新前，先同步化来源映像路径"

#: lib/SVK/Command.pod:341
msgid "-t [--to-checkout]: turn the source into a checkout path"
msgstr "-t [--to-checkout]: 将汇入来源设为取出路径"

#: lib/SVK/Command.pod:342
msgid "-t [--to]: merge to the specified path"
msgstr "-t [--to]: 从指定路径的复制来源，合并到指定的路径"

#: lib/SVK/Command.pod:343
msgid "-t [--torev] REV: stop synchronization at revision REV"
msgstr "-t [--torev] REV: 指定结束同步的更动编号"

#: lib/SVK/Command.pod:344
msgid "-v [--verbose]: print extra information"
msgstr "-v [--verbose]: 印出额外的信息"

#: lib/SVK/Command.pod:345
msgid "-v [--verbose]: print full revision information on every item"
msgstr "-v [--verbose]: 为每个项目印出完整的版本信息"

#: lib/SVK/Command.pod:346
msgid "-x [--cross]: track revisions copied from elsewhere"
msgstr "-x [--cross]: 追踪从别处复制来的版本"

#: lib/SVK/Command.pod:347
msgid "/depotname/path/inside/repos"
msgstr "/档案库名称/内部的/路径"

#: lib/SVK/Command.pod:348
msgid "53       20 sally        wc"
msgstr ""

#: lib/SVK/Command.pod:349
msgid "53       43 harry        wc/zig.c"
msgstr ""

#: lib/SVK/Command.pod:350
msgid "53       51 harry        wc/foo.c"
msgstr ""

# as-is
#: lib/SVK/Command/Commit.pm:104

lib/SVK/I18N/zh_cn.po  view on Meta::CPAN

msgstr "无法建立取出路径 %1：%2。\n"

#. ($copath)
#: lib/SVK/Command/Revert.pm:129
msgid "Can't create directory while trying to revert %1.\n"
msgstr "尝试回复 %1 时，无法建立路径。\n"

#. ($copath)
#: lib/SVK/Command/Revert.pm:136
msgid "Can't create file while trying to revert %1.\n"
msgstr "尝试回复 %1 时，无法建立档案。\n"

#. ($_[1], $enc->name)
#: lib/SVK/Util.pm:370
msgid "Can't decode %1 as %2.\n"
msgstr "无法将 %1 作为 %2 来译码。\n"

#. ($_[1], $enc->name)
#: lib/SVK/Util.pm:384
msgid "Can't encode %1 as %2.\n"
msgstr "无法将 %1 作为 %2 来编码。\n"

#. ($rrev, $target->path)
#: lib/SVK/Command.pm:1189
msgid "Can't find local revision for %1 on %2.\n"
msgstr "无法在 %2 内找到 %1 的本地版本。\n"

#. ($src->path, $dst->path)
#: lib/SVK/Merge.pm:259
msgid "Can't find merge base for %1 and %2\n"
msgstr "无法找到 %1 和 %2 的合并源头\n"

#. ($src->path)
#: lib/SVK/Merge.pm:612
msgid "Can't find the first revision of %1.\n"
msgstr "找不到 %1 的第一项更动。\n"

#: lib/SVK/Log/FilterPipeline.pm:144
msgid "Can't load log filter '$class'.\n"
msgstr ""

#. (
#. ("$self->{statefile}.backup")
#: lib/SVK/.XD.pm.swp:18 lib/SVK/XD.pm:213
msgid "Can't load statefile, old statefile saved as %1"
msgstr "无法加载状态档；旧版状态档已存为 %1"

#: lib/SVK/Command/Merge.pm:86
msgid "Can't merge across depots.\n"
msgstr "无法跨档案库进行合并。\n"

#: lib/SVK/Command/Merge.pm:159
msgid "Can't merge with specified revisions with smart merge.\n"
msgstr ""

#. ($self->source_path, $source_path)
#: lib/SVK/Mirror/Backend/SVNRa.pm:241
msgid "Can't relocate: mirror subdirectory changed from %1 to %2.\n"
msgstr "无法重新指向：映像路径已从 %1 改为 %2。\n"

#: lib/SVK/Command/Propset.pm:166
msgid "Can't set svn:eol-style on depotpath.\n"
msgstr "无法设定档案库路径的 svn:eol-style 属性。\n"

#: lib/SVK/Command/Commit.pm:115
msgid "Can't use -F with -m.\n"
msgstr "无法同时指定 -F 及 -m。\n"

#: lib/SVK/Command/Commit.pm:266
msgid "Can't use set-revprop with remote repository.\n"
msgstr ""

