App-Netsync
view release on metacpan or search on metacpan
share/mib/ADSL-LINE-MIB.txt view on Meta::CPAN
"Configured allocation ratio of excess transmit
bandwidth between fast and interleaved channels. Only
applies when two channel mode and RADSL are supported.
Distribute bandwidth on each channel in excess of the
corresponding ChanConfMinTxRate so that:
adslAtucConfRateChanRatio =
[Fast / (Fast + Interleaved)] * 100
In other words this value is the fast channel
percentage."
::= { adslLineConfProfileEntry 3 }
adslAtucConfTargetSnrMgn OBJECT-TYPE
SYNTAX INTEGER (0..310)
UNITS "tenth dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Configured Target Signal/Noise Margin.
This is the Noise Margin the modem must achieve
share/mib/ADSL-LINE-MIB.txt view on Meta::CPAN
"Configured allocation ratio of excess transmit
bandwidth between fast and interleaved channels. Only
applies when two channel mode and RADSL are supported.
Distribute bandwidth on each channel in excess of the
corresponding ChanConfMinTxRate so that:
adslAturConfRateChanRatio =
[Fast / (Fast + Interleaved)] * 100
In other words this value is the fast channel
percentage."
::= { adslLineConfProfileEntry 17 }
adslAturConfTargetSnrMgn OBJECT-TYPE
SYNTAX INTEGER (0..310)
UNITS "tenth dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Configured Target Signal/Noise Margin.
This is the Noise Margin the modem must achieve
share/mib/CISCO-STACK-MIB.my view on Meta::CPAN
concentrator is reset. The current attachment
type can be determined from snmpFddiPORTPCType
for ports 1 and 2."
DEFVAL { dualAttach }
::= { systemGrp 7 }
sysTraffic OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Traffic meter value, i.e. the percentage of
bandwidth utilization for the previous polling
interval."
::= { systemGrp 8 }
sysReset OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
reset(2), -- resetting the system
resetMinDown(3) -- reset in minimal down time
}
share/mib/CISCO-STACK-MIB.my view on Meta::CPAN
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type of traffic meter."
::= { sysTrafficMeterEntry 1 }
sysTrafficMeter OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Traffic meter value, i.e. the percentage of
bandwidth utilization for the previous polling
interval."
::= { sysTrafficMeterEntry 2 }
sysTrafficMeterPeak OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Peak traffic meter value since the system
started."
share/mib/CISCO-STACK-MIB.my view on Meta::CPAN
DESCRIPTION "Indicates the timeout interval in seconds for
errdisable timeout feature."
DEFVAL { 300 }
::= { systemGrp 56 }
sysTrafficMonitorHighWaterMark OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Indicates the high watermark for the switching
bus traffic in percentage. Syslog messages will be
generated if the switching bus traffic goes over
this object value during the polling interval.
Setting this object value to 100 would mean no
syslog message would be generated. For systems
with 3 switching buses, high watermark and syslog
will be for each switching bus."
DEFVAL { 100 }
::= { systemGrp 57 }
sysHighAvailabilityEnable OBJECT-TYPE
share/mib/CISCO-STACK-MIB.my view on Meta::CPAN
exists a value other than 0 is valid, indicating a
clear key operation. In read, the current key size
is returned if a key exists. If not,a 0 is
returned."
::= { systemGrp 63 }
sysMaxRmonMemory OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Indicates the maximum percentage of the memory
usage for RMON."
::= { systemGrp 64 }
sysMacReductionAdminEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Indicates whether Mac Reduction feature (to
reduce the number of MAC addresses used in
bridge identifier) is administratively enabled
share/mib/CISCO-STACK-MIB.my view on Meta::CPAN
unicast suppression when
filterPortSuppressionOption is enabled."
DEFVAL { 0 }
::= { filterPortEntry 4 }
filterPortBroadcastThreshold OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Indicates the integer part of the maximum
percentage of available bandwidth allowed for
incoming traffic of the specific traffic types on
this port. The associated object
filterPortBroadcastThresholdFraction indicates the
fraction part of the maximum percentage of
available bandwidth allowed for incoming traffic
of the specific traffic types on this port. Either
packets of the specific traffic types are dropped
of the port is put into errdisable state depending
on the value of filterPortSuppressionViolation on
this port if the percentage of incoming traffic of
the specific traffic types would exceed this
limit. The traffic types that are enabled for
this traffic suppression feature is indicated by
filterPortBroadcastOption.
