view release on metacpan or  search on metacpan

corpus/libpalindrome/depcomp  view on Meta::CPAN

fi

if test "$depmode" = xlc; then
  # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information.
  gccflag=-qmakedep=gcc,-MF
  depmode=gcc
fi

case "$depmode" in
gcc3)
## gcc 3 implements dependency tracking that does exactly what
## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
## it if -MD -MP comes after the -MF stuff.  Hmm.
## Unfortunately, FreeBSD c89 acceptance of flags depends upon
## the command line argument order; so add the flags where they
## appear in depend2.am.  Note that the slowdown incurred here
## affects only configure: in makefiles, %FASTDEP% shortcuts this.
  for arg
  do
    case $arg in
    -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
    *)  set fnord "$@" "$arg" ;;
    esac
    shift # fnord
    shift # $arg
  done
  "$@"
  stat=$?
  if test $stat -ne 0; then
    rm -f "$tmpdepfile"
    exit $stat
  fi
  mv "$tmpdepfile" "$depfile"
  ;;

gcc)
## Note that this doesn't just cater to obsosete pre-3.x GCC compilers.
## but also to in-use compilers like IMB xlc/xlC and the HP C compiler.
## (see the conditional assignment to $gccflag above).
## There are various ways to get dependency output from gcc.  Here's
## why we pick this rather obscure method:
## - Don't want to use -MD because we'd like the dependencies to end
##   up in a subdir.  Having to rename by hand is ugly.
##   (We might end up doing this anyway to support other compilers.)
## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
##   -MM, not -M (despite what the docs say).  Also, it might not be
##   supported by the other compilers which use the 'gcc' depmode.
## - Using -M directly means running the compiler twice (even worse
##   than renaming).
  if test -z "$gccflag"; then
    gccflag=-MD,
  fi
  "$@" -Wp,"$gccflag$tmpdepfile"
  stat=$?
  if test $stat -ne 0; then
    rm -f "$tmpdepfile"
    exit $stat
  fi
  rm -f "$depfile"
  echo "$object : \\" > "$depfile"
  # The second -e expression handles DOS-style file names with drive
  # letters.
  sed -e 's/^[^:]*: / /' \
      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
## This next piece of magic avoids the "deleted header file" problem.
## The problem is that when a header file which appears in a .P file
## is deleted, the dependency causes make to die (because there is
## typically no way to rebuild the header).  We avoid this by adding
## dummy dependencies for each header file.  Too bad gcc doesn't do
## this for us directly.
## Some versions of gcc put a space before the ':'.  On the theory
## that the space means something, we add a space to the output as
## well.  hp depmode also adds that space, but also prefixes the VPATH
## to the object.  Take care to not repeat it in the output.
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly.  Breaking it into two sed invocations is a workaround.
  tr ' ' "$nl" < "$tmpdepfile" \
    | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
    | sed -e 's/$/ :/' >> "$depfile"
  rm -f "$tmpdepfile"
  ;;

hp)
  # This case exists only to let depend.m4 do its work.  It works by
  # looking at the text of this script.  This case will never be run,
  # since it is checked for above.
  exit 1
  ;;

sgi)
  if test "$libtool" = yes; then
    "$@" "-Wp,-MDupdate,$tmpdepfile"
  else
    "$@" -MDupdate "$tmpdepfile"
  fi
  stat=$?
  if test $stat -ne 0; then
    rm -f "$tmpdepfile"
    exit $stat
  fi
  rm -f "$depfile"

