App-Netsync
view release on metacpan or search on metacpan
share/mib/ADSL-LINE-MIB.txt view on Meta::CPAN
adslLineConfProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create a new row or modify or
delete an existing row in this table.
A profile activated by setting this object to
`active'. When `active' is set, the system
will validate the profile.
Before a profile can be deleted or taken out of
service, (by setting this object to `destroy' or
`outOfService') it must be first unreferenced
from all associated lines.
If the implementator of this MIB has chosen not
to implement `dynamic assignment' of profiles, this
object's MIN-ACCESS is read-only and its value
is always to be `active'."
share/mib/ADSL-LINE-MIB.txt view on Meta::CPAN
adslLineAlarmConfProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create a new row or modify or
delete an existing row in this table.
A profile activated by setting this object to
`active'. When `active' is set, the system
will validate the profile.
Before a profile can be deleted or taken out of
service, (by setting this object to `destroy' or
`outOfService') it must be first unreferenced
from all associated lines.
If the implementator of this MIB has chosen not
to implement `dynamic assignment' of profiles, this
object's MIN-ACCESS is read-only and its value
is always to be `active'."
share/mib/CISCO-IETF-IP-MIB.my view on Meta::CPAN
cIpAddressPfxAdvValidLifetime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The length of time in seconds that this prefix will
remain valid, i.e. time until invalidation. A value of
4,294,967,295 represents infinity.
The address generated from an invalidated prefix should
not appear as the destination or source address of a
packet."
::= { cIpAddressPfxEntry 9 }
--
-- Internet Address Table
--
cIpAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF CIpAddressEntry
share/mib/CISCO-IETF-IP-MIB.my view on Meta::CPAN
DESCRIPTION
"The value of sysUpTime at the time this entry was last
updated. If this entry was updated prior to the last re-
initialization of the local network management subsystem,
then this object contains a zero value."
::= { cInetNetToMediaEntry 4 }
cInetNetToMediaType OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
invalid(2), -- an invalidated mapping
dynamic(3),
static(4),
local(5) -- local interface
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of mapping.
Setting this object to the value invalid(2) has the
effect of invalidating the corresponding entry in the
cInetNetToMediaTable. That is, it effectively
disassociates the interface identified with said entry
from the mapping identified with said entry. It is an
implementation-specific matter as to whether the agent
removes an invalidated entry from the table.
Accordingly, management stations must be prepared to
receive tabular information from agents that corresponds
to entries not currently in use. Proper interpretation
of such entries requires examination of the relevant
cInetNetToMediaType object.
The 'dynamic(3)' type indicates that the IP address to
physical addresses mapping has been dynamically resolved
using e.g. IPv4 ARP or the IPv6 Neighbor Discovery
protocol.
share/mib/CISCO-IETF-IP-MIB.my view on Meta::CPAN
::= { cInetNetToMediaEntry 5 }
cInetNetToMediaState OBJECT-TYPE
SYNTAX INTEGER {
reachable(1), -- confirmed reachability
stale(2), -- unconfirmed reachability
delay(3), -- waiting for reachability
-- confirmation before entering
-- the probe state
probe(4), -- actively probing
invalid(5), -- an invalidated mapping
unknown(6), -- state can not be determined
-- for some reason.
incomplete(7) -- address resolution is being
-- performed.
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Neighbor Unreachability Detection [3] state for the
interface when the address mapping in this entry is used.
share/mib/FOUNDRY-SN-SWITCH-GROUP-MIB.mib view on Meta::CPAN
a method to authenticate the user login process. Each octet
has the following enumeration value:
enable(1) - authenticate by command line interface
enable password
radius(2) - authenticate by requesting radius server
local(3) - authenticate by local user account table
line(4) - authenticate by telnet password
tacplus(5) - authenticate by requesting tacplus server
none(6) - do not authenticate
tacacs(7) - authenticate by requesting tacacs server
Setting a zero length octet string invalidates all
previous authentication methods."
::= { snRadiusGeneral 7 }
snRadiusEnableMethod OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..7))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A sequence of authentication methods. Each octet represents
a method to authenticate the user entering priviledge mode
of the command line interface. Each octet has the following
enumeration value:
enable(1) - authenticate by command line interface
enable password
radius(2) - authenticate by requesting radius server
local(3) - authenticate by local user account table
line(4) - authenticate by telnet password
tacplus(5) - authenticate by requesting tacplus server
none(6) - do not authenticate
tacacs(7) - authenticate by requesting tacacs server
Setting a zero length octet string invalidates all
previous authentication methods."
::= { snRadiusGeneral 8 }
snRadiusWebServerMethod OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..7))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A sequence of authentication methods. Each octet represents
a method to authenticate the user accessing the web-server.
Each octet has the following enumeration value:
enable(1) - authenticate by command line interface
enable password
radius(2) - authenticate by requesting radius server
local(3) - authenticate by local user account table
line(4) - authenticate by telnet password
tacplus(5) - authenticate by requesting tacplus server
none(6) - do not authenticate
tacacs(7) - authenticate by requesting tacacs server
Setting a zero length octet string invalidates all
previous authentication methods."