The maximum percentage for the combination of this
object value and the object value of
filterPortBroadcastThresholdFraction is 100.00
which indicates traffic of all traffic types
should not be limited.
The ability to suppress traffic in this manner
exists only on certain ports. If it does not
exist on this port, attempts to write a value of
this object other than 100 are rejected.
share/mib/CISCO-STACK-MIB.my view on Meta::CPAN
DESCRIPTION "The number of packets discarded due to traffic
suppression on this port."
::= { filterPortEntry 6 }
filterPortBroadcastThresholdFraction OBJECT-TYPE
SYNTAX INTEGER (0..99)
UNITS "one-hundredths"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Indicates the fraction part of the maximum
percentage of available bandwidth allowed for
incoming traffic of the specific traffic types on
this port. The associated object
filterPortBroadcastThreshold indicates the integer
part of the maximum percentage of available
bandwidth allowed for incoming traffic of the
specific traffic types on this port. Either
packets of the specific traffic types are dropped
or the port is put into errdisable state
depending on the value of
filterPortSuppressionViolation on this port if the
percentage of incoming traffic of the specific
traffic type would exceed this limit. The
traffic types that are enabled for this traffic
suppression feature is indicated by
filterPortBroadcastOption.
The maximum percentage for the combination
of this object value and the object value of
filterPortBroadcastThreshold is 100.00 which
indicates traffic of all traffic types should not
be limited.
The ability to suppress traffic in this manner
exists only on certain ports. If it does not exist
on this port, attempts to write a value of this
object other than 100 are rejected.
share/mib/CISCO-STACK-MIB.my view on Meta::CPAN
::= { filterPortEntry 8 }
filterPortSuppressionViolation OBJECT-TYPE
SYNTAX INTEGER {
dropPackets(1),
errdisable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Indicates the action that will be taken on this
port when the percentage of either broadcast,
multicast or unicast traffic exceeds the limit as
indicated by filterPortBroadcastThreshold and
filterPortBroadcastThresholdFraction.
dropPackets - the excessive packets will be
- dropped on this port.
errdisable - the port will be put into errdisable
- state.
share/mib/CISCO-STACK-MIB.my view on Meta::CPAN
portCpbChannel OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the channelling capability of a port."
::= { portCpbEntry 7 }
portCpbBroadcastSuppression OBJECT-TYPE
SYNTAX BITS { pps(0),
percentage(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the broadcast suppression capability of
a port. The pps(0) is for ports capable of
specifying suppression in packets per second and
percentage(1) is for ports capable of specifying
suppression in terms of percentage of bandwidth."
::= { portCpbEntry 8 }
portCpbFlowControl OBJECT-TYPE
SYNTAX BITS { receiveOff(0),
receiveOn(1),
receiveDesired(2),
sendOff(3),
sendOn(4),
sendDesired(5) }
MAX-ACCESS read-only
share/mib/FOUNDRY-SN-AGENT-MIB.mib view on Meta::CPAN
STATUS current
DESCRIPTION
"The statistics collection of 1 minute CPU utilization."
::= { snAgentGbl 52 }
snAgGblDynMemUtil OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The system dynamic memory utilization, in unit of percentage.
Deprecated: Refer to snAgSystemDRAMUtil.
For NI platforms, refer to snAgentBrdMemoryUtil100thPercent"
::= { snAgentGbl 53 }
snAgGblDynMemTotal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The total amount of system dynamic memory, in number of bytes.
share/mib/FOUNDRY-SN-AGENT-MIB.mib view on Meta::CPAN
module part number has not been programmed within
EEPROM or the module does not support part number within EEPROM."
