view release on metacpan or  search on metacpan

lib/Audio/Opusfile.pm  view on Meta::CPAN

If the source is not seekable, I<$link_index> is negative, or
I<$link_index> is not given, then this function returns the serial
number of the current link.

=item $of->B<raw_total>([I<$link_index>])

Get the total (compressed) size of the stream (with no arguments), or
of an individual link in a (possibly-chained) Ogg Opus stream (with
one nonnegative argument), including all headers and Ogg muxing
overhead.

The stream must be seekable to get the total. A negative value is
returned if the stream is not seekable.

B<Warning:> If the Opus stream (or link) is concurrently multiplexed
with other logical streams (e.g., video), this returns the size of the
entire stream (or link), not just the number of bytes in the first
logical Opus stream. Returning the latter would require scanning the
entire file.

=item $of->B<pcm_total>([I<$link_index>])

Get the total PCM length (number of samples at 48 kHz) of the stream
(with no arguments), or of an individual link in a (possibly-chained)
Ogg Opus stream (with one nonnegative argument).

Users looking for op_time_total() should use this function instead.
Because timestamps in Opus are fixed at 48 kHz, there is no need for a
separate function to convert this to seconds.

The stream must be seekable to get the total. A negative value is
returned if the stream is not seekable.

=item $of->B<current_link>

Retrieve the index of the current link.

This is the link that produced the data most recently read by
op_read_float() or its associated functions, or, after a seek, the
link that the seek target landed in. Reading more data may advance the
link index (even on the first read after a seek).

=item $of->B<bitrate>([I<$link_index>])

Computes the bitrate of the stream (with no arguments), or of an
individual link in a (possibly-chained) Ogg Opus stream (with one
nonnegative argument).

The stream must be seekable to compute the bitrate. A negative value
is returned if the stream is not seekable.

B<Warning:> If the Opus stream (or link) is concurrently multiplexed with
other logical streams (e.g., video), this uses the size of the entire
stream (or link) to compute the bitrate, not just the number of bytes
in the first logical Opus stream.

=item $of->B<bitrate_instant>

Compute the instantaneous bitrate, measured as the ratio of bits to
playable samples decoded since a) the last call to B<bitrate_instant>,
b) the last seek, or c) the start of playback, whichever was most
recent.

This will spike somewhat after a seek or at the start/end of a chain
boundary, as pre-skip, pre-roll, and end-trimming causes samples to be
decoded but not played.

=item $of->B<raw_tell>

Obtain the current value of the position indicator of I<$of>. This is
the byte position that is currently being read from.

=item $of->B<pcm_tell>

Obtain the PCM offset of the next sample to be read.

If the stream is not properly timestamped, this might not increment by
the proper amount between reads, or even return monotonically
increasing values.

=item $of->B<raw_seek>(I<$offset>)

Seek to a byte offset relative to the compressed data.

This also scans packets to update the PCM cursor. It will cross a
logical bitstream boundary, but only if it can't get any packets out
of the tail of the link to which it seeks.

=item $of->B<pcm_seek>(I<$offset>)

Seek to the specified PCM offset, such that decoding will begin at
exactly the requested position. The PCM offset is in samples at 48 kHz
relative to the start of the stream.

=item $of->B<set_gain_offset>(I<$gain_type>, I<$gain_offset>)

Sets the gain to be used for decoded output.

By default, the gain in the header is applied with no additional
offset. The total gain (including header gain and/or track gain, if
applicable, and this offset), will be clamped to [-32768,32767]/256
dB. This is more than enough to saturate or underflow 16-bit PCM.

B<Note:> The new gain will not be applied to any already buffered,
decoded output. This means you cannot change it sample-by-sample, as
at best it will be updated packet-by-packet. It is meant for setting a
target volume level, rather than applying smooth fades, etc.

I<$gain_type> is one of OP_HEADER_GAIN, OP_TRACK_GAIN, or
OP_ABSOLUTE_GAIN. I<$gain_offset> is in 1/256ths of a dB.

=item $of->B<set_dither_enabled>(I<$enabled>)

Sets whether or not dithering is enabled for 16-bit decoding.

By default, when libopusfile is compiled to use floating-point
internally, calling read() or read_stereo() will first decode to
float, and then convert to fixed-point using noise-shaping dithering.
This flag can be used to disable that dithering. When the application
uses read_float() or read_float_stereo(), or when the library has been
compiled to decode directly to fixed point, this flag has no effect.

=item $of->B<read>([I<$bufsize>])

It is recommended to use B<read_float> instead of this method if the
rest of your audio processing chain can handle floating point.

Reads more samples from the stream. I<$bufsize> is the maximum number
of samples read, and it defaults to 1048576. Returns a list whose
first element is the link index this data was decoded from, and the
rest of the elements are PCM samples, as signed 16-bit values at 48
kHz with a nominal range of [-32768,32767). Multiple channels are
interleaved using the L<Vorbis channel ordering|https://www.xiph.org/vorbis/doc/Vorbis_I_spec.html#x1-810004.3.9>.

You can use C<< $of->head($li)->channel_count >> to find out the
channel count of a given link index.

=item $of->B<read_float>([I<$bufsize>])

Like B<read>, but samples are signed floats with a nominal range of
[-1.0, 1.0].

=item $of->B<read_stereo>([I<$bufsize>])

Like B<read>, but downmixes the stream to stereo (therefore you will
always get two channels) and does NOT return the link index (the first
return value is the first sample).

=item $of->B<read_float_stereo>([I<$bufsize>])

Like B<read_float>, but downmixes the stream to stereo (therefore you
will always get two channels) and does NOT return the link index (the
first return value is the first sample).

=back

=head1 EXPORT

All constants are exported by default:

  OPUS_CHANNEL_COUNT_MAX
  OP_ABSOLUTE_GAIN
  OP_DEC_FORMAT_FLOAT
  OP_DEC_FORMAT_SHORT
  OP_DEC_USE_DEFAULT
  OP_EBADHEADER
  OP_EBADLINK
  OP_EBADPACKET
  OP_EBADTIMESTAMP
  OP_EFAULT
  OP_EIMPL
  OP_EINVAL
  OP_ENOSEEK
  OP_ENOTAUDIO
  OP_ENOTFORMAT
  OP_EOF
  OP_EREAD
  OP_EVERSION
  OP_FALSE
  OP_GET_SERVER_INFO_REQUEST
  OP_HEADER_GAIN
  OP_HOLE
  OP_HTTP_PROXY_HOST_REQUEST
  OP_HTTP_PROXY_PASS_REQUEST
  OP_HTTP_PROXY_PORT_REQUEST
  OP_HTTP_PROXY_USER_REQUEST
  OP_PIC_FORMAT_GIF
  OP_PIC_FORMAT_JPEG
  OP_PIC_FORMAT_PNG
  OP_PIC_FORMAT_UNKNOWN