Coro
view release on metacpan or search on metacpan
Similar to "async", but uses a coro pool, so you should not call
terminate or join on it (although you are allowed to), and you get a
coro that might have executed other code already (which can be good
or bad :).
On the plus side, this function is about twice as fast as creating
(and destroying) a completely new coro, so if you need a lot of
generic coros in quick successsion, use "async_pool", not "async".
The code block is executed in an "eval" context and a warning will
be issued in case of an exception instead of terminating the
program, as "async" does. As the coro is being reused, stuff like
"on_destroy" will not work in the expected way, unless you call
terminate or cancel, which somehow defeats the purpose of pooling
(but is fine in the exceptional case).
The priority will be reset to 0 after each run, all "swap_sv" calls
will be undone, tracing will be disabled, the description will be
reset and the default output filehandle gets restored, so you can
change all these. Otherwise the coro will be re-used "as-is": most
notably if you change other per-coro global stuff such as $/ you
*must needs* revert that change, which is most simply done by using
local as in: "local $/".
The idle pool size is limited to 8 idle coros (this can be adjusted
by changing $Coro::POOL_SIZE), but there can be as many non-idle
coros as required.
If you are concerned about pooled coros growing a lot because a
single "async_pool" used a lot of stackspace you can e.g.
"async_pool { terminate }" once per second or so to slowly replenish
the pool. In addition to that, when the stacks used by a handler
grows larger than 32kb (adjustable via $Coro::POOL_RSS) it will also
be destroyed.
STATIC METHODS
Static methods are actually functions that implicitly operate on the
current coro.
schedule
Calls the scheduler. The scheduler will find the next coro that is
to be run from the ready queue and switches to it. The next coro to
be run is simply the one with the highest priority that is longest
in its ready queue. If there is no coro ready, it will call the
$Coro::idle hook.
Please note that the current coro will *not* be put into the ready
queue, so calling this function usually means you will never be
called again unless something else (e.g. an event handler) calls
"->ready", thus waking you up.
This makes "schedule" *the* generic method to use to block the
current coro and wait for events: first you remember the current
coro in a variable, then arrange for some callback of yours to call
"->ready" on that once some event happens, and last you call
"schedule" to put yourself to sleep. Note that a lot of things can
wake your coro up, so you need to check whether the event indeed
happened, e.g. by storing the status in a variable.
See HOW TO WAIT FOR A CALLBACK, below, for some ways to wait for
callbacks.
cede
"Cede" to other coros. This function puts the current coro into the
ready queue and calls "schedule", which has the effect of giving up
the current "timeslice" to other coros of the same or higher
priority. Once your coro gets its turn again it will automatically
be resumed.
This function is often called "yield" in other languages.
Coro::cede_notself
Works like cede, but is not exported by default and will cede to
*any* coro, regardless of priority. This is useful sometimes to
ensure progress is made.
terminate [arg...]
Terminates the current coro with the given status values (see
cancel). The values will not be copied, but referenced directly.
Coro::on_enter BLOCK, Coro::on_leave BLOCK
These function install enter and leave winders in the current scope.
The enter block will be executed when on_enter is called and
whenever the current coro is re-entered by the scheduler, while the
leave block is executed whenever the current coro is blocked by the
scheduler, and also when the containing scope is exited (by whatever
means, be it exit, die, last etc.).
*Neither invoking the scheduler, nor exceptions, are allowed within
those BLOCKs*. That means: do not even think about calling "die"
without an eval, and do not even think of entering the scheduler in
any way.
Since both BLOCKs are tied to the current scope, they will
automatically be removed when the current scope exits.
These functions implement the same concept as "dynamic-wind" in
scheme does, and are useful when you want to localise some resource
to a specific coro.
They slow down thread switching considerably for coros that use them
(about 40% for a BLOCK with a single assignment, so thread switching
is still reasonably fast if the handlers are fast).