::= { snAgentBrdEntry 27 }
snAgentBrdMemoryUtil100thPercent OBJECT-TYPE
SYNTAX Unsigned32 (0..10000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Dynamic memory utilization within this module in units
of one-hundredth of a percent. "
::= { snAgentBrdEntry 28 }
-- Agent Stacking Board Table
snAgentBrd2Table OBJECT-TYPE
SYNTAX SEQUENCE OF SnAgentBrd2Entry
MAX-ACCESS not-accessible
share/mib/FOUNDRY-SN-AGENT-MIB.mib view on Meta::CPAN
"The value, in seconds, for this utilization. For both management and slave CPU, we display
utilization for 1 sec, 5 sec, 60 sec and 300 sec interval."
::= { snAgentCpuUtilEntry 3 }
snAgentCpuUtilValue OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The statistical CPU utilization in units of one-hundredth
of a percent. This value is deprecated. Users are recommended
to use snAgentCpuUtilPercent or snAgentCpuUtil100thPercent
instead."
::= { snAgentCpuUtilEntry 4 }
snAgentCpuUtilPercent OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The statistical CPU utilization in units of a percent."
::= { snAgentCpuUtilEntry 5 }
snAgentCpuUtil100thPercent OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The statistical CPU utilization in units of one-hundredth
of a percent."
::= { snAgentCpuUtilEntry 6 }
-- System Process Utilization Table.
snCpuProcessTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnCpuProcessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table to list utilization and runtime for all CPU processes in the device."
share/mib/FOUNDRY-SN-AGENT-MIB.mib view on Meta::CPAN
::= { snCAMStatEntry 27 }
-- System DRAM info Group.
snAgSystemDRAM OBJECT IDENTIFIER ::= { snAgentHw 4 }
snAgSystemDRAMUtil OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The system dynamic memory utilization, in unit of percentage."
::= { snAgSystemDRAM 1 }
snAgSystemDRAMTotal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total amount of system dynamic memory, in number of bytes."
::= { snAgSystemDRAM 2 }
share/mib/FOUNDRY-SN-SWITCH-GROUP-MIB.mib view on Meta::CPAN
"The number of packets per second transmitted out of the interface
over a 5 minutes interval."
::= { snSwPortInfoEntry 45 }
snSwPortStatsInUtilization OBJECT-TYPE
SYNTAX INTEGER (0..10000)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The input network utilization in hundredths of a percent
over a 5 minutes interval."
::= { snSwPortInfoEntry 46 }
snSwPortStatsOutUtilization OBJECT-TYPE
SYNTAX INTEGER (0..10000)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The output network utilization in hundredths of a percent
over a 5 minutes interval."
::= { snSwPortInfoEntry 47 }
snSwPortFastSpanPortEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-write
STATUS deprecated
share/mib/FOUNDRY-SN-SWITCH-GROUP-MIB.mib view on Meta::CPAN
DESCRIPTION
"The number of packets per second transmitted out of the interface
over a 5 minutes interval."
::= { snSwIfInfoEntry 51 }
snSwIfStatsInUtilization OBJECT-TYPE
SYNTAX INTEGER (0..10000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The input network utilization in hundredths of a percent
over a 5 minutes interval."
::= { snSwIfInfoEntry 52 }
snSwIfStatsOutUtilization OBJECT-TYPE
SYNTAX INTEGER (0..10000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The output network utilization in hundredths of a percent
over a 5 minutes interval."
::= { snSwIfInfoEntry 53 }
snSwIfStatsInKiloBitsPerSec OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bit rate in kilobits per second received on the 10G and
faster interface over a 5 minutes interval."
share/mib/POWER-ETHERNET-MIB.txt view on Meta::CPAN
DESCRIPTION
"Measured usage power expressed in Watts."
::= { pethMainPseEntry 4 }
pethMainPseUsageThreshold OBJECT-TYPE
SYNTAX Integer32 (1..99)
UNITS "%"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The usage threshold expressed in percents for
comparing the measured power and initiating
an alarm if the threshold is exceeded."
::= { pethMainPseEntry 5 }
-- Notification Control Objects
pethNotificationControl OBJECT IDENTIFIER ::= { pethObjects 4 }
pethNotificationControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF PethNotificationControlEntry
( run in 0.472 second using v1.01-cache-2.11-cpan-05162d3a2b1 )