#. ($copath, $!)
#: lib/SVK/Command/Checkout.pm:140
msgid "Cannot create checkout directory at '%1': %2\n"
msgstr "无法于‘%1’建立取出目录：%2\n"

#. (
#. ($self->{svkpath}, $!)
#: lib/SVK/.XD.pm.swp:17 lib/SVK/XD.pm:176
msgid "Cannot create svk-config-directory at '%1': %2\n"
msgstr "无法于‘%1’建立 SVK 的设定目录：%2\n"

#: lib/SVK/Editor/Diff.pm:187
msgid "Cannot display: file marked as a binary type.\n"
msgstr "无法显示二进制档案的差异。\n"

#. ($file)
#: lib/SVK/Patch.pm:144
msgid "Cannot find a patch block in %1.\n"
msgstr "在 %1 里找不到补缀区段。\n"

#. ($topic)
#: lib/SVK/Command/Help.pm:97
msgid "Cannot find help topic '%1'.\n"
msgstr "找不到说明主题‘%1’。\n"

#: lib/SVK/Util.pm:310
msgid "Cannot find separator; aborted.\n"
msgstr "找不到分隔线，放弃编辑。\n"

#. ($arg[0] || '')
#: lib/SVK/Command/Merge.pm:115
msgid "Cannot find the path which '%1' copied from.\n"
msgstr "找不到 %1 的复制源头。\n"

#. ($!)
#: lib/SVK/Resolve/Emacs.pm:107
msgid "Cannot fork: %1"
msgstr "无法分岔程序： %1"

#. ($path)
#: lib/SVK/Resolve.pm:176
msgid "Cannot launch an external merge tool for %1."
msgstr "无法激活外部合并工具来编辑 %1。"

#. (catfile($source)
#: lib/SVK/Util.pm:841
msgid "Cannot rename %1 to %2; please move it manually."
msgstr "无法将 %1 改名为 %2；请自行移动此路径。"

lib/SVK/I18N/zh_cn.po  view on Meta::CPAN

#. ($copath, $target->depotpath, $yrev)
#: lib/SVK/Command/Import.pm:144
msgid "Directory %1 imported to depotpath %2 as revision %3.\n"
msgstr "目录 %1 已汇入档案库路径 %2，更动编号为 %3。\n"

#. ($copath, $target->depotpath)
#: lib/SVK/Command/Import.pm:175
msgid "Directory %1 will be imported to depotpath %2.\n"
msgstr "目录 %1 即将汇入档案库路径 %2。\n"

#. ($self->{path})
#: lib/SVK/Editor/InteractiveStatus.pm:963
msgid "Directory '%1' is marked for addition"
msgstr ""

#. ($arg[0])
#: lib/SVK/Command/Checkout.pm:232
msgid "Do you mean svk switch %1?\n"
msgstr "你是要 svk 变更 %1 吗？\n"

#: lib/SVK/Command.pod:370
msgid "EDITOR: Editor to use for 'e'."
msgstr "EDITOR: 要在 'e' 时采用的编辑器。"

#: lib/SVK/Command.pod:371
msgid "Edit:"
msgstr "编辑："

#: lib/SVK/Command.pod:372
msgid "Emacs"
msgstr ""

#: lib/SVK/Resolve/Emacs.pm:101
msgid "Emerge %1 done."
msgstr "Emerge %1 执行完毕。"

#: lib/SVK/Editor/Merge.pm:1013
msgid "Empty merge."
msgstr "合并后无任何更动。"

#: lib/SVK/Command/Merge.pm:190
msgid "Empty merge.\n"
msgstr "合并后无任何更动。\n"

#. (loc($action)
#: lib/SVK/Command.pm:1037
msgid "Enter a depot path to %1 into (under // if no leading '/'): "
msgstr "要%1到的档案库路径名称（若不以‘/’开头，则置于 // 之下）："

#. (loc($action)
#: lib/SVK/Command.pm:1032
msgid "Enter a depot path to %1 into: [%2] "
msgstr "要%1到的档案库路径名称：[%2]"

#: lib/SVK/Command.pod:373
msgid "Environment variables:"
msgstr "环境变数："

#. ($target->report)
#: lib/SVK/Command/Propset.pm:150
msgid "File %1 has inconsistent newlines.\n"
msgstr "档案 %1 有不一致的换行符号。\n"

#. ($self->{path})
#: lib/SVK/Editor/InteractiveStatus.pm:531
msgid "File '%1' is marked for addition"
msgstr ""

#. ($self->{path})
#: lib/SVK/Editor/InteractiveStatus.pm:836
msgid "File or directory '%1' is marked for deletion"
msgstr ""

