Config-Model-Xorg
view release on metacpan or search on metacpan
lib/Config/Model/models/Xorg/Device/Fglrx.pl view on Meta::CPAN
"0x20008000" SOFTIMAGE|XSI, SOFTIMAGE|3D.',
'type' => 'leaf',
'value_type' => 'uniline'
},
'CapabilitiesEx',
{
'description' => '... hex ... Needs to be documented.',
'type' => 'leaf',
'value_type' => 'uniline'
},
'CenterMode',
{
'choice' => [
'on',
'off'
],
'description' => '
The Center-Mode allows "real" screen display in non-"panel native
modes" (e.g. a resolution of 1280x1024 on a 1600x1200 LCD): one
pixel of the frame buffer is one pixel on the screen. The display
is centered on the screen and the surrounding screen area remains
black. Note that some panels may not work in Center-Mode, so the
screen remains black then. The default is: "off".',
'type' => 'leaf',
'value_type' => 'enum'
},
'ClientDriverName',
{
'description' => 'Needs to be documented.',
'type' => 'leaf',
'value_type' => 'uniline'
},
'Dac6Bit',
{
'choice' => [
'on',
'off'
],
'description' => '
Enables or disables the use of 6 bits per color component when in 8
bpp mode (emulates VGA mode). By default, all 8 bits per color
component are used. The default is: "off".',
'type' => 'leaf',
'value_type' => 'enum'
},
'DefaultVisualTrueColor',
{
'choice' => [
'on',
'off'
],
'description' => '
Set the X-server to use a TrueColor visual as default. You can
check the result with xpdyinfo(1). The default is: "off".',
'type' => 'leaf',
'value_type' => 'enum'
},
'DesktopSetup',
{
'description' => '
This option defines the desktop setup. The driver can work with the
following modes:
"0x00000000" "single" Single head mode.
"0x00000100" "clone" Clone mode.
"0x00000101" "mirror" Mirror mode.
"0x00000200" "horizontal" Big Desktop mode.
"0x00000201" "horizontal,reverse" Big Desktop mode.
"0x00000300" "vertical,reverse" Big Desktop mode.
"0x00000301" "vertical" Big Desktop mode.
"0x00000000" Dual head mode.
The modes are:
Single head mode:
Single monitor operation only. If a second monitor is
connected, it remains dark. Only in this mode a full overlay
functionality is available.
Clone mode:
The contents of the primary monitor are duplicated on the
second monitor. If one monitor cannot display the selected
resolution, a lower resolution is automatically selected for
this monitor. The original resolution is used then as it was
specified as the virtual resolution. This means the second
screen will do panning when the mouse moves ahead.
Mirror mode:
The contents of the primary monitor are duplicated on the
second monitor. Both monitors have an identical refresh rate
and resolution.
Important
This mode is not supported on RADEON X1x00 and FireGL V3300,
V3400, V5200, V7200, V7300, V7350 cards.
Big Desktop mode(s):
There is a single big frame buffer that gets split either
horizontally or vertically and each half is sent to a single
monitor. Both monitors have to operate with the same video mode
settings and only one window manager can be used. The
orientation is set with:
"0x00000200" Primary display is left.
"0x00000201" Primary display is right.
"0x00000300" Primary display is top.
"0x00000301" Primary display is bottom.
Dual head mode:
A dual head setup uses separate frame buffers, independent
displays and video modes for each monitor. Two window managers
can be used.
Note
A connected digital display is always the primary display. If two
display devices are connected, the primary head is: the bottom DVI
port on FireGL X1, LCD output on MOBILITY RADEON M9 and the only
DVI port on other cards. The secondary head is: the top DVI port on
FireGL X1 and the VGA port on all other cards.',
lib/Config/Model/models/Xorg/Device/Fglrx.pl view on Meta::CPAN
{
'choice' => [
'on',
'off'
],
'description' => 'Enable or disable TV-Out for a monitor.',
'type' => 'leaf',
'value_type' => 'enum'
},
'OpenGLOverlay',
{
'choice' => [
'on',
'off'
],
'description' => 'If you enable this option, Option "VideoOverlay" will be disabled automatically.',
'type' => 'leaf',
'value_type' => 'enum'
},
'PBuffer',
{
'choice' => [
0,
1,
2,
3,
4
],
'description' => '"0" PBuffer area disabled.
"1" Size of PBuffer area 1280x1024.
"2" Size of PBuffer area 1600x1200.
"3" Size of PBuffer area 1920x1200.