  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
    echo "$object : \\" > "$depfile"
    # Clip off the initial element (the dependent).  Don't try to be
    # clever and replace this with sed code, as IRIX sed won't handle
    # lines with more than a fixed number of characters (4096 in
    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
    # the IRIX cc adds comments like '#:fec' to the end of the
    # dependency line.
    tr ' ' "$nl" < "$tmpdepfile" \
      | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \
      | tr "$nl" ' ' >> "$depfile"
    echo >> "$depfile"
    # The second pass generates a dummy entry for each header file.
    tr ' ' "$nl" < "$tmpdepfile" \
      | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
      >> "$depfile"
  else
    make_dummy_depfile
  fi
  rm -f "$tmpdepfile"
  ;;

xlc)
  # This case exists only to let depend.m4 do its work.  It works by
  # looking at the text of this script.  This case will never be run,
  # since it is checked for above.
  exit 1
  ;;

aix)
  # The C for AIX Compiler uses -M and outputs the dependencies
  # in a .u file.  In older versions, this file always lives in the
  # current directory.  Also, the AIX compiler puts '$object:' at the
  # start of each line; $object doesn't have directory information.
  # Version 6 uses the directory in both cases.
  set_dir_from "$object"
  set_base_from "$object"
  if test "$libtool" = yes; then
    tmpdepfile1=$dir$base.u
    tmpdepfile2=$base.u
    tmpdepfile3=$dir.libs/$base.u
    "$@" -Wc,-M
  else
    tmpdepfile1=$dir$base.u
    tmpdepfile2=$dir$base.u
    tmpdepfile3=$dir$base.u
    "$@" -M
  fi
  stat=$?
  if test $stat -ne 0; then
    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
    exit $stat
  fi

  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
  do
    test -f "$tmpdepfile" && break
  done
  aix_post_process_depfile
  ;;

tcc)
  # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26
  # FIXME: That version still under development at the moment of writing.
  #        Make that this statement remains true also for stable, released
  #        versions.
  # It will wrap lines (doesn't matter whether long or short) with a
  # trailing '\', as in:
  #
  #   foo.o : \
  #    foo.c \
  #    foo.h \
  #
  # It will put a trailing '\' even on the last line, and will use leading
  # spaces rather than leading tabs (at least since its commit 0394caf7
  # "Emit spaces for -MD").
  "$@" -MD -MF "$tmpdepfile"
  stat=$?
  if test $stat -ne 0; then
    rm -f "$tmpdepfile"
    exit $stat
  fi
  rm -f "$depfile"
  # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'.
  # We have to change lines of the first kind to '$object: \'.
  sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile"
  # And for each line of the second kind, we have to emit a 'dep.h:'
  # dummy dependency, to avoid the deleted-header problem.
  sed -n -e 's|^  *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile"
  rm -f "$tmpdepfile"
  ;;

## The order of this option in the case statement is important, since the
## shell code in configure will try each of these formats in the order
## listed in this file.  A plain '-MD' option would be understood by many
## compilers, so we must ensure this comes after the gcc and icc options.
pgcc)
  # Portland's C compiler understands '-MD'.
  # Will always output deps to 'file.d' where file is the root name of the
  # source file under compilation, even if file resides in a subdirectory.
  # The object file name does not affect the name of the '.d' file.
  # pgcc 10.2 will output
  #    foo.o: sub/foo.c sub/foo.h
  # and will wrap long lines using '\' :
  #    foo.o: sub/foo.c ... \
  #     sub/foo.h ... \
  #     ...
  set_dir_from "$object"
  # Use the source, not the object, to determine the base name, since
  # that's sadly what pgcc will do too.
  set_base_from "$source"
  tmpdepfile=$base.d

  # For projects that build the same source file twice into different object
  # files, the pgcc approach of using the *source* file root name can cause
  # problems in parallel builds.  Use a locking strategy to avoid stomping on
  # the same $tmpdepfile.
  lockdir=$base.d-lock
  trap "
    echo '$0: caught signal, cleaning up...' >&2
    rmdir '$lockdir'
    exit 1
  " 1 2 13 15
  numtries=100
  i=$numtries
  while test $i -gt 0; do
    # mkdir is a portable test-and-set.
    if mkdir "$lockdir" 2>/dev/null; then
      # This process acquired the lock.
      "$@" -MD
      stat=$?
      # Release the lock.
      rmdir "$lockdir"
      break
    else
      # If the lock is being held by a different process, wait
      # until the winning process is done or we timeout.
      while test -d "$lockdir" && test $i -gt 0; do
        sleep 1
        i=`expr $i - 1`
      done
    fi
    i=`expr $i - 1`
  done
  trap - 1 2 13 15
  if test $i -le 0; then
    echo "$0: failed to acquire lock after $numtries attempts" >&2