#: lib/SVK/Command.pod:374
msgid "FileMerge"
msgstr ""

#: lib/SVK/Command/Patch.pm:119
msgid "Filename required.\n"
msgstr "需要指定档名。\n"

#: lib/SVK/Command.pod:375
msgid "First, you'll need to mirror a remote repository. This sets up a"
msgstr ""

#. ($rev, $rrev)
#: lib/SVK/Command/Mirror.pm:260
msgid "Found merge ticket at revision %1 (remote %2); use it? (y/n) "
msgstr "在更动编号 %1 发现了合并历史纪录（远程为 %2）；要采用吗？(y/n) "

#: lib/SVK/Command.pod:376
msgid "G  Merged"
msgstr "G  合并"

#: lib/SVK/Command.pod:377
msgid "GETTING"
msgstr ""

#: lib/SVK/Command.pod:378
msgid "GVim"
msgstr ""

#: lib/SVK/Command.pod:379
msgid "Given negative NUMBER means \"HEAD\"+NUMBER."
msgstr ""

#. ($search)
#: lib/SVK/Log/Filter/Grep.pm:62
msgid "Grep: Invalid regular expression '%1'.\n"
msgstr ""

#: lib/SVK/Command.pod:380
msgid "GtkDiff"
msgstr ""

#: lib/SVK/Command.pod:381
msgid "Guard. By default, svk tries to run the first program called gpg in"
msgstr ""

#: lib/SVK/Command.pod:382

lib/SVK/I18N/zh_cn.po  view on Meta::CPAN

#: lib/SVK/Command/Copy.pm:125 lib/SVK/Command/Copy.pm:236
msgid "Path %1 already exists.\n"
msgstr "路径 %1 已存在。\n"

#. ($src->path_anchor)
#. ($copath)
#. ($target->depotpath)
#. ($target->report)
#. ($update_target->depotpath)
#: lib/SVK/Command/Copy.pm:122 lib/SVK/Command/Import.pm:112
#: lib/SVK/Command/Info.pm:91 lib/SVK/Command/Switch.pm:90
#: lib/SVK/Command/Update.pm:155
msgid "Path %1 does not exist.\n"
msgstr "路径 %1 不存在。\n"

#. ($dst->report)
#: lib/SVK/Command/Mkdir.pm:78
msgid "Path %1 is not a checkout path.\n"
msgstr "路径 %1 不是已取出的路径。\n"

#. ($target->path_anchor)
#: lib/SVK/Command/List.pm:91
msgid "Path %1 is not versioned.\n"
msgstr "路径 %1 并未纳入版本控制。\n"

#. ($update_target->depotpath)
#: lib/SVK/Command/Update.pm:164
msgid "Path %1 no longer exists.\n"
msgstr "路径 %1 已不存在。\n"

#. ($_->copath_anchor)
#: lib/SVK/Command/Cleanup.pm:84
msgid "Path %1 was not locked.\n"
msgstr "未锁定路径 %1。\n"

#. ($parent)
#: lib/SVK/Command/Add.pm:83
msgid "Please add the parent directory '%1' first.\n"
msgstr "请先加入上层目录‘%1’。\n"

#: lib/SVK/Command/Patch.pm:156
msgid "Please do a merge to resolve conflicts and regen the patch."
msgstr "请执行合并以解决冲突，之后再用 regen 重建这份补缀。"

#: lib/SVK/.XD.pm.swp:25 lib/SVK/XD.pm:276
msgid ""
"Please hold on a moment. SVK is writing out a critical configuration file."
msgstr ""

#. (length $target->report ? $target->report : '.')
#: lib/SVK/Command/Proplist.pm:111
msgid "Properties on %1:\n"
msgstr "%1 的属性列表：\n"

#. ($propname, $path)
#: lib/SVK/Editor/Merge.pm:939
msgid "Property %1 of %2"
msgstr "%2 的 %1 属性"

#. ($propname, $rev)
#: lib/SVK/Command/Propset.pm:96
msgid "Property '%1' deleted from repository revision %2."
msgstr "已删除更动编号 %2 的属性‘%1’。"

#. ($propname, $rev)
#: lib/SVK/Command/Propset.pm:93
msgid "Property '%1' set on repository revision %2."
msgstr "已设定更动编号 %2 的属性‘%1’。"

#. ($path)
#: lib/SVK/Editor/InteractiveStatus.pm:1015
msgid "Property change on '%1' directory requested"
msgstr "已要求目录‘%1’的属性更动"