These functions are best understood by an example: The following
function will change the current timezone to
"Antarctica/South_Pole", which requires a call to "tzset", but by
using "on_enter" and "on_leave", which remember/change the current
timezone and restore the previous value, respectively, the timezone
is only changed for the coro that installed those handlers.
use POSIX qw(tzset);
async {
my $old_tz; # store outside TZ value here
Coro::on_enter {
$old_tz = $ENV{TZ}; # remember the old value
$ENV{TZ} = "Antarctica/South_Pole";
tzset; # enable new value
However, what you never should do is first try to cancel "safely"
and if that fails, cancel the "hard" way with "->cancel". That makes
no sense: either you rely on being able to execute cleanup code in
your thread context, or you don't. If you do, then "->safe_cancel"
is the only way, and if you don't, then "->cancel" is always faster
and more direct.
$coro->schedule_to
Puts the current coro to sleep (like "Coro::schedule"), but instead
of continuing with the next coro from the ready queue, always switch
to the given coro object (regardless of priority etc.). The
readyness state of that coro isn't changed.
This is an advanced method for special cases - I'd love to hear
about any uses for this one.
$coro->cede_to
Like "schedule_to", but puts the current coro into the ready queue.
This has the effect of temporarily switching to the given coro, and
continuing some time later.
This is an advanced method for special cases - I'd love to hear
about any uses for this one.
$coro->throw ([$scalar])
If $throw is specified and defined, it will be thrown as an
exception inside the coro at the next convenient point in time.
Otherwise clears the exception object.
Coro will check for the exception each time a schedule-like-function
returns, i.e. after each "schedule", "cede",
"Coro::Semaphore->down", "Coro::Handle->readable" and so on. Most of
those functions (all that are part of Coro itself) detect this case
and return early in case an exception is pending.
The exception object will be thrown "as is" with the specified
scalar in $@, i.e. if it is a string, no line number or newline will
be appended (unlike with "die").
This can be used as a softer means than either "cancel" or
"safe_cancel "to ask a coro to end itself, although there is no
guarantee that the exception will lead to termination, and if the
exception isn't caught it might well end the whole program.
You might also think of "throw" as being the moral equivalent of
"kill"ing a coro with a signal (in this case, a scalar).
$coro->join
Wait until the coro terminates and return any values given to the
"terminate" or "cancel" functions. "join" can be called concurrently
from multiple threads, and all will be resumed and given the status
return once the $coro terminates.
$coro->on_destroy (\&cb)
Registers a callback that is called when this coro thread gets
destroyed, that is, after it's resources have been freed but before
it is joined. The callback gets passed the terminate/cancel
arguments, if any, and *must not* die, under any circumstances.
There can be any number of "on_destroy" callbacks per coro, and
there is currently no way to remove a callback once added.
$oldprio = $coro->prio ($newprio)
Sets (or gets, if the argument is missing) the priority of the coro
thread. Higher priority coro get run before lower priority coros.
Priorities are small signed integers (currently -4 .. +3), that you
can refer to using PRIO_xxx constants (use the import tag :prio to
get then):
PRIO_MAX > PRIO_HIGH > PRIO_NORMAL > PRIO_LOW > PRIO_IDLE > PRIO_MIN
3 > 1 > 0 > -1 > -3 > -4
# set priority to HIGH
current->prio (PRIO_HIGH);
The idle coro thread ($Coro::idle) always has a lower priority than
any existing coro.
Changing the priority of the current coro will take effect
immediately, but changing the priority of a coro in the ready queue
(but not running) will only take effect after the next schedule (of
that coro). This is a bug that will be fixed in some future version.
$newprio = $coro->nice ($change)
Similar to "prio", but subtract the given value from the priority
(i.e. higher values mean lower priority, just as in UNIX's nice
command).
$olddesc = $coro->desc ($newdesc)
Sets (or gets in case the argument is missing) the description for
this coro thread. This is just a free-form string you can associate
with a coro.
This method simply sets the "$coro->{desc}" member to the given
string. You can modify this member directly if you wish, and in
fact, this is often preferred to indicate major processing states
that can then be seen for example in a Coro::Debug session:
sub my_long_function {
local $Coro::current->{desc} = "now in my_long_function";
...