"4" Size of PBuffer area 2048x1536.',
'type' => 'leaf',
'value_type' => 'enum'
},
'PowerState',
{
'type' => 'leaf',
'value_type' => 'uniline'
},
'PseudoColorVisuals',
{
'choice' => [
'on',
'off'
],
'description' => 'Enabling this options allows the usage of pseudo color visuals at the same time with true color visuals using the overlay technique. The default is: "off".',
'type' => 'leaf',
'upstream_default' => 'off',
'value_type' => 'enum'
},
'RingSize',
{
'description' => 'Needs to be documented. (ring buffer size, default = "1", values in MB)',
'type' => 'leaf',
'value_type' => 'integer'
},
'ScreenOverlap',
{
'description' => 'This option is intended to allow image overlapping with e.g. two video projectors. It only applies to big desktops (see Option "DesktopSetup").',
'type' => 'leaf',
'value_type' => 'integer'
},
'SilkenMouse',
{
'choice' => [
'on',
'off'
],
'description' => 'Enable or disable the hardware cursor to be updated asynchronously by the signal handler associated with mouse events. The default is: "on".',
'type' => 'leaf',
'value_type' => 'enum'
},
'Stereo',
{
'choice' => [
'on',
'off'
],
'description' => 'To enable Stereo mode of Quad Buffer Stereo ("Active Stereo") capable cards, set this value to "on" and disable Option "VideoOverlay" and Option "OpenGLOverlay". The default is: "off". If you enable Stereo Quad Buffering the...
'type' => 'leaf',
'value_type' => 'enum'
},
'StereoSyncEnable',
{
'type' => 'leaf',
'value_type' => 'integer'
},
'SWCursor',
{
'choice' => [
'on',
'off'
],
'description' => 'Disable or enable the use of a software cursor. The default is: "off".',
'type' => 'leaf',
'value_type' => 'enum'
},
'TMDSCoherentMode',
{
'choice' => [
'on',
'off'
],
'description' => 'Internal TMDS transmitter can be programmed in 2 different ways to get best signal qualities depending on connected transmitter chips in the panel. The noise must appear in 1600x1200 mode, but can also come up in 1280x1024x7...
'type' => 'leaf',
'value_type' => 'enum'
},
'TexturedVideo',
{
'choice' => [
'on',
'off'
],
'type' => 'leaf',
'value_type' => 'enum'
},
'TVFormat',
{
'choice' => [
'NTSC-JPN',
'NTSC-M',
'NTSC-N',
'PAL-B',
'PAL-CN',
'PAL-D',
'PAL-G',
'PAL-H',
'PAL-I',
'PAL-K',
'PAL-K1',
'PAL-L',
'PAL-M',
'PAL-N',
'PAL-SCART'
],
'description' => 'Choose the TV format.',
'type' => 'leaf',
'value_type' => 'enum'
},
lib/Config/Model/models/Xorg/Device/Fglrx.pl view on Meta::CPAN
'off',
'on'
],
'description' => 'Use this option to set the method to maintain the so called Thread Local Storage (TLS) locations. The default is: "off".
If you do spot an immediate segmentation fault after launching a program that makes use of OpenGL and further when the fault can be traced down to the OpenGL implementation of the graphics driver, then you should try to tune the TLS settings.',
'help' => {
'0' => 'Fast operations. Provides the highest possible OpenGL
performance. The method makes use of a quite limited resource.
This is the default.',
'1' => 'Fast operations.',
'2' => 'Compatible mode. Fast operations are turned off. This method is
some 10% slower and uses a less limited resource. Preferred for
Wine(X), emulators and other VM manipulating programs.'
},
'type' => 'leaf',
'upstream_default' => 'off',
'value_type' => 'enum'
},
'UseInternalAGPGART',
{
'choice' => [
'yes',
'no'
],
'description' => '
Enable or disable the usage of an internal agpgart module. If you
set this option to "yes", the driver will not use the kernel\'s
AGPGart module. Instead it will make use of the "built-in" AGP
support. The default is "no", as long as the graphics driver\'s
kernel module detects the presence of an agpgart kernel module.
Warning
If you set this option to "yes" you must ensure, that you do not
have the kernel AGP support compiled in. Instead compile it as
modules.
The AGP support in the driver may not always work, depending on the
type of motherboard and/or card that you have. But there is a
possibility, which maybe still works. Refer to the
"agp_try_unsupported=1" value for Option "KernelModuleParm".',
'type' => 'leaf',
'value_type' => 'enum'
},
'VideoOverlay',
{
'choice' => [
'on',
'off'
],
'description' => '
... Video Overlay for the Xv extension ... If you want enable this
option, Option "OpenGLOverlay" must not be enabled.',
'type' => 'leaf',
'value_type' => 'enum'
},
'VRefresh2',
{
'description' => '"frequency"
Vertical refresh rate range for the second monitor in e.g. big
desktop mode.
Note
You can skip this value, if you define an appropriate VertRefresh
line in the related Section "Monitor".',
'type' => 'leaf',
'value_type' => 'integer'
}
],
'name' => 'Xorg::Device::Fglrx'
}
]
;
( run in 0.901 second using v1.01-cache-2.11-cpan-e1769b4cff6 )