#. ($self->{path})
#: lib/SVK/Editor/InteractiveStatus.pm:901
msgid "Property change on '%1' file requested"
msgstr "已要求档案‘%1’的属性更动"

#. ($rpath)
#: lib/SVK/Editor/Diff.pm:325
msgid "Property changes on: %1\n"
msgstr "%1 的属性更动：\n"

#. ($depotpath, $path)
#: lib/SVK/Command/Checkout.pm:342
msgid "Purge checkout of %1 to non-existing directory %2? (y/n) "
msgstr ""

#. ($path)
#: lib/SVK/.XD.pm.swp:25 lib/SVK/XD.pm:241
msgid "Repository %1 does not exist, create? (y/n)"
msgstr "档案库 %1 不存在。要建立吗？(y/n)"

#: lib/SVK/Mirror/Backend/SVNSync.pm:80
msgid "Requires newer svn for replay support when mirroring to /.\n"
msgstr ""

#. ($rev, $skipped)
#: lib/SVK/Command/Mirror.pm:278
msgid "Revert to revision %1 and discard %*(%2,revision)? (y/n) "
msgstr "确定要回复到更动编号 %1，并取消 %2 份之后的更动？(y/n) "

#. ($target->report_copath ($copath)
#: lib/SVK/Command/Revert.pm:152
msgid "Reverted %1"
msgstr "已复原 %1"

#: lib/SVK/Command.pm:753 lib/SVK/Command/Diff.pm:115
#: lib/SVK/Command/Proplist.pm:76
msgid "Revision required.\n"
msgstr "需要指定更动编号。\n"

#: lib/SVK/Command.pm:766
msgid "Revision spec must be N:M.\n"
msgstr "更动编号的格式必需为 N:M。\n"

#. ($target->revision)
#: lib/SVK/Command/Log.pm:134
msgid "Revision too large, show log from %1."
msgstr "更动编号太大，改从 %1 开始显示纪录。"

#. ($target->revision)
#: lib/SVK/Command/Info.pm:98
msgid "Revision: %1\n"
msgstr "更动编号：%1\n"

lib/SVK/I18N/zh_cn.po  view on Meta::CPAN

msgstr "未指定档案库"

#. ($orig_arg)
#: lib/SVK/Command/Sync.pm:96
msgid "no mirrors found underneath %1"
msgstr ""

#: lib/SVK/Command/Mirror.pm:153
msgid "nothing to upgrade\n"
msgstr ""

#: lib/SVK/Command.pod:561
msgid "otherwise poke at. The local path is sometimes called a \"depot path.\""
msgstr ""

#: lib/SVK/Command.pod:562
msgid "patch - Manage patches"
msgstr "patch - 管理补缀档"

#: lib/SVK/Command.pod:563
msgid ""
"patch --apply                PATCHNAME [DEPOTPATH | PATH] [-- MERGEOPTIONS]"
msgstr ""
"patch --apply                补缀名称 [档案库路径 | 路径] [-- 合并选项]"

#: lib/SVK/Command.pod:564
msgid "patch --cat   [--view]       PATCHNAME"
msgstr "patch --cat   [--view]       补缀名称"

#: lib/SVK/Command.pod:565
msgid "patch --ls    [--list]"
msgstr "patch --ls    [--list]"

#: lib/SVK/Command.pod:566
msgid "patch --regen [--regenerate] PATCHNAME"
msgstr "patch --regen [--regenerate] 补缀名称"

#: lib/SVK/Command.pod:567
msgid "patch --rm    [--delete]     PATCHNAME"
msgstr "patch --rm    [--delete]     补缀名称"

#: lib/SVK/Command.pod:568
msgid "patch --up    [--update]     PATCHNAME"
msgstr "patch --up    [--update]     补缀名称"

#. ($path)
#. ($copath)
#: lib/SVK/Editor/Checkout.pm:115 lib/SVK/Editor/Checkout.pm:208
msgid "path %1 already exists"
msgstr "路径 %1 已存在"

#. ($path)
#: lib/SVK/Editor/Checkout.pm:125
msgid "path %1 does not exist"
msgstr "路径 %1 不存在。"

#. ($target->report)
#. ($target2->report)
#. ($target->path)
#: lib/SVK/Command/Diff.pm:122 lib/SVK/Command/Diff.pm:161
#: lib/SVK/Command/Diff.pm:97 lib/SVK/Command/Propset.pm:105
msgid "path %1 does not exist.\n"
msgstr "路径 %1 不存在。\n"

