DBD-SQLcipher
view release on metacpan or search on metacpan
** selectively disable various optimizations.
*/
#define SQLITE_QueryFlattener 0x0001 /* Query flattening */
#define SQLITE_ColumnCache 0x0002 /* Column cache */
#define SQLITE_GroupByOrder 0x0004 /* GROUPBY cover of ORDERBY */
#define SQLITE_FactorOutConst 0x0008 /* Constant factoring */
/* not used 0x0010 // Was: SQLITE_IdxRealAsInt */
#define SQLITE_DistinctOpt 0x0020 /* DISTINCT using indexes */
#define SQLITE_CoverIdxScan 0x0040 /* Covering index scans */
#define SQLITE_OrderByIdxJoin 0x0080 /* ORDER BY of joins via index */
#define SQLITE_SubqCoroutine 0x0100 /* Evaluate subqueries as coroutines */
#define SQLITE_Transitive 0x0200 /* Transitive constraints */
#define SQLITE_OmitNoopJoin 0x0400 /* Omit unused tables in joins */
#define SQLITE_Stat34 0x0800 /* Use STAT3 or STAT4 data */
#define SQLITE_AllOpts 0xffff /* All optimizations */
/*
** Macros for testing whether or not optimizations are enabled or disabled.
*/
#ifndef SQLITE_OMIT_BUILTIN_TEST
#define OptimizationDisabled(db, mask) (((db)->dbOptFlags&(mask))!=0)
case OP_Return: { /* in1 */
pIn1 = &aMem[pOp->p1];
assert( pIn1->flags==MEM_Int );
pc = (int)pIn1->u.i;
pIn1->flags = MEM_Undefined;
break;
}
/* Opcode: InitCoroutine P1 P2 P3 * *
**
** Set up register P1 so that it will Yield to the coroutine
** located at address P3.
**
** If P2!=0 then the coroutine implementation immediately follows
** this opcode. So jump over the coroutine implementation to
** address P2.
**
** See also: EndCoroutine
*/
case OP_InitCoroutine: { /* jump */
assert( pOp->p1>0 && pOp->p1<=(p->nMem-p->nCursor) );
assert( pOp->p2>=0 && pOp->p2<p->nOp );
assert( pOp->p3>=0 && pOp->p3<p->nOp );
pOut = &aMem[pOp->p1];
assert( !VdbeMemDynamic(pOut) );
assert( pCaller->opcode==OP_Yield );
assert( pCaller->p2>=0 && pCaller->p2<p->nOp );
pc = pCaller->p2 - 1;
pIn1->flags = MEM_Undefined;
break;
}
/* Opcode: Yield P1 P2 * * *
**
** Swap the program counter with the value in register P1. This
** has the effect of yielding to a coroutine.
**
** If the coroutine that is launched by this instruction ends with
** Yield or Return then continue to the next instruction. But if
** the coroutine launched by this instruction ends with
** EndCoroutine, then jump to P2 rather than continuing with the
** next instruction.
**
** See also: InitCoroutine
*/
case OP_Yield: { /* in1, jump */
int pcDest;
pIn1 = &aMem[pOp->p1];
assert( VdbeMemDynamic(pIn1)==0 );
pIn1->flags = MEM_Int;
** The generated code follows this template:
**
** X <- A
** goto B
** A: setup for the SELECT
** loop over the rows in the SELECT
** load values into registers R..R+n
** yield X
** end loop
** cleanup after the SELECT
** end-coroutine X
** B: open write cursor to <table> and its indices
** C: yield X, at EOF goto D
** insert the select result into <table> from R..R+n
** goto C
** D: cleanup
**
** The 4th template is used if the insert statement takes its
** values from a SELECT but the data is being inserted into a table
** that is also read as part of the SELECT. In the third form,
** we have to use an intermediate table to store the results of
**
** A temp table must be used if the table being updated is also one
** of the tables being read by the SELECT statement. Also use a
** temp table in the case of row triggers.
*/
if( pTrigger || readsTable(pParse, iDb, pTab) ){
useTempTable = 1;
}
if( useTempTable ){
/* Invoke the coroutine to extract information from the SELECT
** and add it to a transient table srcTab. The code generated
** here is from the 4th template:
**
** B: open temp table
** L: yield X, goto M at EOF
** insert row from R..R+n into temp table
** goto L
** M: ...
*/
int regRec; /* Register to hold packed record */
multi_select_end:
pDest->iSdst = dest.iSdst;
pDest->nSdst = dest.nSdst;
sqlite3SelectDelete(db, pDelete);
return rc;