$Coro::current->{desc} = "my_long_function: phase 1";
...
$Coro::current->{desc} = "my_long_function: phase 2";
...
}
GLOBAL FUNCTIONS
Coro::nready
Returns the number of coro that are currently in the ready state,
i.e. that can be switched to by calling "schedule" directory or
indirectly. The value 0 means that the only runnable coro is the
currently running one, so "cede" would have no effect, and
"schedule" would cause a deadlock unless there is an idle handler
that wakes up some coro.
my $guard = Coro::guard { ... }
This function still exists, but is deprecated. Please use the
"Guard::guard" function instead.
unblock_sub { ... }
This utility function takes a BLOCK or code reference and "unblocks"
it, returning a new coderef. Unblocking means that calling the new
coderef will return immediately without blocking, returning nothing,
while the original code ref will be called (with parameters) from
within another coro.
The reason this function exists is that many event libraries (such
as the venerable Event module) are not thread-safe (a weaker form of
reentrancy). This means you must not block within event callbacks,
otherwise you might suffer from crashes or worse. The only event
library currently known that is safe to use without "unblock_sub" is
EV (but you might still run into deadlocks if all event loops are
blocked).
Coro will try to catch you when you block in the event loop ("FATAL:
$Coro::idle blocked itself"), but this is just best effort and only
works when you do not run your own event loop.
This function allows your callbacks to block by executing them in
another coro where it is safe to block. One example where blocking
is handy is when you use the Coro::AIO functions to save results to
disk, for example.
In short: simply use "unblock_sub { ... }" instead of "sub { ... }"
when creating event callbacks that want to block.
If your handler does not plan to block (e.g. simply sends a message
to another coro, or puts some other coro into the ready queue),
there is no reason to use "unblock_sub".
Note that you also need to use "unblock_sub" for any other callbacks
that are indirectly executed by any C-based event loop. For example,
when you use a module that uses AnyEvent (and you use
Coro::AnyEvent) and it provides callbacks that are the result of
some event callback, then you must not block either, or use
"unblock_sub".
$cb = rouse_cb
Create and return a "rouse callback". That's a code reference that,
when called, will remember a copy of its arguments and notify the
owner coro of the callback.
See the next function.
@args = rouse_wait [$cb]
Wait for the specified rouse callback (or the last one that was
created in this coro).
As soon as the callback is invoked (or when the callback was invoked
before "rouse_wait"), it will return the arguments originally passed
to the rouse callback. In scalar context, that means you get the
*last* argument, just as if "rouse_wait" had a "return ($a1, $a2,
$a3...)" statement at the end.
See the section HOW TO WAIT FOR A CALLBACK for an actual usage
example.
HOW TO WAIT FOR A CALLBACK
It is very common for a coro to wait for some callback to be called.
This occurs naturally when you use coro in an otherwise event-based
program, or when you use event-based libraries.
These typically register a callback for some event, and call that
callback when the event occurred. In a coro, however, you typically want
to just wait for the event, simplyifying things.
For example "AnyEvent->child" registers a callback to be called when a
specific child has exited:
my $child_watcher = AnyEvent->child (pid => $pid, cb => sub { ... });
But from within a coro, you often just want to write this:
my $status = wait_for_child $pid;
Coro offers two functions specifically designed to make this easy,
"rouse_cb" and "rouse_wait".
The first function, "rouse_cb", generates and returns a callback that,
when invoked, will save its arguments and notify the coro that created
the callback.
The second function, "rouse_wait", waits for the callback to be called
(by calling "schedule" to go to sleep) and returns the arguments
originally passed to the callback.
Using these functions, it becomes easy to write the "wait_for_child"
function mentioned above:
sub wait_for_child($) {
my ($pid) = @_;
my $watcher = AnyEvent->child (pid => $pid, cb => rouse_cb);
( run in 0.387 second using v1.01-cache-2.11-cpan-39bf76dae61 )