#. ($copath)
#. ($report)
#: lib/SVK/.XD.pm.swp:46 lib/SVK/XD.pm:489 lib/SVK/XD.pm:492 lib/SVK/XD.pm:577
msgid "path %1 is not a checkout path.\n"
msgstr "路径 %1 不是已取出的路径。\n"

#. ($dst->report)
#: lib/SVK/Command/Copy.pm:84
msgid "path '%1' is already a checkout"
msgstr "路径 %1 已经是取出的路径"

#: lib/SVK/Command.pod:569
msgid "path's upstream subversion server, but the commit will be sent to the"
msgstr ""

#: lib/SVK/Command.pod:570
msgid "perform the command it's set to. For more details about the commands"
msgstr ""

#: lib/SVK/Command.pod:571
msgid "propdel - Delete a property on files or dirs"
msgstr "propdel - 删除档案或目录的属性"

#: lib/SVK/Command.pod:572
msgid "propdel PROPNAME [DEPOTPATH | PATH...]"
msgstr "propdel 属性名称 [档案库路径 | 路径...]"

#: lib/SVK/Command.pod:573
msgid "propedit - Edit a property on path"
msgstr "propedit - 编辑某路径的属性"

#: lib/SVK/Command.pod:574
msgid "propedit PROPNAME [DEPOTPATH | PATH...]"
msgstr "propedit 属性名称 [档案库路径 | 路径...]"

#. ($pname)
#: lib/SVK/Command/Propedit.pm:81
msgid "property %1"
msgstr "属性 %1"

#: lib/SVK/Command.pod:575
msgid "property values; when there are multiple paths"
msgstr "即使指定的路径不止一个，也不要在每项之前显示路径名称"

#: lib/SVK/Command.pod:576
msgid "propget - Display a property on path"
msgstr "propget - 显示某路径的属性"

#: lib/SVK/Command.pod:577
msgid "propget PROPNAME [DEPOTPATH | PATH...]"
msgstr "propget 属性名称 [档案库路径 | 路径...]"

#: lib/SVK/Command.pod:578
msgid "proplist - List all properties on files or dirs"
msgstr "proplist - 列出档案或目录的所有属性"

#: lib/SVK/Command.pod:579
msgid "proplist PATH..."
msgstr "proplist 路径..."

#: lib/SVK/Command.pod:580
msgid "propset - Set a property on path"
msgstr "propset - 设定路径的某项属性"

#: lib/SVK/Command.pod:581
msgid "propset PROPNAME PROPVAL [DEPOTPATH | PATH...]"
msgstr "propset 属性名称 属性值 [档案库路径 | 路径...]"

#: lib/SVK/Command.pod:582
msgid "pull - Bring changes from another repository"
msgstr "pull - 拉取远程档案库里的更动"

#: lib/SVK/Command.pod:583
msgid "pull DEPOTPATH"
msgstr "pull 档案库路径"

#: lib/SVK/Command.pod:584
msgid "pull [PATH...]"
msgstr "pull [路径...]"

#: lib/SVK/Command.pod:585
msgid "pull down changes from the upstream repository."
msgstr "拉取远程档案库里的更动。"

#: lib/SVK/Command.pod:586
msgid "push - Move changes into another repository"
msgstr "push - 推送更动到远程档案库里"

#: lib/SVK/Command.pod:587
msgid "push [DEPOTPATH | PATH]"
msgstr "push [档案库路径 | 路径]"

#: lib/SVK/Resolve.pm:292
msgid "q)uit? "
msgstr "q)离开？"

#: lib/SVK/Command.pod:588
msgid "rather than a local branch, you'll need to be able to access the"
msgstr ""

#: lib/SVK/Command/Mirror.pm:228
msgid "recover not supported.\n"
msgstr "不支持修复操作。\n"

#: lib/SVK/Mirror/Backend/SVNRa.pm:647
msgid "relayed merge back not supported yet.\n"
msgstr "不支持中继式合并。\n"

#. ($copath, $basename, $!)
#: lib/SVK/Command/Commit.pm:578 lib/SVK/Editor/Checkout.pm:143
#: lib/SVK/Editor/XD.pm:145
msgid "rename %1 to %2 failed: %3"
msgstr "无法将 %1 改名成 %2：%3"

#: lib/SVK/Command.pod:589
msgid "repositories."
msgstr "档案库。"

#: lib/SVK/Command.pod:590
msgid "repository in $HOME/.svk. If you set SVKROOT to a path on disk, svk"
msgstr ""

#: lib/SVK/Command.pod:591
msgid "resolved - Remove conflict mark from checkout items"
msgstr "resolved - 移除已取出项目上的冲突标记"

#: lib/SVK/Command.pod:592