::= { snRadiusGeneral 9 }
snRadiusSNMPServerMethod OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..7))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A sequence of authentication methods. Each octet represents
a method to authenticate the user accessing the snmp-server.
Each octet has the following enumeration value:
enable(1) - authenticate by command line interface
enable password
radius(2) - authenticate by requesting radius server
local(3) - authenticate by local user account table
line(4) - authenticate by telnet password
tacplus(5) - authenticate by requesting tacplus server
none(6) - do not authenticate
tacacs(7) - authenticate by requesting tacacs server
Setting a zero length octet string invalidates all
previous authentication methods."
::= { snRadiusGeneral 10 }
-- Radius server table
-- snRadiusServerTable is deprecated, replaced by fdryRadiusServerTable
-- The new table "fdryRadiusServerTable" combines Ipv4 and Ipv6 Radius Authentication Servers configuration
snRadiusServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRadiusServerEntry
MAX-ACCESS not-accessible
share/mib/FOUNDRY-SN-SWITCH-GROUP-MIB.mib view on Meta::CPAN
SYNTAX OCTET STRING (SIZE(0..3))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A sequence of authorization methods. Each octet represents
a method to authorize the user command. Each octet
has the following value:
radius(2) - authorize by requesting radius server
tacplus(5) - authorize by requesting tacplus server
none(6) - skip authorization
Setting a zero length octet string invalidates all
previous authorization methods."
::= { snAuthorization 1 }
snAuthorizationCommandLevel OBJECT-TYPE
SYNTAX INTEGER {
level0(0),
level4(4),
level5(5)
}
MAX-ACCESS read-write
share/mib/FOUNDRY-SN-SWITCH-GROUP-MIB.mib view on Meta::CPAN
SYNTAX OCTET STRING (SIZE(0..3))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A sequence of exec authorization methods. Each octet represents
a method for telnet or SSH login authorization. Each octet
has the following enumeration value:
radius(2) - send exec authorization request to radius server
tacplus(5) - send exec authorization request to tacplus server
none(6) - no exec authorization
Setting a zero length octet string invalidates all
authorization methods."
::= { snAuthorization 3 }
snAccountingCommandMethods OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..3))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A sequence of accounting methods. Each octet represents
a method to account for the user command. Each octet
has the following enumeration value:
radius(2) - send accounting info to radius server
tacplus(5) - send accounting info to tacplus server
none(6) - skip accounting
Setting a zero length octet string invalidates all
previous accounting methods."
::= { snAccounting 1 }
snAccountingCommandLevel OBJECT-TYPE
SYNTAX INTEGER {
level0(0),
level4(4),
level5(5)
}
MAX-ACCESS read-write
share/mib/FOUNDRY-SN-SWITCH-GROUP-MIB.mib view on Meta::CPAN
SYNTAX OCTET STRING (SIZE(0..3))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A sequence of accounting methods. Each octet represents
a method for telnet or SSH login accounting. Each octet
has the following enumeration value:
radius(2) - send accounting info to radius server
tacplus(5) - send accounting info to tacplus server
none(6) - skip accounting
Setting a zero length octet string invalidates all
previous accounting methods."
::= { snAccounting 3 }
snAccountingSystem OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..3))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A sequence of accounting methods. Each octet represents
a method to account for the system related events. Each octet
has the following enumeration value:
radius(2) - send accounting info to radius server
tacplus(5) - send accounting info to tacplus server
none(6) - skip accounting
Setting a zero length octet string invalidates all
previous accounting methods."
::= { snAccounting 4 }
-- NetFlow Mib
snNetFlowGlb OBJECT IDENTIFIER ::= { snNetFlow 1 }
snNetFlowGblEnable OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
MAX-ACCESS read-write
share/mib/lldp.mib view on Meta::CPAN
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the complete set of information
advertised by a particular MSAP has been deleted from tables
contained in lldpRemoteSystemsData and lldpExtensions objects
because the information timeliness interval has expired.
This counter should be incremented only once when the complete
set of information is completely invalidated (aged out)
from all related tables. Partial aging, similar to deletion
case, is not allowed, and thus, should not change the value
of this counter."
::= { lldpStatistics 5 }
--
-- TX statistics
--
lldpStatsTxPortTable OBJECT-TYPE
share/mib/lldp.mib view on Meta::CPAN
on the indicated port only.
This counter should be set to zero during agent initialization
and its value should not be saved in non-volatile storage.
When a port's admin status changes from 'disabled' to
'rxOnly', 'txOnly' or 'txAndRx', the counter associated with
the same port should reset to 0. The agent should also flush
all remote system information associated with the same port.
This counter should be incremented only once when the
complete set of information is invalidated (aged out) from
all related tables on a particular port. Partial aging
is not allowed, and thus, should not change the value of
this counter."
REFERENCE
"IEEE 802.1AB-2005 10.5.2.2"
::= { lldpStatsRxPortEntry 7 }
-- ***********************************************************
--
-- L O C A L S Y S T E M D A T A
( run in 0.489 second using v1.01-cache-2.11-cpan-a5abf4f5562 )