corpus/libpalindrome/depcomp  view on Meta::CPAN

  ;;

tru64)
  # The Tru64 compiler uses -MD to generate dependencies as a side
  # effect.  'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
  # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
  # dependencies in 'foo.d' instead, so we check for that too.
  # Subdirectories are respected.
  set_dir_from  "$object"
  set_base_from "$object"

  if test "$libtool" = yes; then
    # Libtool generates 2 separate objects for the 2 libraries.  These
    # two compilations output dependencies in $dir.libs/$base.o.d and
    # in $dir$base.o.d.  We have to check for both files, because
    # one of the two compilations can be disabled.  We should prefer
    # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
    # automatically cleaned when .libs/ is deleted, while ignoring
    # the former would cause a distcleancheck panic.
    tmpdepfile1=$dir$base.o.d          # libtool 1.5
    tmpdepfile2=$dir.libs/$base.o.d    # Likewise.
    tmpdepfile3=$dir.libs/$base.d      # Compaq CCC V6.2-504
    "$@" -Wc,-MD
  else
    tmpdepfile1=$dir$base.d
    tmpdepfile2=$dir$base.d
    tmpdepfile3=$dir$base.d
    "$@" -MD
  fi

  stat=$?
  if test $stat -ne 0; then
    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
    exit $stat
  fi

  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
  do
    test -f "$tmpdepfile" && break
  done
  # Same post-processing that is required for AIX mode.
  aix_post_process_depfile
  ;;

msvc7)
  if test "$libtool" = yes; then
    showIncludes=-Wc,-showIncludes
  else
    showIncludes=-showIncludes
  fi
  "$@" $showIncludes > "$tmpdepfile"
  stat=$?
  grep -v '^Note: including file: ' "$tmpdepfile"
  if test $stat -ne 0; then
    rm -f "$tmpdepfile"
    exit $stat
  fi
  rm -f "$depfile"
  echo "$object : \\" > "$depfile"
  # The first sed program below extracts the file names and escapes
  # backslashes for cygpath.  The second sed program outputs the file
  # name when reading, but also accumulates all include files in the
  # hold buffer in order to output them again at the end.  This only
  # works with sed implementations that can handle large buffers.
  sed < "$tmpdepfile" -n '
/^Note: including file:  *\(.*\)/ {
  s//\1/
  s/\\/\\\\/g
  p
}' | $cygpath_u | sort -u | sed -n '
s/ /\\ /g
s/\(.*\)/'"$tab"'\1 \\/p
s/.\(.*\) \\/\1:/
H
$ {
  s/.*/'"$tab"'/
  G
  p
}' >> "$depfile"
  echo >> "$depfile" # make sure the fragment doesn't end with a backslash
  rm -f "$tmpdepfile"
  ;;

msvc7msys)
  # This case exists only to let depend.m4 do its work.  It works by
  # looking at the text of this script.  This case will never be run,
  # since it is checked for above.
  exit 1
  ;;

#nosideeffect)
  # This comment above is used by automake to tell side-effect
  # dependency tracking mechanisms from slower ones.

dashmstdout)
  # Important note: in order to support this mode, a compiler *must*
  # always write the preprocessed file to stdout, regardless of -o.
  "$@" || exit $?

  # Remove the call to Libtool.
  if test "$libtool" = yes; then
    while test "X$1" != 'X--mode=compile'; do
      shift
    done
    shift
  fi

  # Remove '-o $object'.
  IFS=" "
  for arg
  do
    case $arg in
    -o)
      shift
      ;;
    $object)
      shift
      ;;
    *)
      set fnord "$@" "$arg"
      shift # fnord