}
#endif /* SQLITE_OMIT_COMPOUND_SELECT */
/*
** Code an output subroutine for a coroutine implementation of a
** SELECT statment.
**
** The data to be output is contained in pIn->iSdst. There are
** pIn->nSdst columns to be output. pDest is where the output should
** be sent.
**
** regReturn is the number of the register holding the subroutine
** return address.
**
** If regPrev>0 then it is the first register in a vector that
** Alternative compound select code generator for cases when there
** is an ORDER BY clause.
**
** We assume a query of the following form:
**
** <selectA> <operator> <selectB> ORDER BY <orderbylist>
**
** <operator> is one of UNION ALL, UNION, EXCEPT, or INTERSECT. The idea
** is to code both <selectA> and <selectB> with the ORDER BY clause as
** co-routines. Then run the co-routines in parallel and merge the results
** into the output. In addition to the two coroutines (called selectA and
** selectB) there are 7 subroutines:
**
** outA: Move the output of the selectA coroutine into the output
** of the compound query.
**
** outB: Move the output of the selectB coroutine into the output
** of the compound query. (Only generated for UNION and
** UNION ALL. EXCEPT and INSERTSECT never output a row that
** appears only in B.)
**
** AltB: Called when there is data from both coroutines and A<B.
**
** AeqB: Called when there is data from both coroutines and A==B.
**
** AgtB: Called when there is data from both coroutines and A>B.
**
** EofA: Called when data is exhausted from selectA.
**
** EofB: Called when data is exhausted from selectB.
**
** The implementation of the latter five subroutines depend on which
** <operator> is used:
**
**
** UNION ALL UNION EXCEPT INTERSECT
** In the AltB, AeqB, and AgtB subroutines, an EOF on A following nextA
** causes an immediate jump to EofA and an EOF on B following nextB causes
** an immediate jump to EofB. Within EofA and EofB, and EOF on entry or
** following nextX causes a jump to the end of the select processing.
**
** Duplicate removal in the UNION, EXCEPT, and INTERSECT cases is handled
** within the output subroutine. The regPrev register set holds the previously
** output value. A comparison is made against this value and the output
** is skipped if the next results would be the same as the previous.
**
** The implementation plan is to implement the two coroutines and seven
** subroutines first, then put the control logic at the bottom. Like this:
**
** goto Init
** coA: coroutine for left query (A)
** coB: coroutine for right query (B)
** outA: output one row of A
** outB: output one row of B (UNION and UNION ALL only)
** EofA: ...
** EofB: ...
** AltB: ...
** AeqB: ...
** AgtB: ...
** Init: initialize coroutine registers
** yield coA
** if eof(A) goto EofA
** yield coB
** if eof(B) goto EofB
** Cmpr: Compare A, B
** Jump AltB, AeqB, AgtB
** End: ...
**
** We call AltB, AeqB, AgtB, EofA, and EofB "subroutines" but they are not
** actually called using Gosub and they do not Return. EofA and EofB loop
*/
#ifndef SQLITE_OMIT_COMPOUND_SELECT
static int multiSelectOrderBy(
Parse *pParse, /* Parsing context */
Select *p, /* The right-most of SELECTs to be coded */
SelectDest *pDest /* What to do with query results */
){
int i, j; /* Loop counters */
Select *pPrior; /* Another SELECT immediately to our left */
Vdbe *v; /* Generate code to this VDBE */
SelectDest destA; /* Destination for coroutine A */
SelectDest destB; /* Destination for coroutine B */
int regAddrA; /* Address register for select-A coroutine */
int regAddrB; /* Address register for select-B coroutine */
int addrSelectA; /* Address of the select-A coroutine */
int addrSelectB; /* Address of the select-B coroutine */
int regOutA; /* Address register for the output-A subroutine */
int regOutB; /* Address register for the output-B subroutine */
int addrOutA; /* Address of the output-A subroutine */
int addrOutB = 0; /* Address of the output-B subroutine */
int addrEofA; /* Address of the select-A-exhausted subroutine */
int addrEofA_noB; /* Alternate addrEofA if B is uninitialized */
int addrEofB; /* Address of the select-B-exhausted subroutine */
int addrAltB; /* Address of the A<B subroutine */
int addrAeqB; /* Address of the A==B subroutine */
int addrAgtB; /* Address of the A>B subroutine */
sqlite3ExprDelete(db, p->pOffset);
p->pOffset = 0;
regAddrA = ++pParse->nMem;
regAddrB = ++pParse->nMem;
regOutA = ++pParse->nMem;
regOutB = ++pParse->nMem;
sqlite3SelectDestInit(&destA, SRT_Coroutine, regAddrA);
sqlite3SelectDestInit(&destB, SRT_Coroutine, regAddrB);
/* Generate a coroutine to evaluate the SELECT statement to the
** left of the compound operator - the "A" select.
*/
addrSelectA = sqlite3VdbeCurrentAddr(v) + 1;
j1 = sqlite3VdbeAddOp3(v, OP_InitCoroutine, regAddrA, 0, addrSelectA);
VdbeComment((v, "left SELECT"));
pPrior->iLimit = regLimitA;
explainSetInteger(iSub1, pParse->iNextSelectId);
sqlite3Select(pParse, pPrior, &destA);
sqlite3VdbeAddOp1(v, OP_EndCoroutine, regAddrA);
sqlite3VdbeJumpHere(v, j1);
/* Generate a coroutine to evaluate the SELECT statement on
** the right - the "B" select
*/
addrSelectB = sqlite3VdbeCurrentAddr(v) + 1;
j1 = sqlite3VdbeAddOp3(v, OP_InitCoroutine, regAddrB, 0, addrSelectB);
VdbeComment((v, "right SELECT"));
savedLimit = p->iLimit;
savedOffset = p->iOffset;
p->iLimit = regLimitB;
p->iOffset = 0;
explainSetInteger(iSub2, pParse->iNextSelectId);
( run in 0.398 second using v1.01-cache-2.11-cpan-3cd7ad12f66 )